LOMBARDINI MARINE LDW 194 JMTI Specification sheet

1
LDW 194 JMTI
LDW 245 JMTI/A
Installation - Use-maintenance
All manuals and user guides at all-guides.com
all-guides.com

2
This manual has been specially designed to provide
you with all the necessary information to keep your
engine perfectly efficient for many years.
Please read it carefully and follow precisely any
described installation and maintenance operations.
Lombardini Marine service network shall, in any
case, be at your complete disposal for any clarifica-
tions or advice.
LOMBARDINI MARINE
All manuals and user guides at all-guides.com

3
Coolant replenishing Prescribed coolant:
50% Total antifreeze
50% Water
Reduction-reversing gear oil filling Prescribed lube:
Total SAE 15W40
(API CG4/ACEA E2)
Total Rubia 4400 15W40
Oil level check Prescribed lube:
Total quartz SAE 10W40
Quartz Diesel 7000 10W40
Activa Disel 7000 10W40
All manuals and user guides at all-guides.com

4
Index
Pag. 7
Pag. 9
Pag. 16
Pag. 33
Pag. 35
Pag. 54
Pag. 88
Pag. 91
Pag. 94
Pag. 6
OVERALL DIMENSION
IIDENTIFICATION
USE
MAINTENANCE
STORAGE
MAIN CIRCUITS
INSTALLATION
SERVICE
WARRANTY CLAUSES
CHARACTERISTICS
All manuals and user guides at all-guides.com

5
Prior to starting read and follow instructions. Failure to do so will make warranty void.
Accessory set supplied with the engine Request if not to supply
All manuals and user guides at all-guides.com

6
Characteristics
* With TM 485 A reversing gear box
194 245
Extreme power kw/cv 132.3/180 176.4/240
R.P.M. 3900 4200
Bore mm 82.0 82.0
Cylinders N. 4 5
Max. Running inclination
β20° 20°
Max. Installation inclination α10° 10°
Cooling system capacity l 7.5 8.5
Dry weight with reversing gear Kg 284* 315*
Reduction/reversing gear oil quantity l 2.6* 2.6*
Engine oil quantity l 5.5 7.0
Displacement cm31910 2387
Stroke mm 90.4 90.4
All manuals and user guides at all-guides.com
all-guides.com

7
Overall dimensions
With TM 485 A reversing gear box
LDW 194 JMTI
All manuals and user guides at all-guides.com

8
With TM 485 A reversing gear box
LDW 245 JMTI/A
Overall dimensions
All manuals and user guides at all-guides.com

9
Heat exchanger
Sea water pump
Exhaust line outlet
Turbocharger protection
Upper cover
Intercooler
Identification
Oil suction pump
Turbocharger
Air filter
Oil filter and cooler
Eyebolt
All manuals and user guides at all-guides.com

10
Belts protection
Cooling fluid filling cap
Oil dipstick
Oil filling cap
Alternator
Accelerator lever
Fuel filter
Low pressure diesel oil pump
Eyebolt
Identification
All manuals and user guides at all-guides.com

11
Fuse
Start
Starter switch
Oil Thermometer or Gauge
Revolution counter
De Luxe maxi panel
Water thermometer
Voltmeter/Hour counter (LCD)
Identification
Warning lamps
All manuals and user guides at all-guides.com
all-guides.com

12
De Luxe maxi panel
Identification
All manuals and user guides at all-guides.com

13
Vibration mounts
Identification
All manuals and user guides at all-guides.com

14
To accelerate
To decelerate
Accelerator lever
Predisposed for C3 cable
Identification
All manuals and user guides at all-guides.com

15
Reduction reversing gear technodrive TM 485 A
P.T.O.
Reverse reduction gear lever
Oil filling cap
Identification
All manuals and user guides at all-guides.com

16
Installation
All manuals and user guides at all-guides.com
all-guides.com

17
When you design the engine room, observe accessibility necessary for main-
tenance and repairs on the engine.
Also ensure that whole engine can be removed without damaging the
structure of the boat.
Maintenance which requires accessibility:
Engine and gearbox oil draining and refilling;
Engine coolant draining and refilling;
Oil filter exchange;
Fuel filters exchange;
Air filter exchange;
Belts check and replacement;
Hoses check and replacement;
Raw water pump impeller replacement;
Strainer cleaning.
All manuals and user guides at all-guides.com

18
Propeller
Propeller shaftCoupling flanges Waterline
Raw water system
1
2
34
4
All manuals and user guides at all-guides.com

19
Ø min. 1” 1/2 (38.1 mm)
Ø min. 1” 1/4 (31.75 mm)
min. 110 l/min
Sea cock
1
Water intake valve
2
Raw water strainer
3
Ø min. 1” 1/4 (31.75 mm)
All manuals and user guides at all-guides.com

20
Use a semiflexible hose with steel core and smooth internal surface
Øi30.0 mm
Suction hose
4
All manuals and user guides at all-guides.com