
Impoant Safety Information
• PikaBoost Can't Protect you in an Accident
When using PikaBoost for cycling, the most common inju is falling down, which could be due to
not switching the riding mode of PikaBoost to standby mode when stopping. PikaBoost can not
avoid being damaged after a fall. If you experience any collision, impact, or accident, please
carefully check yourself for injuries, and then before using PikaBoost for cycling again, please
contact LIVALL technicians for online guidance to thoroughly inspect your PikaBoost.
• Know Your Limits
If you attempt to use PikaBoost beyond your ability range while cycling, there may be a ceain
level of danger involved. Please understand your cycling skill level beforehand and refrain from
using it beyond your personal capabilities.
• Lifespan
PikaBoost is not indestructible, and its pas will not last forever. The PikaBoost is made to
withstand the stress of "normal" riding because those stress is well-known and understood.
However, we cannot predict the forces that might occur if you use your PikaBoost in competition,
if you ride in extreme conditions, if it is involved in a crash, if it is used for rentals or commercial
purposes, or if it is used in other ways that apply high stress of fatigue loads.
With damage, the life of any pa can be drastically reduced and may fail without warning.
The safe life of a pa is determined by its construction, materials, use, maintenance, rider weight,
bicycle type, speed, terrain, and environment (humidity, salinity, temperature, etc.), so it is not
possible to give an accurate timetable for replacement.
Any crack, scratch, or change of color in a high-stress area indicates the pa (including the
bracket and housing) has reached the end of its life and should be replaced. If you are not sure or
you don't feel comfoable inspecting or repairing your PikaBoost, consult LIVALL technicians.
Regular maintenance, frequent inspections, and frequent replacement of pas are necessa for
safe use, high-peormance PikaBoost.
PikaBoost is subjected to wear and high stress. Dierent materials and pas may react to wear
or stress fatigue in dierent ways. If the design life of a pa has been exceeded, it may
suddenly fail.
WARNING!
This product is an e-bike conversion kit equipped with a removable lithium
batte as a power source. Before using PikaBoost for cycling, please read and
comply with the following instructions carefully.
04