Linksys EG0801SK - EtherFast Network Starter User manual

EtherFast®10/100/1000
8+1 Workgroup
Gigaswitch Starter Kit
n networking, speed is everything. With the EtherFast®
10/100/1000 8+1 Workgroup GigaSwitch Starter Kit
from Linksys,you can now move up to the new standard
for network speed—1000 Mbps! The Kit comes with all you
need to upgrade your network in minutes—one Instant
Gigabit Network Adapter, an EtherFast®10/100/1000 8+1
Workgroup GigaSwitch, and one Category 5E network cable.
Plug in the card, install the software driver, connect to the
switch, and go! The GigaSwitch Starter Kit allows your net-
worked PCs to share documents, files, hard drives, pro-
grams, CD-ROMs, multimedia, printers and more.
Connect your workstations to the GigaSwitch's 10/100 ports,
and speed up access time for all your users in just one move.
Connect to your server through the single Gigabit port for full-
duplex, dedicated bandwidth of up to 2000Mbps! With the
EtherFast®10/100/1000 8+1 Workgroup GigaSwitch, you can
connect your existing 10/100 Ethernet network to your
Gigabit server backbone without purchasing costly Gigabit
adapters for each workstation. In addition, the Gigaswitch
has easy, hassle-free setup with no configuration required.
Speed, convenience, and affordability make the Network
Starter Kit a great introduction to the world of Gigabit con-
nectivity.
EtherFast®10/100/1000 8+1
Workgroup GigaSwitch Starter Kit
(EG0801SK)
I
Take Your 10/100 Network to
the Next Level of Performance
Features
Features
Benefits
Benefits
AAddddBBllaazziinnggGGiiggaabbiitt
SSppeeeeddttooYYoouurrNNeettwwoorrkk
Instant Gigabit Series
• 8 Port 10/100 Mbps Auto-Detect Half/Full Duplex
Switch Ports and 1 Gbps Full Duplex Switch Port
• Internal Built-In 255 KB SRAM for Buffer Memory (Switch)
• Capable of Storing Up to 4096 MAC Addresses with
Address Learning
• Supports Store and Forward Architecture
• Non-BLocking Shared Memory Architecture
• Automatically Adjusts to Full or Half Duplex at
10/100/1000Mbps (Adapter)
• Wake-on-LAN and Plug-and-Play Compatible
• 33Mhz, 32-bit PCI v2.2
• Supports Congestion Flow Control
• Provides 3 LEDs per Port to Indicate the Packets
Traffic Pattern
• Signal Regeneration Ensures Data Transfer Integrity
• Free Technical Support—24 Hours a Day, 7 Days a
Week for NorthAmerica Only
• One-Year LimitedWarranty
• Each 10/100 Port Automatically Detects and
Negotiates Between 10Mbps and 100Mbps
Speeds
• Connects to 10Mbps, 100Mbps, and Gigabit
Ethernet Networks
• Integrates Your Existing 10/100 Network with
a Gigabit Server Backbone Connection
• Channels Full Duplex, Dedicated
Bandwidth to Each Port for Optimal
Performance
• Easy to Use—No Configuration Required
• Free Technical Support—24 Hours a Day,
7 Days a Week for North America Only
• One-Year Limited Warranty

Package Contents
EtherFast®10/100/1000 8+1 Workgroup
GigaSwitch Starter Kit
• One Instant Gigabit (32-Bit) NetworkAdapter
• One 10/100/1000 8+1Workgroup GigaSwitch
• One Category 5E Network Crossover Cable
(10 Ft.)
• One 3.5” Driver Disk
• One AC Power Adapter
• One Stacking/Wall Mounting Module
• One User Guide and Registration Card
Model Number: EG0801SK
Linksys
17401 Armstrong Ave.
Irvine, CA 92614 USA
Information [phone]
Technical Support [phone]
[phone]
Fax [phone]
World Wide Web http://www.linksys.com
Email [email protected]
[email protected]
China
Tech Support (10) 6432 1920
Sales (10) 6432 1923
Fax [phone]
Japan
Telephone [phone]
Fax [phone]
Philippines
Telephone [phone]
Fax [phone]
Singapore
Telephone [phone]
Fax [phone]
Thailand
Telephone [phone]
Fax [phone]
United Kingdom
Tech Support 0870 7393939
Sales 01245 352403
Fax [phone]
DS-EG0801SK-10207NC DG
The Instant Gigabit Adapter’s
Wake-on-Lan feature is optional. In
order to use the feature, the card
must be properly connected to a PCI
motherboard that supports WOL
event management. If your mother-
board does not support Wake-on-
Lan, the card will operate as a nor-
mal Network Adapter.
WOL
Wake-On-LAN Compatible
• Pentium 90 Mhz CPU or faster
• 16MB of RAM
• PCI Local Bus 2.1 Compliant
• WIndows 95 (or higher) Operating System
System Requirements
Specifications
Instant Gigabit Network Adapter
Model EG1032
Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3x,PCI 2.1, PCI 2.2,
ACPI
Protocol CSMA/CD
Ports: 1 Straight-Through 10BaseT/100BaseTX/
1000BaseT RJ-45 Port (Auto-Senses Speed
and Duplex)
Cabling Type: 10BaseT: UTP/STP Category 3 or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5e or better
Topology: Star
Speed: Full Duplex: 20Mbps,200Mbps or 2000Mbps
Half Duplex: 10Mbps,100Mbps or 1000Mbps
WOL Support: Remote Wake-Up
Power Management Event (PME)
Bus Type: 32-Bit PCI
LEDs: Link/Activity, 1000Mbps
10/100/1000 8+1 Workgroup GigaSwitch
Model Number EG0801W
Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Protocol CSMA/CD
Ports Eight 10/100 RJ-45 Ports, One Gbps Full-
Duplex RJ-45 Port
Cabling Type 10BaseT: UTP/STP Category 3 or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5E or better
Topology Star
Speed Per Port 10Mbps or 100Mbps (Half Duplex)
20Mbps or 200Mbps (Full Duplex)
1000Mbps or 2000Mbps (Gigabit Port)
LEDs Link/Act, Full/Half Duplex/Col, 10/100
Environmental
Instant Gigabit Network Adapter
Dimensions: 5” x 6.8” x .75” (127mm x 173mm x 19mm)
Unit Weight: 3.2 oz. (.09 Kg)
Power: 5W Maximum
Certifications: FCC Class B, CE Mark, Commercial UL and CSA Listed
Operating Temp.: 32ºF to 122ºF (0ºC to 50ºC)
Storage Temp.: -4ºF to 158ºF (-20ºC to 70ºC)
Operating Hum.: 10% to 85% Non-Condensing
Storage Hum.: 5% to 90% Non-Condensing
10/100/1000 8+1 Workgroup GigaSwitch
Dimensions: 7.31”x 6.06”x 1.88”(186mm x 154mm x 48mm)
Unit Weight: 13.6 oz. (.39Kg)
Power: 3.3V DC, 5A
Certifications: FCC Class B, CE Mark Commercial
Operating Temp.: 0ºC to 40ºC (32ºF to 104ºF)
Storage Temp.: -20ºC to 70ºC (-4ºF to 158ºF)
Operating Humidity: 10% to 85% Non-Condensing
Storage Humidity: 5% to 90% Non-Condensing