Little Tikes GRAND COZY COUPE User manual

XIM630750-R6 - 7/22
1
Adult assembly required. Approx. assembly time: 50 min.
11
/2-5
years
ASSEMBLY INSTRUCTIONS
Cozy Coupe®
#173059M
#173059MX1
#484513
#485367
#486180
#612060M
#612060MX1
#614798P
#615795M
#621390M
#627286M
#630750M8X1
#630750MX1
#630750MP
#641954M
#641954MX1
#641961M
#641961MX1
#644948M

WARNINGS!
• Adult Assembly Required
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may
contain sharp edges and sharp points. Keep away from children until assembled.
• Ride-on toys should not be used near swimming pools, on or near steps, hills, roadways, or inclines.
• Shoes must be worn at all times.
• Only one rider at a time.
• Maximum weight limit: 50 lbs. (23 Kg)
• This product is intended for use by children ages over 1 1/2 - 5 years.
• Adult supervision required. Do not leave children unattended.
• This product is intended for outdoor domestic family use only.
• Protect your eyes. Always wear safety glasses when using a hammer.
• When temperatures fall below 0°F/-18°C, outdoor use of this product is not recommended. In extreme
cold, plastic materials lose resilience and may become brittle and crack upon impact. Store product in a
warmer, protected place.
DISPOSAL
Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not
limited to, small parts and sharp edges exist at the time equipment is discarded.
Thank you for choosing the Little Tikes©Cozy Coupe®. We strive to
provide a durable, easy-to-assemble toy thats made to last, giving your
child years of imaginative, engaging fun!
• Read through all the instructions rst.
• Clear a at surface to lay out all the materials so everything is close at hand.
• You will need a Phillips head screwdriver (power driver, recommended, not included) hammer and safety
glasses (not included) to assemble the Cozy Coupe®.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
• Be sure to locate your decals and set aside. Decals are easier to apply when the part is laying at, so you
may want to apply the decals before assembly.
• The parts are listed below - each part is identied with a letter in RED for easy reference.
• Illustrations are for reference only. Styles may vary from actual contents.
• If you have any questions, we’re here to help. Give our customer service team a call at 1-800- 321-0183.
Really important information you should know!
2

Tools required (not included) Included in hardware pack (1). Discard after use.
Tool color may vary.
Top hat tool
Hardware Guide
Shown actual size
Top hat (4)
Washer (6)
Bushing (4)
Axle Cap (2)
BB
CC
DD
Top hat tool
AA
(4) 1/2" (1,27cm)
Remove and set aside. You
will need for assembly.
A Few Things Before You Start!
BEFORE you begin assembly, make sure
you have all the parts listed below.
Some packages of hardware may have extras pieces.
!
Questions? We’re here to help.
Little Tikes customer service team at 1-800- 321-0183.
!
(2) large fastener
3
(6) 1" (2,54 cm)

Body (1)
Door (1) Door latch (1)
Roof (1)
Roof Pillars - FRONT
Roof pillars -
front right (1)
A
BC
D
Eye base (1)
G1
Eye front (1)
G2
Eyes (2)
G3
Roof Pillars - REAR
Roof pillars -
front left (1)
E2
Roof pillars -
rear right (1)
Ignition Base (1)
F1
M1
Roof pillars -
rear left (1)
F2
Rear axle (1)
I
Wheels (4)
K
Center caps (4)
J
Hubcaps (4)
M
O1
Key (1)
O2
Tail Lights (2)
N
4
Gas cap (1)
H
E1

Front Wheel
Axles
Right
R
Left
L
L R
(1) Decal sheet
is located in the
hardware pack.
Steering O ring (1)
P
Steering Wheel (1)
Q
Floorboard buttons (2)
V
Steering clip (1)
T
Floorboard (1)
U
Horn bellows (1)
S1
Horn button (1)
S2
Horn collar (1)
S3
5
LIMITED WARRANTY
The LittleTikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is required
for proof of purchase). At the sole election of The LittleTikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product.This warranty is valid only if the
product has been assembled and maintained per the instructions.This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material
and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service,The Little Tikes Company, 2180 Barlow Road, Hudson
OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service.This warranty gives you specic legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
©The LittleTikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of LittleTikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the
property of Little Tikes. Please keep this address and packaging for reference since it contains important information. Contents, including specications and colors, may vary from photos depicted on package. Instructions included.
Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
United States:
www.littletikes.com
1-800-321-0183 Monday - Friday
The Little Tikes Company
2180 Barlow Road, Hudson, OH 44236
Printed in India. D.R.©2021 The Little Tikes Company
United Kingdom:
www.littletikes.co.uk
MGA Consumer Services
P.O. Box 2040 Hockley, Essex, SS5 4BF
Phone: [phone]
E-mail: [e-mail]
Australia
www.littletikes.com.au
Phone: [phone]
Email: [email protected]om
CUSTOMER SERVICE:
MINIMUM SIZE allowed is .2” high
Updated 12.2.11 per Paul Madan (new spacing)

Insert (2) tail lights (part N).
Push tail lights (part N)
into the Coupe body.
x2
N
1
Ready...let’s get started...with the tail lights!
6
Cap it!
2
Insert gas cap (part H).
H

Snap on Eyes (part G3).
Snap on Eye front (part G2).
3
Have to see where I’m going!
Secure Eye base (part G1) using (4) 1”
(2,54cm) screws.
Secure using (2) 1" (2,54cm) screws.
12
4
3
Tool required (not included)
(4) 1" (2,54 cm)
(2) 1" (2,54 cm)
7

Q
Snap!
Insert horn button (part S2)
and bellows (part S1) into
horn collar (part S3).
4
Let’s get the horn working
S2. S1
S3.
Snap horn into center of
steering wheel (part Q).
Before installing
steering wheel,
apply decals 1 & 2
to dashboard.
8
12

Steering wheel...in a Click!
Steering clip should snap into MIDDLE
hole on each side of the steering column.
Click
Make sure the steering clip
snaps past the O ring.
Squeeze steering clip (part T)
into steering wheel (part Q).
T
12
4
Insert steering wheel through
hole in dashboard AND through
the steering O ring (part P).
3
P
5
If your steering wheel is loose or
not staying in place; check to be sure
the steering clip has completely snapped
past the O-ring.
9
Q

6
B
A
Next, insert door (part B)
into body (part A).
C
TO PERMANENTLY LOCK THE DOOR
Add (1) additional ½”(1,27cm) screw
DOOR LOCKS
AND UNLOCKS
First, install door latch (part C)
into door (part B) Attach using
(1) 1/2” (1,27cm) screw.
Choose your lock!
B
10
1/2" (1,27cm)
Tool required (not included)

7
Roof and pillars match up!
BEFORE YOU START:
match roof pillars
marked “L & R” to the
correct side of roof
also marked “L & R”.
RL
D
R
L
Roof Pillars - FRONT Roof Pillars - REAR
11
7a
Insert the front RIGHT roof pillar.
Use one hand to rock the pillar
back and forth, while pushing
down with the other hand.
FRONT pillars...Lock the door in place!
Insert the front LEFT roof pillar. Use one
hand to rock the pillar back and forth,
while pushing down with the other
hand.
E2
E1
Make sure the
front RIGHT
roof pillar sits
over the knob
on the Coupe
door.
R
L
E1 E2
R L
F1 F2

12
REAR pillars... insert, pull back, turn!
7b
Turn the roof pillar around. The Little
Tikes logo should be facing outward.
TURN
F2
Repeat steps for the
roof pillar - rear LEFT
(part F2).
4
Pull the REAR roof pillar, toward you to fully
insert the pillar into the roof.
PULL
2
3
PUSH DOWN
Hook the ROUNDED END of the REAR roof pillar
(part F1) into the roof (part D) and push down.
F1
1D
BEFORE YOU START:
match roof pillars
marked“L & R” to the
correct side of roof
also marked“L & R”.

13
Rock the roof forward
and the FRONT pillars
(parts E1 & E2) will
SNAP into place.
2b 7c
Lets put it all together!
2
1
DO NOT insert the
rear pillars yet!
Push rear pillars into place. Be sure
pillars are ush with body.
Hook the ROUNDED END of
FRONT roof pillars (parts E1
& E2) into roof (part D).
3

14
2b 7d
Rear pillars- get attached
Person 1: hold down roof assembly.
Person 2: install (2) fasteners (1 each side)
(2) large fastener
Line up holes in body with holes in
rear roof supports to install fasteners
REAR wheels...give it a good hit!
8
Do not hammer on
surfaces or items
you don’t want to
break, mark or dent.
Place (1) top hat (part AA)
into top hat tool.
Top hat tool
AA
top hat
Insert the rear axle (part I)
into the top hat.
Hammer the axle into the top hat.
Rear axle
Really give it
a good hit!
I

15
Slide assembled axle through rear axle guides.
Slide onto rear axle (1) hubcap (M),
(1) wheel (K), and (1) washer (BB).
M
K
hubcap
wheel
BB
washer
REAR wheels...get in the groove.
Slide (1) washer (BB)
12
3
8a
Slide wheel (K), then
hubcap (M) onto axle.
hubcap
M
wheel
K
washer
BB

16
AA Top hat
Top hat tool
Flip the coupe on its side.
Place a (1) top hat (AA) and the top hat tool
over the OPEN end of the axle.
Hammer the top hat onto axle.
REAR wheels...last step.
Axle cap
tool
Use the tall axle cap tool to
SUPPORT the bottom of axle.
8b
Do not hammer on
surfaces or items
you don’t want to
break, mark or dent.
FRONT wheels...check your axles
9
Right
R
Left
L
LR
Slide onto LEFT front axle (L)
(1) washer (BB), (1) wheel (K) and (1) hubcap (M).
BB washer
L
L

FRONT wheels...cont.
17
Place the top hat,
then the top hat tool
onto open end of axle.
Hammer top hat onto
the axle.
REPEAT these steps for
RIGHT front axle
First, slide washer (BB), then bushing (CC)onto
assembled right axle. REPEAT on left side.
Then, attach FRONT wheels and axles.
FRONT wheels...rolling along!
CC
bushing
BB
washer
RL
Insert axle“R”
(for right) into body.
Insert axle“L”
(for left) into body.
9a
1
2
Top hat tool
AA
top hat
9

FRONT wheels...cont.
18
Insert bushing (CC)
onto each axle and
push in place
CC
bushing
3
9a
IMPORTANT! Check axle positions - roll the
Cozy Coupe forward - HUBCAPS SHOULD
FACING OUTWARD.
STOP
CORRECT
WRONG
WRONG

19
9b
Axle caps and snaps!
Insert axle cap (DD) onto
the top of each axle and
hammer into place.
DD
axle cap
Tall axle
cap tool
DD
axle cap
Tall axle
cap tool
DD
axle cap
Align slots and snap on
(4) center caps (part J).
2
1
10
Key & Ignition
Hammer ignition base (part O1 )
into Coupe body.
2
Insert Ignition Base (part O1)
LEFT roof pillar (part E2).
O1
Insert Key (part O2) into Ignition
base.
3
O2
1

Vx2
20
For parent controlled push rides, install the oorboard.
STOP U
12
Floorboard needs buttons!
Insert (2) oorboard buttons (part V).
Line up openings in oorboard (part V)
to oorboard buttons.
Once buttons are inserted into
oorboard, push downto secure in place.
LAST STEP...let’s finish with the decals!
Decals must be applied to a clean, dry surface. Wipe clean with a dry rag before application.
Remove air from under decals by applying pressure to the decals starting from the center,
and work towards edges. NOTE: If decals bubble, prick with a pin to remove the air.
11
Decals are located
in the bottom of
the cardboard box.
3
5
4
12