ENG
4
•
Two thickened sound-conducting tubes of 56 or 72 cm long (indicated in box) – 1 set
.
• Binaural metal tubes with spring and ear tips – 1 set.
Additional accessories entering the set:
• Plastic big bell (diameter 33 mm) – 1 pc.
• Plastic small bell (diameter 26 mm) – 1 pc.
• Plastic neonatal bell (diameter 19 mm) – 1 pc.
• Big membrane (diameter 40 mm) – 1 pc.
• Small diaphragm (working diameter 25 mm) – 1 pc.
• Small membrane (diameter 27 mm) – 1 pc.
• Plastic ear tips – 2 sets.
• Plastic bag for additional accessories – 1 pc.
Size with package, mm: 300 х 130 х 40
Weight (with package), g: 398
Change of power cell:
Power cell, type LR 626/377, 1.5 V, is used in clock of stethoscope LD SteTime
.
Change of power cell is necessary on the average once a year.
Sequence of power cell change:
Unscrew attachment piece with clock from stethoscope head.1.
Unscrew with the help of coin rear part of attachment piece (Fig. 1).2.
Remove clock (Fig. 2).3.
Using thin screwdriver, pry off and remove clock lid (Fig. 3).4.
Change power cell (type LR 626/377, 1.5 V).5.
Make assembly in reverse order.6.
Clock power cell is recommended to change in specialized clock workshops.
Guarantee for power cell is not applied.
CARE, STORAGE, REPAIR AND DISPOSAL
1. Keep this
Stethoscope
from exposure to higher humidity, direct sunlight, shocks.
2. Do not keep and use this
Stethoscope
near heating installations and open fire.
3.
Keep the
Stethoscope
clean and protect it from dust
.
4.
Do not allow
contact with corrosive solutions.
5.
Repair the Stethoscope only in authorized organizations, adresses on
Warranty Card.
6.
Change clock power cells (for LD SteTime) in specialized clock workshops.
