Little Tikes 658365 User manual

1
SKU: 658365
ADULT ASSEMBLY REQUIRED
AGES 12-36 MONTHS
8
ADULT BATTERY INSTALLATION REQUIRED
12
Front Base Assembly
Connect both arches (14 a, b) to form a complete arch. Then, connect the
bottom tips of the arch to the front base (13). Be sure to use gentle force when
snapping parts into place.
Position front and back base as pictured. Fully extend tunnel to prepare for
connection to both bases. The tunnel will be used to connect both bases.
Face the end of the tunnel (15) with five hook and loop fasteners towards the
front base. Tie the two straps located near the sew in label to the front base.
The end of the tunnel with four hook and loop fasteners should face the back
base. Slide fasteners through their appropriate slots on each base located as
pictured below.
Thank you for choosing the Little Tikes® 2-in-1 Activity Tunnel.
We strive to provide a durable, easy-to-assemble toy that is made to last,
giving your child years of imaginative, engaging fun!
13
14
TM
2
-
i
n
-
1
A
c
t
i
v
i
t
y
T
u
n
n
e
l

27
CONSUMER SERVICE
LIMITED WARRANTY
IMPORTANT INFORMATION YOU SHOULD KNOW!
• Read through all the instructions first.
• Clear a flat surface to lay out all the materials so that everything is close at hand.
• Illustrations are for reference only. Styles may vary from actual contents.
• Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
• Make sure you have all contents before assembling. If anything is missing or if you have
questions, we’re here to help. Give our consumer service team a call at 1-800-321-0183.
© The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans,
and packaging appearance are the property of Little Tikes.
The LittleTikes Company makes fun, high quality toys.We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt
is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This
warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other
cause not arising from defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow
Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specic legal rights, and you may also have other rights, which vary from country/state to country/state. Some
countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Printed in China • 0521-2-E/INT
MGA Entertainment (Netherlands) B.V.
Baronie 68-70
2404 XG Alphen a/d Rijn
The Netherlands
Tel: [phone]
Little Tikes Consumer Service
www.littletikes.com
2180 Barlow Road
Hudson, Ohio 44236 U.S.A.
Email: [email protected]
1-800-321-0183 Monday-Friday
MGA Entertainment UK Ltd.
www.littletikes.co.uk
50 PresleyWay, Crownhill, Milton
Keynes, MK8 0ES, Bucks, UK
[e-mail]
Tel: [phone]
Imported by MGA Entertainment
Australia Pty Ltd
www.littletikes.com.au
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
• Keep away from fire. Do not place near fires or other sources of head such as radiators, open or
electric fires.
• KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TUNNEL FABRIC.
This tunnel meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous
contact with any flame source. The application of any foreign substance to the tunnel fabric may
render the flame-resistant properties ineffective.
• ADULT ASSEMBLY REQUIRED.
• Prior to assembly, keep away from children until assembled.
• Please keep this manual as it contains important information.
• This product is intended for indoor use only.
• This product is intended for use by children ages 12-36 months.
• Place on flat, level surfaces free of objects that could cause the tunnel to tip over.
• Place out of the way of household traffic.
• Never use near staircase, steps, pools, hot surfaces, or areas that may be hazardous to a child.
• Do not use if damaged or broken.
WARNING!
Let’s be careful!
Attach spirals by placing the locks from the top and bottom ends into the
right tower.
9
10 Connect the dome dish (9) to the top of the right tower, then attach the dome
(10) to the top of the dish. Note: When both pieces are connected properly
they will create a circular opening.
11 Attach the funnel (6) to the top of left tower, while lining up to the guides
located on the top end of the tower and bottom of the funnel itself.
I
I
F
F

36
Battery Safety Information. This is serious!
• Keep these instructions for future reference.
• Requires 3 “AAA” (LR03) alkaline batteries (not included). (Rechargeable batteries may be substituted.)
• The voltage of a fully-charged, rechargeable battery is often lower than that of a fresh alkaline battery.
Therefore, it is recommended that alkaline batteries be used instead of rechargeable batteries for
best performance and longer play time.
• Install batteries with the correct polarity (+ and -).
• To avoid battery leakage:
1. Follow the toy and battery manufacturer’s installation instructions.
2. Do not mix old and new batteries.
3. Do not mix standard (carbon-zinc), alkaline or rechargeable batteries. Do not mix different brands of
batteries. Only batteries of the same or equivalent type as recommended are to be used.
4. When toy is not used for an extended period of time, remove batteries to prevent possible leakage
and damage to the unit.
5. Remove dead or exhausted batteries from product.
6. Dispose of dead batteries properly; do not bury. Do not dispose of batteries in fire as they may leak
or explode.
• Make sure cover is properly installed on unit at all times.
• Do not attempt to recharge non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before recharging.
• Charging of rechargeable batteries should be done by an adult.
• The supply terminals are not to be short circuited.
NOTE: If the unit stops working or doesn’t work as it should, remove the batteries for a few minutes
and then re-insert them. If there is still a problem, install new batteries
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household waste.
Please use designated collection points or recycling facilities when disposing of the item. Do not treat old
batteries as household waste. Take them to a designated recycling facility.
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Modications not authorized by the manufacturer may void users authority to operate this
device.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)
This device may not cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
5Connect the second tray 2 (5) to the middle tower piece. Ensuring they are
properly aligned and securely connected.
6Attach right tower bottom (7) to the right side of the back base. Be sure to line
up the opening closest to the bottom of the ramp to eliminate any obstruction
or interference when play time begins.
7Take the bridge (8) and connect it to the back base. Make sure to align all
pieces properly using the rectangular guides located on the connecting ends
of either pieces/parts. Music is activated by ball drops and by pressing the
buttons on the bridge for music.
8Connect both spiral pieces (12 a, b) to one another. Both pieces will snap into
one another. Note: Once both pieces are connected each end will have a
connector that will connect to the top and bottom of the right tower.
D
G
E
E
H
H
G
D

45
Before you begin, install the batteries!
Before beginning, an adult must install fresh alkaline batteries. Here’s how:
1. Using a Phillips screwdriver (not included), remove the screws and battery compartment cover
located under the bridge (8).
2. Install three (3) fresh 1.5V AAA (LR03) alkaline batteries (not included) making sure the (+) and
(-) ends face the proper direction as indicated inside the battery compartment.
3. Replace the compartment cover and tighten the screws.
1
2
To begin assembly, lay back base (1) on flat surface as pictured. Connect the
left tower bottom (2) to the left side of the back base.
Back Base Assembly
Connect ramp (11) to the right side of the back base.
Note: The bottom of the ramp should be pushed down firmly to ensure it is
fully connected.
3Take tray 1 (3) and connect it to the left tower bottom.
Note: Locate and match up rectangular cut out on both pieces to ensure
proper alignment.
4Attach the middle tower (4) to the tray in a stacking manner. Ensuring they
are properly aligned and firmly connected.
3x AAA Batteries
CONTENTS
1. Back Base
2. Left Tower Bottom
3. Tray 1
4. Middle Tower
5. Tray 2
6. Funnel
7. Right Tower Bottom
8. Bridge (Battery Compartment)
9. Dome Dish
10. Dome
11. Ramp
12. Spiral Ramps (2)
13. Front Base
14. Arch (2)
15. Tunnel
16. Plastic Balls (5)
Illustrations are for reference only. Styles may vary from actual contents.
Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
1.
2.
4.
11.
7.
10.
9.
a. b.
12.
6.
13.
14. 15.
8.
16. x5
3. 5.
NOTE: Lettering printed on actual parts are designed to assit with aligning partts to ensure stable and proper placement.
O
a. b.
1.5V AAA/LR03
1.5V AAA/LR03
1.5V AAA/LR03
A
A
B
C
C
B