Linksys HGA7T Operation manual

Model No.
Product Data
Wireless
HGA7T
Increase the effective range of
your wireless devices!
Increases the effective
range of Linksys wire-
less devices
Works with both
Wireless-G and
Wireless-B devices
Stronger signal increases wire-
less coverage into hard-to-
reach areas and improves
throughput by reducing
retransmissions
Easy installation --
simply replace
your current
antennas
Increase the range of your Wireless network! Attach these
high gain antennas to your Linksys Wireless Broadband
Router or Access Point, and increase both the effective
strength of the outgoing signals, and the receive sensitivity
for incoming signals.
The added signal strength and sensitivity also improves
close-range communication reliability because every
packet comes through "loud and clear", reducing retrans-
missions due to weak signal reception errors.
To install, just unscrew your current antennas, and attach
the High Gain antennas in their place. There are no driv-
ers to install, and no modifications to your setup are nec-
essary.
The Linksys High Gain Antenna Kit saves wiring costs and
helps to build corporate wireless infrastructure by driving
stronger signals into distant corners and hard-to-reach
areas. And it's perfect for covering large areas in ware-
house environments, public spaces, wireless hotspots,
and outdoor venues -- anywhere you need extra cover-
age for your wireless network.
High Gain Antenna Kit
for R-TNC Connectors

Model No.
Product Data
Model No.
Linksys
A Division of Cisco Systems, Inc.
121Theory
Irvine, CA 92617USA
E-mail: [email protected]
[email protected]
Web: http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional Offices
throughout the world. For a complete list of local
Linksys Sales and Technical Support contacts, visit
our Worldwide Web Site at www.linksys.com.
HGA7T
Package Contents
• Two High Gain Antennasfor
R-TNC Connectors
• One Antenna Stabilizer
Works With:
• WRT54GS
• WRT54G (Up to version 6)
• WAP54G
• BEFW11S4
• WAP11
• AS2TNC (Antenna Stand)
Specifications
Model Number HGA7T
Peak Gain 7 dBi
Frequency Range 2.4GHz ~ 2.5GHz
Voltage Standing
Wave Ratio (VSWR) 1.92 Max.
Polarization Linear Vertical
Direction Omni-directional
Impedance 50 Ohms Nominal
Connector Reverse TNC
Environmental
Dimensions 11.22" x 0.55"
W x H x D (285 mm x 14 mm )
Unit Weight 1.48 oz. (0.04 kg)
Operating Temp. -4ºF to 149ºF (-20ºC to 65ºC)
Storage Temp. -22ºF to 167ºF (-30ºC to 75ºC)
Operating Humidity 0% to 85% Non-Condensing
HGA7T-DS-70921 AI
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
High Gain Antenna Kit for R-TNC Connectors
Features
• Increase wireless signal of your
Linksys Wireless-G or Wireless-B
devices
• Omni-directional design for 360
degrees of coverage
• Easy to install, no configuration
necessary
•1-year limited warranty