Lincoln 1215 User manual

Models 1215 & 1215A
PowerLuber Battery Charger
Form 403531
This manual contains important safety and operating instruc-
tion for Lincoln Models 1215 and 1215A Battery Charger.
Battery charger uses a standard cigarette lighter plug.
1. Before using this battery charger, read all instructions and
cautionary markings on Battery Charger, Battery Pack, and
product using battery.
2. CAUTION: To reduce the risk of injury, Lincoln Model 1215
or 1215A Chargers should only be used to charge Lincoln
battery pack Model 1201. Other types of batteries may
burst causing personal injury and damage. Do not charge
Lincoln Model 1201 Battery Packs with any other charger.
3. Do not expose charger to moisture (rain, snow or frost).
4. Do not abuse cord. Never carry charger by cord or yank it
to disconnect from battery outlet. Pull by plug rather than
cord when disconnecting charger. Replace damaged or
worn power cord and strain reliever immediately.
5. Make sure cord is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress.
6. Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way, take it to
a qualified serviceman.
7. Do not disassemble charger or battery pack. Take it to a
qualified serviceman when service or repair is required.
Incorrect reassembly may result in risk of electrical shock
or fire.
8. Unplug charger from battery outlet before attempting any
maintenance or cleaning to reduce risk of electric shock.
9. Charge the battery pack in a well ventilated place, do
not cover the charger and battery with a cloth, etc., while
charging.
10. Do not store the charger or battery packs in locations
(such as a metal tool shed, or a car in the summer) where
the temperature may reach or exceed 122° F (50° C),
which can lead to deterioration of the storage battery.
11. Do not charge battery pack when the temperature is BE-
LOW 32° F (0° C)or ABOVE 104° F (40° C). This is very
important for proper operation.
12. Do not incinerate battery pack It can explode in a fire.
13. Do not short across the terminals of the battery pack.
EXTREMELY HIGH TEMPERATURES COULD CAUSE
PERSONAL INJURY OR FIRE.
14. Dispose of expended battery’s properly. The Lincoln Model
1201 Battery Pack contains rechargeable, nickel-cadmium
batteries. These batteries must be recycled or disposed
of properly. Drop off expended battery packs at your local
replacement battery retailer, or your recycling center.
* New batteries are shipped in an uncharged state and the
initial charge will require 12 hours before use.
INSTRUCTIONS FOR CHARGER AND BATTERIES
SAVE THESE INSTRUCTIONS
Americas:
One Lincoln Way
St. Louis, MO 63120-1578
USA
Phone [phone]
Fax [phone]
Europe/Africa:
Heinrich-Hertz-Str 2-8
D-69183 Walldorf
Germany
Phone [phone]
Fax [phone]
Asia/Pacific:
25 Int’l Business Park
#01-65 German Centre
Singapore 609916
Phone [phone]
Fax [phone]
© Copyright 2004
Printed in USA
Web site:
www.lincolnindustrial.com
Product Specifications
Model 1215 Model 1215A
Input Voltage 12 Volts 12/24 Volts
@ 3 amps @ 3/1.25 amps©
Output 14.5 Volts 14.5 Volts
@ 2.5 Amps @ 2.5 Amps
Time to Charge
1201 Battery: 1 Hour 1 Hour
Cord Length 6 ft (2 m) 6 ft (2 m)
Indicator Lights Red Red
(Charging) (Charging)
Green Green
(Complete) Complete)
Weight 1 lb. (.45 Kg) 1 lb. (.45 Kg)
Note: Plug fits 12 V or 24 V cigarette lighter sockets.
15. Charging time will be approximate 1 hour after the initial
charge.
a.) The red fast charge indicator will stay lit until the battery
is near full charge.
b.) The green trickle charge indicator will light and stay lit
until battery is removed from charger.
Do not leave battery plugged into charger for extended
period of time after charged.
Note: If the red fast charge indicator is turning “on” and
“off” frequently, it is an indication of a bad battery, remove
battery from charger and replace the battery.
Users in the United States NOTE:
Applicable fees for the collection and recycling of these batter-
ies have been paid to the RBRCTM. For further information,
call 1-800-8BATTERY.
1215 (12V in - 14.5V out) and
1215A (12/24V in - 14.5V out)
Battery Charger
1201
Battery
© Indicates change

Form 403531
Models 1215 & 1215A
PowerLuber Battery Charger
Declaration of conformity according to EMV directive 89/336/EEG as last amended by EC Directive 93/68/EEC Electro-
magnetic Compatibility.©
We declare that the model of the
Battery Charger
in the version supplied by us, complies with the provisions of the above mentioned directive.
Applied harmonized standards in particular:
EN61000-3-3 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitations of Voltage Fluctuations and Flicker in Low
Voltage Supply Systems for Equipment with Rated Current = 16A - SAME AS IEC 61000-3-3
EN 55014-2 Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools, & Similar Apparatus -
Part 2: Immunity - Product Family Standard
EN55014-1 Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus -
Part 1: Emission - Product Family Standard
EN 61000-3-2 + Amendment 1, + Amendment 2, + Amendment 14 Electromagnetic Compatibility (EMC) Part 3: Limits - Section 2: Limits for
Harmonic Current Emissions (Equipment Input Current <= 16A per Phase)
St. Louis, MO 01/07/04, Paul Conley, Chief Engineer
Lincoln Industrial Standard Warranty
LIMITED WARRANTY
Lincoln warrants the equipment manufactured and supplied by Lincoln to be free from defects in material and workmanship for a period of one
(1) year following the date of purchase, excluding there from any special, extended, or limited warranty published by Lincoln. If equipment is
determined to be defective during this warranty period, it will be repaired or replaced, within Lincoln’s sole discretion, without charge.
This warranty is conditioned upon the determination of a Lincoln authorized representative that the equipment is defective. To obtain repair or
replacement, you must ship the equipment, transportation charges prepaid, with proof of purchase to a Lincoln Authorized Warranty and Service
Center within the warranty period.
This warranty is extended to the original retail purchaser only. This warranty does not apply to equipment damaged from accident, overload,
abuse, misuse, negligence, faulty installation or abrasive or corrosive material, equipment that has been altered, or equipment repaired by any-
one not authorized by Lincoln. This warranty applies only to equipment installed, operated and maintained in strict accordance with the written
specifications and recommendations provided by Lincoln or its authorized field personnel.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIM-
ITED TO, THE WARRANTY OF MERCHANTIBILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
In no event shall Lincoln be liable for incidental or consequential damages. Lincoln’s liability for any claim for loss or damages arising out of the
sale, resale or use of any Lincoln equipment shall in no event exceed the purchase price. Some jurisdictions do not allow the exclusion or limita-
tion of incidental or consequential damages, therefore the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary by jurisdiction.
Customers not located in the Western Hemisphere or East Asia: Please contact Lincoln GmbH & Co. KG, Walldorf, Germany, for your warranty
rights.
Lincoln Industrial Contact Information
To find Lincoln Industrial’s Nearest Service Center call the following numbers, or you may also use our website
Customer Service 314-679-4200
Website lincolnindustrial.com