
User manual
2
INSTRUCTIONS FOR USE
Connect one end of t e USB cable (included) to t e Micro USB port under t e unit, and t e ot er end of t e cable
to t e USB DC 9V source inside your car. A blue lig t blinks t en turns red and .
Press t e lock button to release t e front clamp and secure t e unit onto t e grill of air vent.
T en, secure your p one safely and tig tly wit t e p one mount.
Wireless c arging of t e p one will start immediately, wit t e Red lig t around t e unit turning to Blue
and blinking.
Remove your p one from t e p one mount after fully rec arging.
IMPORTANT: Some p one cases do not support Wireless C arging due to t eir t ickness and design. If
your P one model is compatible wit Wireless C arging and you’re unable to c arge it wirelessly, please
remove your p one case and retry.
Care and Maintenance
Read t e following recommendations before using t e product. Following t ese you will be able to enjoy
t e product for many years.
•Do not expose t e device to liquid, moisture or umidity to avoid t e product’s internal circuit being
affected.
•Don’t use abrasive cleaning solvents to clean t e device.
•Do not expose t e device to extremely ig or low temperature as t is will s orten t e life of electronic
devices, destroy t e battery or distort certain plastic parts.
•Don’t dispose of t e device in a fire as it will result in an explosion.
•Don’t expose t e device to contact wit s arp objects as t is will cause scratc es and damage.
•Don’t let t e device fall on t e floor. T e internal circuit mig t get damaged.
•Don’t attempt to disassemble t e device as it may get damaged if you are not professional.
Packa e Contents
•Universal Car Vent Holder wit Wireless C arger
•USB cable
•Instruction Manual