LIVARNO LUX 307505 User manual

LED FLOOR LAMP
IAN 307505
LED-STEHLEUCHTE
Bedienungs- und Sicherheitshinweise
LED FLOOR LAMP
Operation and safety notes

GB/IE/NI Operation and safety notes Page 5
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 11
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

1 1
2 2
3 3
4a 4a
4b 4b
4c 4c
5 5
6 6
ON/OFF
A
14107202L
B
9
14128802L
77
3a
3
8 8
8
8
8
8

5GB/IE/NI
List of pictograms used........................................................................................................Page 6
Introduction...................................................................................................................................Page 6
Intended use........................................................................................................................................Page 6
Scope of delivery................................................................................................................................Page 6
Parts description..................................................................................................................................Page 6
Technical data.....................................................................................................................................Page 7
Safety.................................................................................................................................................Page 7
Safety information...............................................................................................................................Page 7
Start-up .............................................................................................................................................Page 8
Mounting the light...............................................................................................................................Page 8
Switching the lamp on/off.................................................................................................................Page 8
Adjusting the reflector.........................................................................................................................Page 8
Maintenance and cleaning...............................................................................................Page 8
Disposal............................................................................................................................................Page 9
Information....................................................................................................................................Page 9
Warranty .............................................................................................................................................Page 9
Manufacturer/Service .......................................................................................................................Page 9
Declaration of conformity...................................................................................................................Page 9
Table of contents

6 GB/IE/NI
Introduction
List of pictograms used
Read the instructions! Electric shock warning!
Danger to life!
Volt (AC) This light is not suitable for dimmer or
electronic switches.
Hertz (mains frequency) For your safety
Watt (effective power) Caution! Risk of burns due to hot
surfaces!
Safety class II b
a
Dispose of the packaging and device
in an environmentally-friendly
manner!
Observe the warnings and safety
notices! Lifespan
This light is designed only for use
indoors, in dry and enclosed rooms. ON OFF Switching cycles
LED Floor Lamp
Introduction
Congratulations on your new product.
You have selected a high quality product.
Please be sure to carefully read the com-
plete operating instructions. Fold out the page with
the illustrations. These instructions are part of the
product and contain important information on setup
and handling. Always follow all safety instructions.
Before using this product for the first time verify the
correct voltage and that all parts are properly in-
stalled. Should you have any questions or you are
unsure about operating the product, please contact
the dealer or service centre. Please keep these in-
structions in a safe place and pass them on third
parties as applicable.
Intended use
This light is only suitable for indoor use
in dry and enclosed spaces. This product
is intended for private household use
only.
Scope of delivery
Check immediately after unpacking that the parts are
complete and that the product is in proper condition.
1 LED Floor Lamp, model 14107202L, 14128802L
1 Base
1 Instructions for use
Parts description
1Reflector
2Lamp arm
3Fixing lever
3a Locating screw
4a Upper support tube
Introduction/Safety

7GB/IE/NI
Introduction Introduction/Safety
4b Centre support tube
4c Lower stand tube
5Mains cable
6Base
7
Mains plug
8Transport lock
9ON/OFF switch
Technical data
Model no.: 14107202L, 14128802L
Operating voltage: 230–240V∼ 50Hz
Lamp: 1 LED module 7W (14107202L)
1 LED module 6W (14128802L)
Protection class: II/
Safety
Safety information
Damage due to failure to comply with these operat-
ing instructions will invalidate the guarantee! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
RISK OF FA-
TAL INJURY AND ACCIDENT
HAZARD FOR TODDLERS AND
SMALL CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers. Please always
keep the product out of the reach of children.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, so
long as they are supervised or instructed in
the safe use of the device and understand the
associated risks. Do not allow children to play
with the device. Cleaning and user mainte-
nance must not be performed by children
without supervision.
Avoid the risk of fatal injury
from electric shock
Check the light for damage every time before
you use it. Never use the light if it shows any
signs of damage.
A damaged light means danger of death from
electric shock. In the event of damage, repairs
or other problems with the light please contact
the service centre or a qualified electrician.
To prevent hazards, a damaged flexible outer
lead on this lamp must be replaced by the man-
ufacturer, its service representative or an equally
qualified professional!
Before use, verify the available mains voltage
corresponds with the operating voltage of the
lamp (see “Technical data”).
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Always unplug from the mains before assembling,
disassembling, cleaning, or if the lamp will not
be used for extended periods.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
The illuminant in this light must be replaced by
the manufacturer or an authorised technician or
a similarly qualified person.
This light is not suitable for dimmer
or electronic switches.
Prevent fire and
injury hazards
RISK OF INJURY!
Check every illuminant for damage immediately
upon unpacking. Do not install the light if the il-
luminants are defective. In this case contact the
service centre for a replacement.

8 GB/IE/NI
Disposal/InformationSafety/Start-up/Maintenance and cleaning
Do not look directly into the light source (light
bulb, LED etc.).
Do not cover the lamp or the mains plug with
objects. Excessive heat can result in a fire.
Never leave the lamp unattended whilst in use.
Do not look at the LED with an optical instru-
ment (e.g. magnifier).
Safe working
Mount the light so that it is protected from mois-
ture and dirt.
Carefully prepare for assembly and allow your-
self adequate time. Organise all parts and any
necessary additional tools or materials before
starting so they are easy to reach.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never assemble the lamp if you are unfocused
or feel unwell.
In order to disconnect the light completely from
the power supply, the mains plug must be
removed from the socket.
Start-up
Mounting the light
Note: When assembling the stand tube be sure not
to damage the mains lead 5inside the lamp.
Unfold the floor lamp.
Remove the transport locks 8from the individual
parts of the upright tube 4b , 4c .
First screw together the upper tube 4a and the
centre tube 4b , turning clockwise.
Carefully pull the mains cable 5out of the
stand tube.
Now screw together the connected tube (4a +
4b ) and the lower tube 4c , turning clockwise.
Carefully pull the mains cable 5out of the
stand tube.
Screw the standpipe clockwise onto the base 6.
Plug the mains plug 7into a properly installed
socket.
Your light is now ready to use.
Switching the lamp on/off
Switch the lamp on or off using the ON/OFF
switch 9.
Adjusting the reflector
Note: Only adjust the reflector 1with the light
switched off.
Allow the light to cool off completely.
Adjust the lamp arm 2to the desired position.
Note: Retighten the locking lever 3, if the
lamp arm 2moves out of position.
Turn the reflector 1to the desired angle.
Note: Retighten the locating screw 3a if the
reflector 1moves out of position. You will
need a fitting screwdriver to do this.
Maintenance and cleaning
DANGER OF ELECTRIC
SHOCK!
First unplug the mains plug 7 from the socket.
DANGER OF ELECTRIC
SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.

9GB/IE/NI
Disposal
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Information
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In the
event of a defect arising during the warranty period,
please send the appliance to the listed Service Centre
address, making reference to the following article
number: 14107202L/14128802L.
Wear parts (such as bulbs) and damage caused by
improper handling, non-observance of the operating
instructions or unauthorised interference are excluded
from the warranty. The performance of services un der
the warranty does not extend or renew the warranty
period.
Manufacturer/Service
Briloner Leuchten GmbH & Co. KG
Im Kissen 2
DE-59929 Brilon
GERMANY
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
www.briloner.com
IAN 307505
Please have your receipt and the article number
(e.g. IAN 12345) ready as your proof of purchase
when enquiring about your product.
Declaration of conformity
This product fulfils the requirements of the applicable
European and national directives. Conformity has
been demonstrated. The relevant declarations and
documents are held by the manufacturer.
Disposal/InformationSafety/Start-up/Maintenance and cleaning

10
Inhaltsverzeichnis