Loll designs Gladys User manual

ASSEMBLY INSTRUCTIONS

ASSEMBLE SIDES & BRACES

ATTACH BACK

ATTACH SEAT

ATTACH HEAD

*Please read assembly Assembly Tips ﬁrst.

Fit Braces with Left Side cut outs. Place Lock Blocks in the Braces cut outs, insert

bolts through the blocks into Left Side threaded holes and ﬁnger tighten. Repeat step

to attach Right Side.

Fit Back cutouts with long tabs of chair sides. Attach using Lock Blocks and bolts,

ﬁnger tighten.

Fit Seat cutouts (decal towards back) with short tabs of assembled chair sides. At-

tach using Lock Blocks and bolts, ﬁnger tighten.

Fit Head cutouts with top tabs of chair sides. Attach using Lock Blocks and bolts,

ﬁnger tighten.

*Complete assembly by securely tightening all bolts with provided wrench.

* It is very important that you ﬁnger tighten all bolts into inserts to ensure that you do not cross-thread bolts and inserts before tightening. It

will also be easier if you wait to tighten bolts until you have all bolts installed and the piece completely assembled. This will allow for more

movement of individual pieces and help in aligning holes with inserts. Use the Allen Tool provided to ﬁnish tighten bolt until snug.

Step 1 and repeat

Step 2

Step 3

Step 4

Step 1 and repeat

Ste

p 2

Step 3

Step 4

Step 1 and repeat

Step 2

Step 3

Step 4

Step 1 and repeat

Step 2

Step 3

Step 4

PRODUCT CARE

Your new Loll furniture is a no maintenance product. You’ll never need to paint or stain it and it can be

left outside all year regardless of the season. It will not rot, even if left standing in water. Nonetheless,

we’re pretty sure your Loll furniture will get a lot of use and will at some point need cleaning. We

recommend a garden hose and incorporating a soft bristle brush. Adding a tablespoon or two of your

favorite eco-friendly soap to the wash will get everything squeaky clean. Mineral deposits left over

from hard water can be removed with a solution of vinegar and water. Loll offers a cleaning kit that has

everything you need for great results. Also see our cleaning video at lolldesigns.com/videos.

5 YR WARRANTY

Loll Designs strives to build long-term relationships based on conﬁdence and trust with our customers.

We sit beside, on top, and beneath the quality of our ﬁne furniture and will make things right if you

are not completely satisﬁed with your purchase. Loll Designs hereby guarantees that the piece will be

of good quality and workmanship, free from faults and defects. Loll warrants that all components will

not fail, under normal use, for ﬁve years from the year mark on the piece or the date of purchase. *For

commercial orders the warranty is three years.

SHARE YOUR LOLL

ASSEMBLY INSTRUCTIONS & PRODUCT INFO:

We want you to love your Loll.

Reach out if you need

lollygagging assistance.

877-740-3387

[email protected]

5912 Waseca Street | Duluth, Minnesota 55807

DAMAGED PRODUCT

Sometimes accidents occur. Please inspect your Loll furniture when you receive it to make sure that

it has not been damaged during shipping. If damage has occurred please take digital pictures of the

damaged furniture and the box it was shipped in, and email them to [email protected] or call

Customer Service using our toll free number: 877.740.3387, ext. 1. The damage will be assessed and

you will be contacted with a solution to the problem. It may be helpful to save all of your packaging

material in case a return is necessary.

ASSEMBLY TIPS

*Please read before beginning assembly!

To avoid damaging furniture perform the assembly of your Loll furniture on a clean

soft surface like a blanket, carpet, or the ﬂattened cardboard box the furniture

was shipped in. Components should not be unnecessarily forced together! If

it seems parts aren’t ﬁtting together you likely have something wrong and you

should reread the instructions to ensure you are aligning the proper components.

If your piece of furniture requires “Blocks” for assembly one side may have

protective ﬁlm on it. This surface is hidden after assembly so the ﬁlm can remain

on the block or it can be removed. Use a Cordless Screw Gun if you have one

and know how to use it. Set the clutch setting at medium torque. We do not

recommend using an electric drill with a cord and without a clutch to install bolts

in inserts as you can easily overtighten and damage the product. All bolts come

standard with a thread coating to reduce bolts loosening after assembly while

still allowing removal and reuse of the bolt. Start all bolts by hand, with the Allen

Key, or the Loll Tool and tighten ﬁrmly until parts are drawn tight together and

you can’t muscle the bolt any tighter. It’s virtually impossible to over tighten by

hand. Watch the assembly videos at www.lolldesigns.com/videos for even more

information and visual aids. If you have more questions please contact your Loll

Sales Associate or Customer Service for support at 877.740.3387. A

Pro Tool Kit

can also be purchased from Loll for multi piece assembly jobs.

** Please Recycle the BOX and paper packaging. The green plastic stretch

wrap we use is compostable.

LOLL TOOL

Locate the box marked

“Tool Included”

before beginning assembly.

BLOCK & BOLT INSTALLATION

Insert bolts through countersunk hole side of blocks as shown below.

CORRECT INCORRECT

Countersunk

Hole

Scan for assembly

tips and videos

lolldesigns.com

877.740.3387

Loll Designs inspires people to appreciate the outdoors.

GLADYS

1˝ BOLT 5/32˝ ALLEN

WRENCH

INCLUDED HARDWARE

14 1

COUNT COUNT

COUNT

SIDE 1

COUNT

HEAD 2

COUNT

BRACE

COUNT

BACK 1

COUNT

SEAT 14

COUNT

LOCK BLOCK

INCLUDED PARTS

Insert bolts through countersunk side

Left Side Right Side

Brace (x2)

Seat

Back

Head