Little Tikes Girl Scout Cookie Booth User manual

ASSEMBLY INSTRUCTIONS
Girl Scout Cookie Booth
XIM664090 - 5/23
1
Adult assembly required. Approx. assembly time: 25 min.
3+
#664090

2
WARNINGS!
• Adult Assembly Required
• Keep these instructions as it contains important information.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain
sharp edges and sharp points. Keep away from children until assembled.
• This product is intended for indoor/outdoor family use only.
• This product is intended for use by children ages 3 years and up.
• Do not allow children to sit, stand, play or climb on the top surface. Failure to do so may cause the product
to become unstable.
• Protect your eyes. Always wear safety glasses when using power tools.
• Thoroughly wash accessories before contact with food or beverage.
• To better clean the product use a cloth with mild soap and water or skin, hand or face wipes.
WARNINGS!
CHOKING HAZARD - Small parts. Not suitable for children under 3 years.
• Markers will stain fabric and other surfaces.
• To better clean the marker, use a damp cloth or for better results a dry erase cleaner.
Thank you for choosing the Little Tikes©Girl Scout Cookie Booth.
We strive to provide a durable, easy-to-assemble toy that’s made to last,
giving your child years of imaginative, engaging fun!
• Read through all the instructions rst.
• Clear a at surface to lay out all the materials so everything is close at hand.
• You will need a Phillips head screwdriver (not included) to assemble the Girl Scout Cookie Booth.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
• Be sure to locate your decals and set aside. Some decals are easier to apply when the part is
laying at, so you may want to apply the decals before assembly.
• The parts are listed below - each part is identied with a letter in RED for easy reference.
• Illustrations are for reference only. Styles may vary from actual contents.
• If you have any questions, we’re here to help. Give our customer service team a call at 1-800- 321-0183.
Really important information you should know!
Let’s be careful!

3
A Few Things Before You Start!
BEFORE you begin assembly, make sure
you have all the parts listed below.
Some packages of hardware may have extras pieces.
Tool required (not included)
(2)
1/2” (1,27 cm)
Actual size
!
Questions? We’re here to help.
Little Tikes customer service team at 1-800- 321-0183.
!
(1) Decal sheet
(decals are permanent
once placed on product)
Back wall -- left side (1)
A
Back wall -- right side (1)
B
Side tables (2)
D
Side table supports (2)
E
Front panels (2)
C
Side walls (2)
H
Countertop (1)
F
Top frame (1)
I
Bottom platform (1)
G
Sign (1)
J

4
Accessories
Markers (2)
CONFORMS TO ASTM D-4236
Card reader (1)
Coins (2) Dollars (2) Credit card (1)
Cookies (5)
Cookie boxes (5)
Tray (1)
© 2023 Girl Scouts of the USA. The GIRL SCOUTS® name, mark, and all associated trademarks and logotypes, including GIRL SCOUT COOKIES®,THIN MINTS®, Trefoils®, GIRL SCOUT COOKIE SALE®, GIRL SCOUT COOKIE PROGRAM®, and
the Trefoil Design, are owned by Girl Scouts of the USA. MGA Entertainment is an ocial GSUSA licensed vendor. © The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the
U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes except the Girl Scout IP. Please keep this address and packaging for reference since it
contains important information. Contents, including specications and colors, may vary from photos depicted on package. Instructions included. Please remove all packaging including tags, ties & tacking stitches before giving
this product to a child.
LIMITED WARRANTY
The LittleTikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is required
for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product.This warranty is valid only if the
product has been assembled and maintained per the instructions.This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material
and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service,The LittleTikes Company, 2180 Barlow Road, Hudson
OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service.This warranty gives you specic legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
United States:
www.littletikes.com
1-800-321-0183 Monday - Friday
The Little Tikes Company
2180 Barlow Road, Hudson, OH 44236
Printed in U.S.A. D.R.©2023 The Little Tikes Company
United Kingdom:
www.littletikes.co.uk
MGA Consumer Services
P.O. Box 2040 Hockley, Essex, SS5 4BF
Phone: [phone]
E-mail: [e-mail]
Australia
www.littletikes.com.au
MGA Entertainment Australia PTY LTD.
Suite 2.02, 32 Delhi Road, Macquarie Park NSW 2113, AU.
Phone: [phone]
Email: [email protected]om
CUSTOMER SERVICE:
Ciascun componente è
contrassegnato dal simbolo
del materiale. Raccolta
dierenziata. Verica le
disposizioni del tuo Comune.
Box assembly
12

5
1
1/2"(1,27 cm)
x2
1
A
B
Simple to start
First, place the Left side - back wall
(part B) onto the Right side - back
wall (part A).
Second, secure using (2) 1/2” (1,27 cm)
screws.
(view from the back)
2

6
Snap (1) side (part H) onto the opposite side of assembled back walls.
H
H
2
Get Snappin’
Snap (1) side (part H) onto the assembled back walls.
Snap!
Snap!
Make sure ALL (4) tabs line up before snapping!
If they don’t line up - ip the side around.
WAIT!

7
G
Snap!
3
Flip it
Turn the unit upside down and snap on the bottom platform (part G).
Align indents
4a
Fits together and locks....
Interlock (2) front
panels (part C) together.
1
C
Tabs should t evenly
between each other.
Slide right panel upward while sliding the
left panel downward - to lock panels in place.
2
NOTE: the top of the front panels
should be even once locked in place.

8
F
Snap!
5
The countertop is a SNAP!
Make sure ALL the
tabs line up
and SNAP!
If they don’t, the
countertop may
appear wobbly.
WAIT!
4b
Front panel slides right in!
Lay unit on its side. Insert the assembled front
panels (part C) into the unit. Tabs should be fully
inserted into the wall.
Lift up the side wall in order to insert
the CORNER TAB FIRST.
Once corner tab is inserted, push the
remaining tabs into place as you move
the wall back into position.
2a
1
2b
Align the back of countertop (part F)
to the notches on the base.
Press down on the countertop
to snap in place.

9
6
A support on each side...
1. Pop in long post of the side table support
(part E) into the side.
2. Slide down the beveled side of the side
table support until it clicks into place.
Repeat other side.
2
1
E
(There is a long post and
a short post. Insert the
long post in rst, then
the short post.)
Long
post
Short
post
7
Swing it in
Pop-in the side table (part D) into countertop. Repeat other side.
2
1
D
D
x2
x2

10
1
2
Snap!
8
Still more to swing
Swing table support upward and snap it into the underneath of each side table.
12345
1. Align notch
2. Apply decal, fold over
the canopy edge.
9
Green, white, green, white, green...
Apply decals 1 through 5 to the canopy on the top frame (part I). NOTE: to start align the notch, press
decal smoothing from the center outward. Fold and press decal over canopy edge to nish.
1
2
3
4
5