LIVARNO LUX 30866 User manual

IAN 30866
LED PLUG-IN LIGHT
LED PLUG-IN LIGHT
Operation and Safety Notes

GB / IE Operation and Safety Notes Page 5
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.

ON
OFF
1
2
3
45

5GB/IE
Introduction / Safety
LED plug-in light
Introduction
Congratulations on your new product.
You have selected a high quality product.
Please read carefully and completely
through these operating instructions. Fold out the
page with the illustrations. These instructions form
part of the product and contain important informa-
tion about bringing the product into use and its han-
dling. Always observe all the safety advice. Check
that the correct mains voltage is available and that
all the parts have been properly assembled before
bringing into use. Should you have any questions
or be uncertain as to how to operate the device,
please get in touch with your dealer or service point.
Please keep these instructions in a safe place and
hand them on to a third party if necessary.
Proper use
This light is suitable only for interior use, in dry and
enclosed spaces. This article is solely to be used as
a reading lamp. This article is a wall or reading
light. Do not use it as a nightlight. This lamp is in-
tended for use only in a domestic environment.
Q Description of parts
1Lamp glass
2Lamp pin
3Flexible lamp arm
4ON / OFF switch
5Mains plug
Q Technical information
Operating voltage: 230–240 V ∼ 50 Hz
Protection class: I/
Lamp: 1 LED module (9 LEDs)
(LED not replaceable)
Rated power of lamp: approx. 5.5 W
Included items
Check that all the items and accessories are present
and that the lamp is in perfect condition immediately
after unpacking.
1 LED Plug-in light, Model 2778-012L
1 LED module (preinstalled)
1 Set of instructions
Safety
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions.
No liability is accepted for consequent damage.
No liability is accepted for damage to property or
persons caused by improper handling or non-ob-
servance of the safety advice.
To avoid danger to life from
electric shock
Every time before connecting the lamp the mains,
check it and the mains lead for damage. Never
use your light if you find it is damaged in any
way.
CAUTION!A damaged light bulb means your
life is at risk from electric shock. If there is any
damage, repairs to be carried out or other
problems related to the light bulb, please contact
the service centre or a qualified electrician.
Before assembly, ensure that the mains voltage
available corresponds to the operating voltage
necessary of the light (230 - 240 V ∼ 50 Hz).
Never let the lamp come into contact with water
or other liquids.

6 GB/IE
Disposal / Warranty and ServiceSafety / Start-up / Maintenance and Cleaning / Disposal
Never open or insert anything into electrical
fittings or equipment. Doing this sort of thing can
lead to a serious danger to life from electric
shock.
To avoid danger of
fire and injury
RISK OF INJURY! Before using the light
bulb always check it for damage. Do not use
the light with a faulty light bulb.
Check the light regularly and before every use
to see if there is any damage to the casing and
mains plug. Never use the light if it shows any
signs of damage.
RISK OF INJURY FROM BURNS! Ensure
the lamp has been switched off and allowed to
cool before you touch it. In this way you will
avoid the danger of burns. Bulbs give off a lot
of heat around the top of the lamp.
Do not allow the lamp or the packaging mate-
rials to lie around unattended. Plastic film or
bags, Styrofoam etc. can turn into dangerous
toys for children.
Do not look directly into the light source (light
bulb, LED etc.).
The lamp is not replaceable.
This light is not suitable for external dimmers or
electronic switches.
In order to disconnect the light completely from
the power supply, the light must be removed
from the socket.
The light can not be repaired. If the light is
damaged, the product must be disposed of.
Safe working
Use the light in a way where in it protected
from moisture and dirt.
Remain alert at all times and always watch
what you are doing. Always proceed with
caution and do not assemble the lamp if you
cannot concentrate or feel unwell.
Please familiarise yourself with all the instructions
and diagrams in this manual and with the lamp
itself before using it.
Dispose of the lamp if the lamp glass 1is
broken or cracked.
This article is a wall or reading light. Do not
use it as a nightlight.
Start-up
Insert the lamp's mains plug 5into a conven-
tional household socket.
Use the ON / OFF switch 4to switch the
lamp on or off.
Bend the flexible lamp arm 3into the desired
position using the lamp pin 2.
Note: Do not turn the flexible lamp arm 3
completely about itself. The mains lead could
otherwise be damaged.
Maintenance and Cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
First of all pull the lamp out of the mains socket.
For electrical safety, never clean the light with
water or other fluids, or immerse it in water.
Note: The device requires no maintenance. The
lighting set cannot be replaced.
Do not use any solvents, petrol or similar. This
would cause damage to the light.
Allow the lamp to cool down completely.
When cleaning, only use a dry, lint-free cloth.
Disposal
The packaging and ancillary packing consist entire-
ly of environmentally-friendly materials. They can
be disposed of at your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to
the product and to all components bearing this
symbol. Products marked in this way may not be
disposed of along with normal domestic waste but

7GB/IE
Disposal / Warranty and Service
have to be handed in at a recycling collection point
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and to ease the burden on the environment.
Warranty and Service
Warranty Declaration
This product has a 3-year warranty from the date
of purchase; the warranty is only valid for the origi-
nal purchaser and is not transferable. Please keep
your receipt as proof of purchase. The warranty
applies to material or manufacturing defects only. It
does not cover wear parts or damage caused by
improper use. The guarantee lapses in cases of un-
authorized tampering. Your statutory rights are not
restricted in any way by this warranty. Please con-
tact the service centre by telephone. In the event of
any claims under the warranty. This is the only way
to ensure that your instrument can be returned free
of charge.
Service address
Briloner Leuchten GmbH
Im Kissen 2, 59929 Brilon, Germany
Tel.: [phone] / 97 12 - 0
Fax: [phone] / 97 12 - 1 99
E-mail: [e-mail]
www.briloner.de
IAN 30866
For all inquiries about your product, please have
your receipt and product number (e.g. IAN 12345)
ready as your proof of purchase.
Declaration of Conformity
This product fulfils the requirements of the applicable
European and national directives (Electromagnetic
Compatibility 2004/ 108/ EC, Low Voltage Directive
2006/95/EC, Ecodesign directive 2009/125 /EC,
RoHS directive 2011 / 65 / EU). Conformity has
been demonstrated. The relevant declarations and
documents are held by the manufacturer.
Manufacturer
Briloner Leuchten GmbH
Im Kissen 2
59929 Brilon
Germany
Safety / Start-up / Maintenance and Cleaning / Disposal

8

IAN 30866
BRILONER LEUCHTEN GMBH
Im Kissen 2
59929 Brilon (Germany)
Last Information Update: 04 / 2014
Ident.-No.: 2778-012L042014-6