Lionel New Haven Command Ready-To-Run O Gauge Set User manual

New Haven Command
Ready-To-Run O Gauge Set
Owner’s Manual
CAUTION—ELECTRICTOY
NOT RECOMMENDED FOR CHILDREN UNDER EIGHT YEARS OF AGE. AS WITH ALL ELECTRIC
PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO REDUCE
THE RISK OF ELECTRIC SHOCK.
TRANSFORMER RATINGS—INPUT:120VAC; 60 HZ ONLY.
AC OUTPUT:18V; 10AMPS
LIONEL 73-1905-250
6/01

Table of contents
Congratulations!
2
You’re now the proud owner of the New Haven Command Ready-To-Run O
Gauge Train Set. Everything you need to get
started is included. You’re already off to a
great start by reading this instruction man-
ual. It has important information on train
setup and operation. This booklet also cov-
ers proper maintenance procedures to help
your Lionel trains live long, healthy lives.
If you have any questions after reading
this booklet, contact your nearest Lionel
Authorized Service Center using the enclosed
list or call Lionel Service at 810-949-4100.
And have fun!
Track layout
Getting started 3
Joining the track sections 4
Suggested track layouts 5
Train operations
Coupling 6
Notes 7
Lionel Service/Limited Warranty 8
IMPORTANT NOTE
Each individual engine, freight car, and Command equipment comes with its own
detailed instructions. Please refer to the individual instruction sheets for specific product
information and for setting up your Command layout.
PowerHouse Notice
Although the PowerHouse Lockon sup-
plied with your set will limit your out-
put to 135 watts, we have supplied you
with a 180 Watt PowerHouse. We believe
you should have the future option of
upgrading your system without the
need to purchase additional power.

Track Layout
3
Getting started
Before you do anything else, we recom- mend that you check the contents of
your set box to that ensure all of the parts of
your set have been included and the quanti-
ties (when applicable) are correct.
The parts list below will tell you what’s
included and the correct quantities. If you
find any discrepancies, contact your Lionel
dealer for more information or call 1-800-
4-LIONEL for a service center near you.
Now comes the fun part—deciding what
kind of layout you want. The only rule—let your imagination be your guide.
• RS-11 Diesel Locomotive 1
• Flatcar with trailer 1
• 4-Bay Covered Hopper 1
• 8000 Gallon Tank Car 1
• Square Window Caboose with Light 1
• CAB-1 Remote Control 1
• Command Base 1
• Command Lockon 1
• 180 Watt PowerHouse 1
• Lockon 1
• Straight track 8
• Curved track 8
• Service Center list 1
• Warranty Card 1

Track Layout
4
Joining the track sections
Join the track sections together by inserting the pins of one track section
into the rail openings of another. For good
electrical contact, pins must be carefully
inserted and track joints tightly fitted.
If the track is difficult to connect, try this
installation tip. You can “break in” O Gauge
track sections by inserting and withdrawing
a track pin into one rail at a time before
joining the entire track section.
If the openings become too large (causing
the track to fit loosely), pinch the rail
together around a track pin with a pair of
pliers. If any pins fall out of the track and
are missing, replace them with extras, avail-
able from your Lionel dealer.
Maintenance tip: The rails should be kept
clean, dry, and free from oil and grease.
Clean rust and dirt spots with a track eraser.
Wipe the track using a cloth dampened with
track cleaner from the Lionel maintenance
kit (no. 6-62927), available from your near-
est Lionel Authorized Service Center.

Track Layout
5
Suggested track layouts
Here are some examples of layouts you can build with 8 straight and 8 curved sections of track.
Remember—the more track you own, the more variations you can create in your train layout.
And that means more action and more fun!

Train operations
6
Coupling
After you have assembled the track, place the locomotive and rolling stock on the
track. Before coupling the cars, make sure
the wheels are properly set on the rails.
When coupling your cars, at least one of
the mating couplers must be open as shown
below at the left. Now, simply push the cars
toward each other until they lock together.
You’re ready to pull out of the station. All
aboard!
Keep in mind that it’s easier to couple cars on a straight stretch of track.
Push down the lock
release to open the
coupler.

Notes
7

Limited Warranty/Lionel Service
This Lionel product, including all
mechanical and electrical components,
moving parts, motors and structural
components, except for light bulbs, is warranted to
the original consumer-purchaser, for one year
against original defects in materials or
workmanship when purchased through an
authorized Lionel dealer.
This warranty does NOT cover normal wear
and tear, light bulbs, defects appearing in the
course of commercial use, or damage resulting
from abuse or misuse of the product by the
purchaser. Transfer of this product by the original
consumer-purchaser to another person voids this
warranty. Modification of this product voids this
warranty.
Any warranted product which is defective in
original materials or workmanship and is delivered
by the original consumer-purchaser to Lionel
L.L.C. or an authorized Lionel L.L.C. Service
Station, together with proof of original purchase
will, at the option of Lionel L.L.C., be repaired or
replaced, without charge for parts or labor. In the
event the defective product cannot be repaired, and
a replacement is not available, a refund of the
original purchase price will be granted. Any
products on which warranty service is sought must
be sent freight or postage prepaid, as
transportation and shipping charges are not
covered by the warranty.
In no event shall Lionel L.L.C. be
liable for incidental or
consequential damages.
Some states do not allow the exclusion or
limitation of incidental or consequential damages,
so the above exclusion may not apply to you.
This limited warranty gives you specific legal
rights, and you may have other rights which vary
from state to state.
Instructions for Obtaining Service
If service for this Lionel L.L.C. product is
required, bring the item, along with your dated
sales receipt and completed warranty information
to the nearest Authorized Lionel Service Station.
Your nearest Lionel Service Station can be found
by calling 1-800-4-Lionel, or by accessing our
Website at www.lionel.com.
If you prefer to send your product back to
Lionel L.L.C. for factory repair, you must first call
810-949-4100 or FAX [phone], or write to
Customer Service, P.O. Box 748, New Baltimore,
MI 48047-0748, stating what the item is, when it
was purchased and what seems to be the problem.
You will be sent a return authorization letter and
label to ensure your merchandise will be properly
handled upon receipt.
Once you have received your return
authorization and label, make sure that the item
is packed to prevent damage during shipping and
handling. We suggest that you use the product’s
original packaging. This shipment must be
prepaid and we recommend that it be insured.
Please make sure you have followed all of the
above instructions carefully before returning any
merchandise for service.
Warranty Information
Please complete the information below and
keep it, along with your dated sales receipt. You
must present this and your dated sales receipt
when requesting warranty service.
Name ____________________________
Address____________________________
Place of Purchase ____________________
Date of Purchase ____________________
Product Number______________________
Product Description____________________
_________________________________
©2001 LIONEL LLC, CHESTERFIELD, MI 48051-1956
UNITED STATES OF AMERICA
PRINTED IN CHINA