Logitech Ultrathin T630 User manual

Ultrathin Touch Mouse for Mac Setup Guide Guide d’installation
1

English. . . . . . . . . . . . . . . . . 4
Deutsch . . . . . . . . . . . . . . . . 16
Français . . . . . . . . . . . . . . . .28
Italiano. . . . . . . . . . . . . . . . 40
Español . . . . . . . . . . . . . . . .52
Português . . . . . . . . . . . . . . 64
Nederlands . . . . . . . . . . . . . .76
Svenska . . . . . . . . . . . . . . . 88
Dansk . . . . . . . . . . . . . . . . 100
Norsk . . . . . . . . . . . . . . . . 112
Suomi . . . . . . . . . . . . . . . . 124
www.logitech.com/support . . . 125
English 3

Get to know your mouse
Touch
surface
Status
light Micro-USB
charging
cable
On
21
O
Connect
Bluetooth
connect
button
Bluetooth
Easy
Switch
On/Off switch
Micro-USB
port
4English

On
21
O
Connect
On
21
O
Connect
On
21
O
Connect
Set up Bluetooth
Select Bluetooth
channel
Press Connect
On your mouse
The status
light blinks
blue rapidly to
indicate the
mouse is ready
for pairing
with a Mac.
Slide the
Bluetooth
Easy Switch
to position
1 or 2.
Slide the power
switch to the
On position.
Power on
The status light
blinks while
the mouse is
discoverable—three
minutes.
English 5

Set up Bluetooth
On your Mac
After confirming that Bluetooth
is on, go to System Preferences
> Bluetooth and click to open
Bluetooth Setup Assistant.
When Ultrathin Touch Mouse
appears in the device list, select
it and click Continue. Follow the
on-screen instructions.
When pairing is complete, the
status light on the mouse lights
steadily blue for 30 seconds.
Install software
Experience all your mouse
has to offer. Install Logitech
software to enjoy smoother
performance, personalize
settings, and add gestures.
Download the software from:
www.logitech.com/support/xxx
6English

Pair with another Mac
To use your mouse with another
Mac, connect to it using the
remaining channel.
Slide the Bluetooth Easy Switch
to the unused channel and press
Connect.
Repeat the instructions in “Set
up Bluetooth”.
To reconnect to one of your
paired Macs, select the
Bluetooth channel you used
for the initial pairing.
Visit Product Central
While online, check out Product
Central, your destination
for world-class support.
You’ll find tutorials, guidelines
and troubleshooting tips, for
help using your Ultrathin Touch
Mouse for Mac.
Product Central is also home
to lively forums that connect
you to a global community of
knowledgeable users.
www.logitech.com/support/xxx
English 7

Clicking (one finger)
Gestures
Lift the non-
clicking finger
completely off
the surface.
Click. Press the left side of the
touch surface.
Right-click. Press the right
side of the touch surface.
Scroll. Swipe one finger up,
down, or sideways.
8English

Use the charging cable to
connect the Touch Mouse to
your computer or a USB power
adapter. The status light blinks
green while the mouse is
charging.
Charge your mouse until the
status light stops blinking. (A
blinking red light means it’s
time to recharge.)
Each minute of charging gives
you about an hour of use.
Charge the battery
English 9

Troubleshooting
Mouse not working?
•OnyourMac,conrm
Bluetooth is turned on.
•SlidetheOn/OffswitchtoOff,
then back to On.
•IftheBatteryStatuslight
flashes red, recharge the
battery. (See “Charge the
battery.”)
•Conrmthattheselected
Bluetooth channel (1 or 2) is
the same channel you used to
initially pair the mouse with
your Mac.
•RestartyourMac.
•ChecktheBluetoothsettings
on your Mac to see if “Ultrathin
Mouse” is listed. If so, remove
it from the list and repeat the
steps in “Set up Bluetooth” to
pair the mouse with your Mac.
Please take a minute to tell us.
Thank you for purchasing our
product.
www.logitech.com/iThink
What do you think?
10 English