Loll Designs ALFRESCO SQUARE TABLE User manual

2x
P8
2x
P6
1x
P7
1x
P9
2x
P5
*Bolts shown
actual size.
INCLUDED PARTS
17x
GB
2x
P1
2x
P2
2x
P3
2x
P4
41x
1˝
Top Left Leg X2 Right Leg X2
Moon Block X4 G Block X12 1" Bolt X 20
1. 2. 3. 5. 4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure you have everything and that nothing was damaged during shipping. If damage has occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll get it taken care of straight away! To avoid scratching furniture, assemble on a clean, soft surface like a blanket, carpet, or the attened cardboard box the furniture was shipped in. Start all bolts by hand to ensure proper alignment and to prevent cross threading. Then using the provided tool, tighten until you feel resistance. Do not overtighten. Bolts should not be forced, but some components, particularly blocks, t snug but can still be installed without tools or excess force. If parts are still not going together, please send us a photo of the part you are having trouble with.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable. The cardboard box, paper wrap, ller and paper bags can all go in your recycling bin. The muslin hardware bags replaced plastic bags with the intention of reducing plastic and encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos For product care & maintenance, visit www.lolldesigns.com/care-maintenance For further lollygagging assistance, please reach out! [phone] [email protected] 5912 Waseca Street Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION Insert bolts through countersunk hole side of blocks as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder
ALFRESCO SQUARE TABLE

1
2
2x
1x
2x
3x
1x
P8
P7
P6
GB
P9
3x
1˝
6x
1˝
6xGB
2xP5

3
4
6x
1˝
10x
1˝
1x
1x
1x
1x
P1
P4
P3
P2
4xGB
REPEAT STEP 3 AND 4 FOR REMAINING LEGS