Linksys AM300 User manual

Linksys AM300 Installation CD - USB
Page 1 of 15
What tools are used to complete the task?
This User Guide provides step-by-step instructions on how to
configure a Linksys AM300 modem using the installation CD.
Why is this task performed?
This user guide will assist you in configuring the Linksys –
AM300 modem using the installation CD.
Troubleshooting
If after completing this user guide you are unable to get online
a factory reset of the modem may be required. Please refer to
the Linksys AM300 user manual for instructions on how to
complete a factory reset.
What tools are used to complete the task?
Linksys AM300 Modem, Linksys AM300 User Manual, USB
cable and a PC.

Linksys AM300 Installation CD - USB
1
With the PC running, insert the
Installation CD into the appropriate
drive and in the Welcome screen
which appears, complete the following
step:
1
1 Click on .
Page 2 of 15

Linksys AM300 Installation CD - USB
1
2
3
2
1
In the End User License Agreement
screen, complete the following steps:
1
1 Read the Terms of the End User
License Agreement.
2
2 Click on .
Page 3 of 15

Linksys AM300 Installation CD - USB
1
3
2
4
5
6
2
1
In the Connect the ADSL Modem
screen, complete the following steps:
1
1 Ensure you plug the phone cable
from the wall into the back of the
modem.
2
2 Click on .
Page 4 of 15

Linksys AM300 Installation CD - USB
2
1
2
1
In the Power on the Modem screen,
complete the following steps:
1
1 Ensure you have plugged the
power adapter into the Modem’s
Power port. Plug the other end
into a powerpoint. Power on the
Modem.
2
2 Click on .
Page 5 of 15

Linksys AM300 Installation CD - USB
In the Select Your connection Type
screen, complete the following step:
1
1 Click on USB.
Note: Do not connect the USB
cablesto the modem and PC.
1
Page 6 of 15

Linksys AM300 Installation CD - USB
1
In the Connect the Modem to a PC
screen, complete the following steps:
1
1 Wait for the Preparing USB
Driver Files, screen to complete.
Page 7 of 15

Linksys AM300 Installation CD - USB
+
2
1
In the Connect the Modem to a PC
screen, complete the following steps:
1
1 Ensure you plug one end of the
USB cable into the Modem’s USB
port and plug the other end into
an available USB port on your
computer.
2
2 Click on .
Page 8 of 15

Linksys AM300 Installation CD - USB
1
2
In the Found New Hardware Wizard,
complete the following steps:
1
1Ensure the Install the software
automatically (Recommended)
radio button is selected.
2
2Click on .
Page 9 of 15

Linksys AM300 Installation CD - USB
1
In the Found New Hardware Wizard,
complete the following step:
1
1 If the Hardware Installation
screen appears click on
.
Note: If the Hardware installation
screen does not appear proceed
to the next page of this user
guide.
Page 10 of 15