Living Spaces BARNETT 305-P257255 User manual

Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small hardware which may have come loose inside the carton during shipment. Identify and count all
hardware and compare with the hardware list below.
When placing furniture on non-carpeted flooring, HMI recommends the use of floor protection such
as an area rug or furniture pads. Area rugs and padding not included with purchase.
Page 1 of 4
Made In Malaysia
PARTS LIST
No. Description Quantity
Sketch
ASSEMBLY INSTRUCTIONS
Residential Use Only
HARDWARE LIST
A
No. Description Sketch Quantity
Size
B
Top Panel
1
2Legs
1
4
C
D
Bolt Hex Com 8
5/16 x 2 1/2"
Spring Washer
Flat Washer
Wrench
M8
13MM
M8
1
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS HEAD SCREWDRIVER
8
8
ITEM 305-P257255
BARNETT END TABLE

ASSEMBLY INSTRUCTIONS
Page 2 of 4
Made In Malaysia Residential Use Only
STEP 1
STEP 2
Pull
Out
1
2
C
A
B
D
2
1
STEP 1.2
Pull
Out
STEP 1.1
Turn the Top Panel (1) upside down on the protective surface.
Pull out the Drawer to make sure it has ample of space to insert and secure the bolts.
Assembly the Legs (2) with top panel as shown.
Pull out the Drawer by nylon string as show.

ASSEMBLY INSTRUCTIONS
Page 3 of 4
Made In Malaysia Residential Use Only
STEP 3
STEP 4
STEP 5
Completed
Fixed the handle to the Drawer Head as show. STEP 3.1
Inside
Drawer
Assembly
tool screw
driver
STEP 3.2
Outside
Drawer
Push toward the Drawer until it stop.

REPLACEMENT PARTS
Page 4 of 4
Made In Malaysia Residential Use Only
x1 RP257255- PULL
Pull with Screw
x4 RP257255- LEG
Legs
x1 RP257255- DG
Drawer Glide
x1 RP257255- HWKIT
Hardware Kit
ITEM 305-P257255
BARNETT END TABLE