Livoo TEA263 User manual

Instruction Manual
WWW.LIVOO.FR
Reference : TEA263
Version : 1.5
Lan ua e : En lish
Alarm clock wireless char er
fast char e

Instruction Manual
1
Thank you for buyin our LIVOO product. We take reat care in desi n, er onomics and ease of use of our
products. We hope that this product will ive you complete satisfaction.
This instruction manual is also available on our website www.livoo.fr
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THE APPLIANCE FOR THE FIRST TIME, PLEASE READ CAREFULLY THESE INSTRUCTIONS
BEFORE USING THE APPLIANCE AND SAVE IT FOR ANY FURTHER NEED.
oDo not use other cable than that supplied with the product.
oIn case of dysfunction, entrust your wireless char er to a specialist.
oNo pieces can be repaired or replaced by the user.
oAny si ns of wear and tear please discard immediately.
oMaintain your product shielded from dust, rain, water or from humidity.
oDo not subject your product to sources of inflammation or important heat. Do not throw it to the
fire.
oDo not place the wireless char er near ma nets.
oMaintain your product out of reach children.
oWipe clean with a damp cloth only. Do not use deter ents.
SPECIFICATIONS
Product color Black with blue LED light
Power 10W
In put 9Vdc/2 2A
Wireless Output 10W max
USB output 5Vdc, 1A
Built in battery Button battery, CR1220 (not included)
Charging efficiency 75%
Size of product 140*100*75mm
Weight of product 0 168kg
Package contents :
1 x Micro USB char in cable
1 x User Manual

Instruction Manual
2
PRODUCT DESCRIPTION
GENERAL OPERATION
Compatible with all devices with QI standard
Power Connection
•Plu the USB-A end of cable into the power adapter while plu Type-C end into the product.
•The product will be ready and stand by after all indicators are on.
Wireless Charging
•Indicator display: Power connection successful - blue li ht flashes once
•Standby – li ht off
•Char in – blue li ht on
•Char ed – li ht off
•FOD – blue li ht flashes continuously
Alarm Clock Function
Buttons: M, +, -, ni ht li ht button.
Time System Setting:
Double click M button to setup 12-hour time system and 24-hour time system. AM and PM will display
while 12-hour time system is set.

Instruction Manual
3
1) Click M button once to enter hour settin , adjust value with +/-.
2) Click M button once after minute settin , to enter hour settin , adjust value with +/-.
3) Click M button a third time to finish time settin .
Alarm Setting:
1. Press “+” 3 seconds to activate Alarm; Press “-” 3 seconds to deactivate Alarm. Alarm indicator is on
while alarm is activated.
2. While activated, press M button 3 seconds to enter alarm hour settin , adjust value with +/-.
3. Click M button once after alarm minute settin , to enter alarm hour settin , adjust value with +/-.
4. Click M button a third time to finish alarm time settin .
5. Alarm bell rin s 3 minutes until automatic off while no any operation.
6. Tap product to enter Sleepy Mode when bell rin s. Bell rin s for two more times after 5 minutes.
The indicator flashes and M button is out of function durin the Sleepy Mode. If time settin is
needed, please lon press “-” to stop alarm. All buttons will function normally.
7. If do not need alarm clock, click any button of the products to stop the bell and close alarm clock.
Display brightness setting
Time display bri htness can also be adjusted manually to 3 rades. “+” and “-” can be used to adjust
display bri htness manually. The default rade is max bri htness when power is connected. Sin le
click “-”to dark the display one rade.
Night Light Setting:
1. Ni ht li ht bri htness can be adjusted by 3 rades.
2. Click the round button on left side of product to turn on the ni ht li ht. The default bri htness
rade is mini bri htness.
3. Click a ain to et mid bri htness. Click a third time to et max bri htness.
4. Click the round button a fourth time to turn the ni ht li ht off.
Eco-power function:
1. Button cell inside is only for settin keepin .
2. All functions are out durin power disconnection. Functions restored when power is connected.
Note
•Attention: In order to function alarm, wireless char in , ni ht li ht and USB output all to ether,
power shall be connected by a QC2.0 or QC3.0 adapters. If connected by a 5V adapter, only wireless
char in and alarm can work to ether.
•Do not squeeze or collide.
•Do not disassemble or put into the fire, water, to avoid short-circuit leaka e.
•Do not use wireless char ers in severe hi h temperature, humidity or corrosive environments to
avoid leaka e of dama ed circuits.

Instruction Manual
4
•Do not place too close to ma netic cards (ID cards, bank cards, etc.) with ma netic strips or chips to
avoid ma netic card failure.
•Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea,
etc.) and the wireless char er to avoid potential disruption to medical devices.
•Keep children from the product in case they play the wireless char er as a toy to avoid accidents.
•To clean the char er, make sure the power supply is disconnected.
•Temperature use: 0-45℃.
•Humidity use: 20-85% (40℃)
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundolsheim – France
Declare under our own responsibility that the article:
- Description: Alarm clock wireless char er fast char e
- Reference : TEA263
to which this declaration applies, is in conformity with the applicable EU harmonization le islation :
DIRECTIVES
STANDARDS or SPECIFICATIONS
(ROHS) 2011/65/EU
The object of the declaration described above is in conformity with
Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
EU 2011/65/EU et EU 2015/863
(RED) 2014/53/EU
The notified body SGS, n°0598, has delivered the certificate RED-2489
which is valid until 05/03/2026
EN301 489-1 V2.2.3
EN301 489-3 V2.1.1
EN 303 417 V1.1.1
EN 62311 2008
EN62368-1 2014 + A11 2017
Mundolsheim, the 28/03/2022

Instruction Manual
5
Correct disposal of the unit
(Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems
countries)
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal household waste stream.
Old appliances must be collected separately in order to optimize the recovery and recyclin of the materials they contain and
reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to
remind the obli ations of separate collection. Consumers should contact their local authority or retailer for information
concernin the correct disposal of their product.
•Non contractual illustration.
•Product information is subject to chan e without prior notice.
LIVOO
BP 61071
67452 Mundolsheim