Loll Designs SATELLITE User manual

1.
2.
3.
5.
4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure
you have everything and that nothing was damaged during shipping. If damage has
occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll
get it taken care of straight away!
To avoid scratching furniture, assemble on a clean soft surface like a blanket, carpet, or
the attened cardboard box the furniture was shipped in.
Start all bolts by hand to ensure proper alignment and to prevent cross threading.
Then using the Allen Key or Loll Tool, tighten until you feel resistance.
Bolts should not be forced, but some components, particularly the blocks will need a bit
of muscle to get them together as they are machined for a snug t. If parts are still not
going together, please send us a photo of the part you are having trouble with.
You can use a cordless screw gun if you have one and know how to use it. Set the
clutch setting at low to medium torque. We do not recommend using an electric drill
without a clutch to install bolts as you can easily overtighten and damage the product.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
LOLL TOOL
Locate the box marked
“Tool Included” before
beginning assembly.
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable.
The cardboard box, paper wrap, ller and paper bags can all go in your recycling bin. The
muslin hardware bags replaced plastic bags with the intention of reducing plastic and
encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL
For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos
For product care & maintenance, visit www.lolldesigns.com/care-maintenance
For further lollygagging assistance, please reach out!
[phone]
[email protected]
5912 Waseca Street
Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION
Insert bolts through countersunk hole side of blocks
as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder/CEO
INCLUDED PARTS
4
DB
AB
BB
DB
GB
7/8" Blot
1" Bolt
1 1/4" Bolt
AB
BB
DB
GB
7/8" Blot
1" Bolt
1 1/4" Bolt
*Bolt shown
actual size
OVAL RND/RECT
14x 16x
1˝ BOLT
8x
GB
6x
RND/RECT OVAL
1x
TABLE TOP
4x
TABLE
LEG
X2
X8 X4
X16 X4
X2
X8 X4
X16
X4
LONG SUPPORT
4x
ROUND
2x
OVAL
2x
RECT.
2x
SHORT
SUPPORT
RND/RECT
RECTANGLE OVAL
ROUND
SATELLITE TABLE

1
2
3
REPEAT STEP 2 FOR REMAINING LONG SUPPORT
PROCEED TO STEP 3 TO COMPLETE ASSEMBLY FOR OVAL
AND RECTANGLE TABLES
REPEAT STEP 3 TO ATTACH REMAINING SHORT SUPPORT
1x
1x
1x
3x
2x
1x
1x
DB
LEG
GB
LONG
SUPPORT
SHORT
SUPPORT
2x
1˝
FLAT
HEAD
3x
2x
1˝
FLAT
HEAD
1x
1˝
FLAT
HEAD
TABLE
TOP
1xGB
REPEAT STEP 1 TO REMAINING LEGS
RECTANGLE
OVAL/ROUND
RECT.
OVAL/RND