2x
MB
1x
P13
6x10x2x
1˝1˝1/2˝
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
*Bolts shown actual size.
INCLUDED PARTS
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
1x
P3
1x
P2
1x
P4
P6_L
P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P6_R
P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P5
P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
1x
P5
1x
P6R
1x
P6L
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R
P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8
P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
1x
P8
1x
P7
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
2x
P9
8x
P10
2x
P12
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
P1_L P1_R
P2 P3
P4
P5 P6_L P6_R P7
P8 P9
P10
P12
P13
MICRO BLOCK (2)
1" COUNTERSINK
BOLT (10)
1" SOCKETCAP
BOLT (6)
.5" BUTTONHEAD
BOLT (2)
(X8)
(X2)
1x
P1L
1x
P1R
1.
2.
3.
5.
4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure
you have everything and that nothing was damaged during shipping. If damage has
occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll
get it taken care of straight away!
To avoid scratching furniture, assemble on a clean soft surface like a blanket, carpet, or
theattenedcardboardboxthefurniturewasshippedin.
Start all bolts by hand to ensure proper alignment and to prevent cross threading.
Then using the Allen Key or Loll Tool, tighten until you feel resistance.
Bolts should not be forced, but some components, particularly the blocks will need a bit
ofmuscletogetthemtogetherastheyaremachinedforasnugt.Ifpartsarestillnot
going together, please send us a photo of the part you are having trouble with.
You can use a cordless screw gun if you have one and know how to use it. Set the
clutch setting at low to medium torque. We do not recommend using an electric drill
without a clutch to install bolts as you can easily overtighten and damage the product.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable.
Thecardboardbox,paperwrap,llerandpaperbagscanallgoinyourrecyclingbin.The
muslin hardware bags replaced plastic bags with the intention of reducing plastic and
encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL
For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos
For product care & maintenance, visit www.lolldesigns.com/care-maintenance
For further lollygagging assistance, please reach out!
+1 877-740-3387
5912 Waseca Street
Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION
Insert bolts through countersunk hole side of blocks
as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder
LOLLYGAGGER ROCKER
