Linksys HGA7S Operation manual

Model No.
Product Data
Wireless
HGA7S
Increase the effective range of
your wireless devices!
Increases the
effective range of
Linksys wireless
devices
Easy installation—
simply replace your
current antenna
Stronger signal
increases wireless
coverage into
hard-to-reach areas
Improves throughput
by reducing
retransmissions
Increase the range of your wireless network! Attach this
high gain antenna to your Linksys wireless networking
device, and increase both the effective strength of the
outgoing signals, and the receive sensitivity for incoming
signals.
The added signal strength and sensitivity also improves
close-range communication reliability because every
packet comes through “loud and clear”, reducing
retransmissions due to weak signal reception errors.
To install, just unscrew your current antenna, and attach
the High Gain Antenna in its place. There are no drivers to
install, and no modifications to your setup are necessary.
The Linksys High Gain Antenna saves wiring costs and
helps to build corporate wireless infrastructure by driving
stronger signals into distant corners and hard-to-reach
areas. And it's perfect for covering large areas in
warehouse environments, public spaces, wireless
hotspots, and outdoor venues—anywhere you need
extra coverage for your wireless network.
High Gain Antenna
for R-SMA Connectors

Model No.
Product Data
Model No.
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA 92612 USA
E-mail: [email protected]
[email protected]
Web: http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional Offices
throughout the world. For a complete list of local
Linksys Sales and Technical Support contacts, visit
our Worldwide Web Site at www.linksys.com.
HGA7S
Package Contents
•One High Gain Antenna for R-SMA Connectors
Works with:
•WRV54G
• WMP54GS
• WMP54G
• WET54G
• WET54GS5
• AS1SMA (Antenna Stand)
Specifications
Model Number HGA7S
Peak Gain 7 dBi
Frequency Range 2.4 GHz ~ 2.5 GHz
Voltage Standing
Wave Ratio (VSWR) 1.92 Max.
Polarization Linear Vertical
Direction Omnidirectional
Impedance 50 Ohms Nominal
Connector Reverse SMA
Environmental
Dimensions 11.22" x 0.47"
Length x Diameter (285 mm x 12 mm)
Unit Weight 1.41 oz. (0.04 kg)
Certification FCC
Operating Temp. -20° C to 65° C (-4° F to 149° F)
Storage Temp. -30° C to 75° C (-22° F to 167° F)
Operating Humidity 0 to 85% Non-Condensing
HGA7S-DS-50302
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
High Gain Antenna for R-SMA Connectors
Features
• Increase wireless signal of
your Linksys Wireless-G or
Wireless-B devices
• Omnidirectional design for
360 degrees of coverage
• Easy to install, no
configuration necessary
• 3-year limited warranty