LitterMaid Kitty Kabana LME9000MW User manual

Getting Started
Make sure you have all of the parts listed below
Transparent tubes (2)
Metallic rod
Curved tubes (already preassembled in kabana)
Preassembled Kabana
1.
2.
3.
4.
Models
LMT250
LME9000MW
LME9250
1. Insert the metallic rod through the
looped fabric located on top of the
preassembled kabana (A).
Kitty Kabana
LITTER BOX COVER
™
1
2
3
4
AB
C
2. Position the ends of the metallic rod over the curved tubes that are already
preassembled inside the kabana (B).
3. Press the ends of the metallic rod into the curved tubes, (where the kabana's fabric
has an opening), until it snaps into place (C).
Note: The two remaining transparent tubes are installed at the end.
D
How to install the LitterMaid Kitty Kabana™ onto
your LitterMaid® Litter Box
1. Remove the 4 plugs located on the corners of the litter box's top housing (D).
To Assemble

2008/6-13-62E LMT250/ LME9000MW/ LME9250
2. Insert the kabana's 4 curved tube ends into the plug holes on the litter box's top
housing, one at a time (E).
3. Lift the kabana's side flap to reveal the looped fabric on the inside of the kabana (F).
4. Insert the transparent tube through the looped fabric of the kabana (G).
5. Insert the transparent tube into the latch of the curved tube end on both ends of the
kabana (H).
6. Repeat steps 3 - 5 to assemble the other side of the kabana.
7. Your LitterMaid Kitty Kabana™ is now fully assembled.
H
G
F
E
Care and Cleaning
1. From time to time, wipe the outer surface of the kabana with a damp soft cloth.
2. For a thorough cleaning, remove the kabana from the litter box.
3. Disassemble the kabana for cleaning the same way it was assembled.
4. Kabana may be hosed down or washed with warm, soapy water.
5. Kabana may also be washed in the sink or tub.
Important: Do not place the LitterMaid Kitty Kabana™ in the washing machine or the dryer.
6. Once the Kabana is completely dry, reassemble it and place it back on the litter box.
Important: Allow the kabana to dry thoroughly before reassembling it.
Storing
1. Disassemble the LitterMaid Kitty Kabana™ and store in its box or in a clean, dry place.
Copyright © 2008 Applica Consumer Products, Inc.
Made in People’s Republic of China
Printed in People’s Republic of China