Loll Designs Alfresco Bar and counter table User manual

1. 2. 3. 5. 4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure you have everything and that nothing was damaged during shipping. If damage has occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll get it taken care of straight away! To avoid scratching furniture, assemble on a clean, soft surface like a blanket, carpet, or the attened cardboard box the furniture was shipped in. Start all bolts by hand to ensure proper alignment and to prevent cross threading. Then using the provided tool, tighten until you feel resistance. Do not overtighten. Bolts should not be forced, but some components, particularly blocks, t snug but can still be installed without tools or excess force. If parts are still not going together, please send us a photo of the part you are having trouble with.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable. The cardboard box, paper wrap, ller and paper bags can all go in your recycling bin. The muslin hardware bags replaced plastic bags with the intention of reducing plastic and encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos For product care & maintenance, visit www.lolldesigns.com/care-maintenance For further lollygagging assistance, please reach out! [phone] [email protected] 5912 Waseca Street Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION Insert bolts through countersunk hole side of blocks as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
INCLUDED PARTS
24x
MB
18x
GB
2x
L1-P8
2x
P5
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2)
P3 (X2)
P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
Bar Height Legs
P4 (X2)
P1 (X2)
P3 (X2)
P2 (X2)
P5 (x2) P7 P6 (2)
P8 (X2) P9 (X2)
Micro Block (X22)
1/2" Button Head (22)
G Block (X12)
1" Bolts (X36)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Counter Stool P1L Counter Stool P1R
P2L P2R
P4 P5 P6
P3 (X4)
Bar Stool P1L Bar Stool P1R
1.375" Bolt (X4)
1/2" Bolt (X18)
Micro Block (X18)
Bolts shown actual size.
*** Please double check the bolt size required on each step.
Use of wrong bolts will result in damage of product.***
16x
1/2˝
8x
1˝
42x
1˝
2x
P1
2x
P4
2x
P2
4x
L4
2x
P3
2x
P6
1x
P7
ALFRESCO BAR +COUNTER
TABLE 72X36

1
2
3
8x
1x
4x
1x
1x
1x
1x
MB
P7
L2
L1-P8
L1-P8
P6
P6
8x
1˝
12x
1˝
12xGB

4
5
6
6x
1˝
6x
1˝
2x
1x
1x
P5
P4
P1
4xMB
4x
1/2˝
6xGB

7
6x
1/2˝
6x
1˝
1x
1x
P2
P3
8
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
P1 (X2) P2 (X2)
P3 (X2) P4 (X2)
L2 (X4) P5 (X2) P6 (X2)
P7
L1-P8 (X2)
P1 (X2) P2 (X2) P3 (X2) P4 (X2)
Micro Blocks (X24)
1/2" button (X16) 1" Button (X8)
G Block (X18)
1" Flat (X42)
Bar height legs
6xMB
REPEAT STEPS 6-8 TO ATTACHED REMAINING P1, P2, P3, AND P4 LEG PARTS.