Manual Thermometer Limit 60
Digital thermometer with two inputs for measuring with two probes at same time.
Up to 99 measurements can be stored over a period of time, by setting automatic logging
interval or manually stored. Stored measurements can be transfer to PC.
The display shows Max-Min-Average and difference between two probes. Hold function.
Easy to compensate for errors of a probe. Display backlight. Switchable between °C and °F
Warning of low battery capacity. Probes of type K, J, T and E can be used.
Specification
Range type K °C -200 … +1370
Reading °C 0,1
Accuracy °C 0,8 ± 0,5 %
Operation temperature °C -10 … +50
Storage temperature °C -40 … +60
Dimension mm 175x85x30
Weight g 270
Battery 1 pc 9 V 6F22
Saftey informations
CE. Safety EN55022, EN55024
EN61326 Electrical equipment for measurement, control and laboratory use.
Buttons
On / Off
On / Off Display backlight
HOLD On / Off Display backlight
°C°F K Select between Celsius Fahrenheit and Kelvin.
MAX/MIN Toggle between max, min, and average.
T1 T2 T1-T2 Toggle between T1 and T2 and different between T1 and T2.
SEND Enter USB mode for connection to PC.
STORE Start logging mode. Memory for 99 readings.
RECALL Show logged readings.
SETUP Start and exit setups
Increase and decrease by setup.
ENTER Confirm setup.
SET UP Toggle with SETUP button between the different setup options.
Confirm selected setup with ENTER.
Logging interval Display shows INTERVAL. Select logging interval.
Press with Interval from 0:01 to max 59:59 minutes.
For manual interval set 0:00.
Probe type Display shows TYPE. Select type K, J, T or E with .
Chance Offset Display shows OFFSET T1. Press with until the display
shows correct reading for T1 . Repeat for T2.