Lindy 42928 User manual

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (March 2005)
USB Chipcard Reader
with SIM Card Adapter
User Manual English
LINDY No. 42928
www.lindy.com

Introduction
Thank you for purchasing the LINDY Card Reader. This product allows you to read the contents
or your mobile phone’s SIM card and use the supplied software to edit text messages and
phone book entries.
Package Contents
LINDY USB Chipcard Reader
SIM Card Adapter
USB Extension Cable
Installation CD
This manual
Product Information
Power LED: Glows green
when the reader is plugged in
Card Access LED: Glows
red when the SIM card is
being accessed
SIM Card Adapter
Card Reader

Installation
Step 1 - Slide your SIM card into the Adapter
Step 2 - Insert the SIM Card Adapter into the Reader
Step 3 - Plug the Reader into an available USB
port on your computer.

Driver Installation
The following illustration shows the installation process under Windows XP. The procedure is
similar for Windows 98SE, ME and 2000.
1. After you have plugged the Card
Reader into your computer Windows will
detect it and the following screen will be
displayed. Click Cancel and insert the
installation CD into your CD drive:
2. The CD will ‘auto-run’ and the
installation screen will appear. Click on
Install Driver:
3. At the EZMini Driver Setup window
click Yes to continue the installation:

4. Depending on your operating system
you may need to install the Microsoft
Smart Card Base Components. Click
Accept to continue the installation:
5. You will be prompted to restart your
computer, click Yes:

Diagnostics
Once the computer has restarted you can verify correct installation by launching the diagnostics
application – EZ100PU Diagnostics. Select:
Start > All Programs > EZ100PU Utility > EZ100PU Diagnostics
The window below will appear. Click the Diagnostic button at the top of the window to run
diagnostics. Ensure all the checked items have passed.
SIM Card Editor Software Installation
1. Insert the software CD into your CD-
ROM drive. When the menu screen
appears select Install SimEditor:

2. When the InstallShield Wizard screen
appears click Next:
3. At the next screen enter your details
and click Next:
4. Click Next to install the program to the
default folder or Change to install to a
different folder:

5. Review the installation settings and
click Install to proceed:
6. The files will be installed:
7. The installation process is complete.
Click Finish:

SIM Card Editor
Launch the SIM Card Editor software by double-clicking the icon on the desktop
You will see the following screen:
To learn how to use the SIM Card
Editor software, select the Help
option on the menu bar. Here you
will find a comprehensive instruction
guide. Use >> and << to navigate
through the different pages:

Troubleshooting
The Card Reader’s Power LED is not illuminated
Run the diagnostics program to verify correct installation
Check that the PC is correctly powered on and has booted up into Windows
If connecting via a USB hub ensure the hub is correctly installed and powered
Try plugging the Card Reader into another USB port
If using a USB extension cable, try plugging the Card Reader directly into a USB port
The Card Access Power LED does not illuminate when the card is being accessed
Run the diagnostics program to verify correct installation
Check the SIM card is correctly installed in the SIM Card Adapter
Ensure the SIM Card Adapter is fully inserted into the Card Reader
Try using a different SIM Card
If you encounter any other problems or need assistance please contact LINDY technical
support. See our website for details: www.lindy.com

Radio Frequency Energy, Certifications
Shielded cables must be used with this equipment to maintain compliance with radio frequency
energy emission regulations and ensure a suitably high level of immunity to electromagnetic
disturbances.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modification not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
LINDY No. 42928
1st Edition March 2005
www.lindy.com