User manual
6
FOR THE FIRST USE
Clean the outside and inside of the machine cabinet with a damp cloth and wipe dry.
Before using the machine for the first time it’s better to rinse the inside kettle.
1. Fill half of the tank of fresh water. (without addendum of any product).
2. Put the switch on " ON "position. The light goes on, showing that water begins heating up.
3. When boiling, the apparatus goes out automatically
4. Raise the kettle with circumspection and empty water in a sink by watching out not to splash (risk
of scald).
5. The appliance is ready to be used.
USE
1. Unroll the power cord completely.
2. Connect the appliance in a correct socket-outlet.
3. Fill the kettle with fresh water (Do not overfill ! Use the water MAX level indicator.)
4. Place the kettle on the base.
5. Switch the machine to position “1”. The control lamp on the kettle shows that the water is heating.
6. When boiling the machine switches off automatically.
7. Take the kettle and pour gently the water in a sink. Take care to ovoid any burn.
CLEANING AND STORAGE
1. Make sure the appliance is unplugged from the supply socket and fully cooled down before
cleaning.
2. To clean the exterior surfaces, slightly wipe over with a soft damp cloth and dry thoroughly.
3. To clean the inner walls of the kettle, use a soft damp cloth or a soft brush to remove the
residues.
Note: Never use abrasive product
4. Never immerse the jug kettle or its base in water.
5. Dish washer forbidden.
6. The appliance has to be descaled regularly to ensure optimum performance. The frequency
depends on the water hardness and the boiling frequency.
•If you begin to notice the increase of the noise during boiling, or if the kettle switches off
before water being boiled, this indicates that descaling is necessary.
Generally, the descaling should be done in the following periodicity:
With soft water, at least once every 6 months.
With hard water, at least once every 3 months.
•You can use descaling agent (In this case read carefully the instructions supplied with the
product) or vinegar (0,5 liters of white vinegar 8% to a kettle).
•After the descaling, rinse the inner of the kettle thoroughly with clean water.
