Lindy 70576 User manual

Low Profile
PCI Card 2P EPP/ECP
LINDY Art. Nr. 70576
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - APR2001
English Manual
Low Profile PCI Card 2P EPP/ECP
Description
The 70576 32Bit PCI bus Plug & Play 2P I/O card is equipped with two ECP/EPP/SPP/BPP IEEE 1284 Centronics
Parallel Interfaces. It includes two 25 pin female connectors for peripherals’ units with IEEE 1284 Centronics Parallel
Interface.
Hardware Specification
Parallel Port:
Parallel Chipset: SUN1888, Hardware FIFO: 32Byte FIFO
Compatible chips: with ACC3203, ST-78C36 and HT6535.
IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface
Max. Speed: up to 2.7MB/Sec
Hardware Installation
½ Turn off the power of your computer
½ Plug the 70576 Parallel Adapter to the PCI bus of your computer
½ Connect the peripheral Printer, Modem, Scanner…etc. to this adapter
½ Turn on the power of your computer
PCI device listing display (for example…)
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please change
the PCI slot. After correct hardware installation you can start installing the software from the driver CD.
Bus No Device No Func. No Vendor ID Device ID Device Class IRQ
0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7268
Simple COMM.
Controller 10

LINDY Art. Nr. 70576
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - APR2001
English Manual
Pin Assignments
Parallel 25Pin female connector pin assignments:
Parallel 25 Pin female connector:
Pin Signal Pin Signal Pin Signal
1 STROBE 10 ACKNOWLEDGE 19 GROUND
2 DATA 0 11 BUSY 20 GROUND
3 DATA 1 12 PAPER EMPTY 21 GROUND
4 DATA 2 13 SELECT 22 GROUND
5 DATA 3 14 AUTO FEED 23 GROUND
6 DATA 4 15 ERROR 24 GROUND
7 DATA 5 16 INIT 25 GROUND
8 DATA 6 17 SELECT INPUT 26 GROUND
9 DATA 7 18 GROUND
Technical Specification
Compatibility: PCI 32Bit card for 486/586/Pentium/PentiumII/III/C5/K6
Operating system: WIN9.x/ME/NT/2000, LINUX, DOS
Chips: 1 x SUN1888
Connections: 2 x DB 25 f connector parallel
PCB: 2 Layer / 120 x 64 mm