Linksys SPA3102 User manual

!
1!
Linksys SPA3102
Thank you for purchasing Linksys SPA 3102.
Package Contents:
•SPA3102 Body
•AC Adapter
•Modular Cable
•Ethernet Cable
•Instruction Manual
Disclaimer
•Product functions and specifications are subject to change without prior notice.
•Quality of call (e.g. choppy line, noise, etc.) may be affected by company’s network
environment.
•Our company does not assume any responsibilities for a difference in call quality due to
personal hearing impairment.
•Our company is not responsible for service that may not be available outside the
country.
•Linksys SPA3102 may temporarily suspend the service for routine maintenance without
prior notice.
•We would not assume any liability for product failure due to device malfunction.

!
2!
Linksys SPA 3102
Analog Calls Routed over the Internet
Internet telephone service is now more accessible than before. The SPA 3102 Voice Gateway
is a part of Cisco Small Business Voice Gateways and ATAs. It allows automatic routing of
local calls from mobile phones and landlines to Voice over Internet Protocol (VoIP) service
providers, and vice versa. Reduce or eliminate long-distance charges by first calling the local
number on the SPA3102.
Calls can be safely redirected to a traditional carrier via standard analog interface in the event
of power loss or Internet access is unavailable.
Additional Features
•One RJ-11 POTS (Plain Old Telephone Service) FXS port for an existing analog phone
or fax machine connection.
•One PSTN FXO port for a Telco or PBX circuit connection.
•Two 100 BaseT RJ-45 Ethernet interfaces for home or office LAN connection and an
Ethernet connection to a broadband modem or router.
•FXS and FXO lines that can be independently configured.
•Secured encryption-based methods for communication, provisioning and servicing.
Router (Back)
Router (Front)
Power: Router gateway Turn on / off
Internet: Supplies Internet connection to the router and
Internet access to PC.
Ethernet: Provides Ethernet connection to PC.
Phone: Device(s) connected to the router (Needs to be
configured to the router first).
Line: Connects the main telephone line to the router for
an analog telecom provider.

!
3!
Installation (hardware)
1. Connect the power cable to your SPA3102.
2. Connect the network cable from your SPA3102 to your DHCP enabled modem / router
OR connect the network cable from your modem to the SPA3102 WAN port and
connect your PC via Ethernet cable to the LAN port of the SPA3102.
3. Connect an analog phone to the [Phone] port in the SPA3102.
4. Turn the power on.
5. Pick up the phone and dial [＊＊＊＊] (You should hear a voice saying Linksys
Configuration Menu.)
6. Dial [110#]. (Write down the IP address that is returned.)
7. Dial [7932#], then dial [1#] to enable the web server, then press [1] to save.
8. Hang up.
9. Connect your PSTN line to the [Line] port of the SPA3102.
* You can opt to upgrade firmware.
Configuring SPA3102 via Web Interface
1. Access the web Interface by opening a web browser and type [http://IPAddress of
SPA3102].
* By default the SPA 3102 does not have a username/password associated with it. If
you are prompted for a username and password, please enter the default username
and password: [user].
2. Click [Admin Login] !click [Advanced].

!
4!
3. Click [Voice] !Click [Regional].
On [Distinctive Ring Pattern]
set [Ring1 Cadence] to [60
(1/2)]
On [Miscellaneous] set the
following:
[Set Local Date (mm/dd)]
[Set Local Time (HH/mm)]
[Time Zone]: Ex. [GMT +
09:00]
To manually set NTP Server:
1. Click [Admin Login] !click [Router].
2. Click [Wan Setup].
3. Go to [Optional Settings] !
in [Primary NTP
Server] type [ntp.jst.mfeed.ad.jp].
* Click [Submit All Changes] to save changes made.

!
5!
4. Click [Voice] !Click [Line 1].
VoIP Server
Unique ID
Password
Unique ID
VoIP Server
Set the following:
[NAT Settings]
NAT Keep Alive Enables: Select [Yes].
[Network Settings]
Network Jitter Level: Select [Very High].
Jitter Buffer Adjustment: Select [Disable].
[Proxy Registration]
Proxy: Enter [VoIP Server].
[Subscriber Information]
Display Name, User ID, Auth ID: Enter [Unique ID].
Password: Enter the password provided during registration. If you changed your
password, enter your new password.
User Auth ID: Select [Yes].

!
6!
[Dial Plan]
Dial Plan: Enter (<0000:>xx.<:@gw0>|xx.|*x.|**x.|***x.|*x.*x.|*x.*x.*x.|#x.|#x.*x.|#x.*x.*x.)
[Supplementary Service
Subscription]
Call Waiting Serv: Select [No].
Three Way Call Serv: Select
[No].
[Audio Configuration]
User Pref Codec Only: Select
[Yes].
DTMF Tx Method: Select
[AVT].
FAX Disabule ECAN: Select
[Yes].
FAX Enable T38: Select [Yes].
Silence Supp Enable: Select
[No].
Echo Canc Enable: Select
[No].
Echo Supp Enable: Select
[No].
FAX Passthru Codec: Select
[G711u].
FAX Passthru Method: Select
[ReINVITE].

!
7!
5. Click [Voice] !Click [PST Line].
[NAT Settings]
NAT Keep Alive Enables:
Select [No].
[Network Settings]
Network Jitter Level:
Select [Very High].
Jitter Buffer Adjustment:
Select [Disable].
[Audio Configuration]
Use Pref Codec Ony: Select
[Yes].
FAX Disabule ECAN: Select
[Yes].
Silence Supp Enable: Select
[No].
Echo Canc Enable: Select
[No].
Echo Supp Enable: Select
[No].
FAX Passthru Codec: Select
[G711u].
FAX Passthru Method:
Select [ReINVITE].
DTMF Tx Method: Select
[AVT].
[PSTN-To-VoIP Gateway Setup]
PSTN-To-VoIP Gateway Enable: Select [No].
* Click [Submit All Changes] to save changes made.

!
8!
Router Configuration
* This setting applies only to SPA3102.
1. Click [Admin Login] !Click [Router] !Click [Wan Setup].
[Internet Connection Settings]
[Static IP Settings]
[PPPoE Settings]
[Optional Settings]
Primary NTP Server: Enter [ntp.jst.mfeed.ad.jp].
[MAC Clone Settings]: Select [Yes].
* MAC Address is a 12-digit code assigned to a unique piece of hardware for identification.
[Remote Management]: Select [Yes].
* This depends on the assigned web server port.
* Click [Submit All Changes] to save changes made.

!
9!
Precautions & Safety Instructions
The following instructions help use Linksys SPA3102 properly and prevent
accidents. Failure to follow these instructions would void the product’s
warranty and accident may happen.
•Immediately unplug the device from the power supply if there is a strange
smell and smoke. Don’t use the device and immediately contact the dealer for
repair. Do not disassemble or modify. The device may malfunction, cause
electric shock and fire.
•Do not insert metal and keep the device dry. The device may malfunction,
cause electric shock and fire.
•Do not touch the device when lightning occurs. Doing so may cause an
electrical shock. Don’t place near a flammable material. This may cause fire
or explosion.
•Holding the phone on wet hands may cause electric shock. Don’t place the
device in an extreme hot or cold place. Sudden temperature change may
cause malfunction of the device.
•Do not place in a damp, dusty or direct sunlight. This may trigger an
explosion of the device. Place in an even and stable location.
•Do not place the phone and earpiece near an absorbent and magnet
material. This may cause malfunction.
Troubleshooting
Please check the troubleshooting procedure before requesting a repair. If the
problem doesn’t get resolved, please contact us. Agile Shop ([email protected])
Initialization Method
Clear all data initialization process. You must set all the required information to start
initializing your service again.
1. Note the (000B82000xxxx) MAC address located at the bottom of the unit.
2. Press the [MENU] button and select [Config]. Then, select [Factory Reset] and
confirm by selecting [OK].

!
10!
PROBLEM
CAUSE
SOLUTION
General Failure
Plug and unplug from the power source. (Do this a few times).
Wait at least one minute before you again plug the device to
the power source.
If the problem is not resolved after doing this, contact us at:
[e-mail]
Please provide your number and broadband products.
No ringer sound
Ethernet cable is
disconnected.
AC adapter is
disconnected.
Did you change
the volume
settings?
Did you change the settings
on the display?
Check the connection of the
Ethernet cable.
Check the connection of the
AC adapter.
Adjust the volume on the
volume button.
Revert the changed settings.
Disconnect the Ethernet cable
(Please reboot).
Call is interrupted
by noise
Are there any abnormalities in
the network environment?
Check your network
environment.
Reference: http://www.jmgtechnology.com.au/spa_3102_guide.pdf
http://faktortel.com.au/support/telephone_adapters_phones/linksys/spa3102_auto_setup.php
Please check our website for FAQ.
For more information on features
and settings, please check
http://www.agile.ne.jp/support /
Inquiries by telephone and email:
Send to: [e-mail]
Telephone number: 03-6365-1506
Weekdays: 10:00 - 19:00