Lorex SG7530PK4 User manual

Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.lorexcctv.com
QUICK START GUIDE
www.lorexcctv.com
Lorex Technologies Inc.
Copyright © 2010 Lorex Technologies Inc.
As our products are subject to continuous
improvement, Lorex reserves the right to
modify product design, specifications and
prices, without notice and without incurring
any obligation. E&OE
IT’S ALL ON THE WEB!
Camera Specifications
HIGH RESOLUTION
WEATHERPROOF
COLOR CAMERA
WITH NIGHT VISION
Dimensions:
Image Device 1/4” Color Image Sensor
Effective Pixels 656H x 492V
Scanning System
Resolution
AES Shutter Speed
S/N Ratio
Sync. System
Min. Illumination
White Balance
Video Output
Lens
Power Requirement
Power Consumption
Operating Temp
Operating Humidity
2:1 Interlace
NTSC: 525 Lines
Horizontal 450 TV lines
1/60 ~ 1/50,000 sec.
More than 48dB (AGC off)
Internal
3 LUX @F1.2 (no LED)
0 LUX (with LED)
AWB
1.0 Vp-p (75 ohms)
Fixed Lens (3.6 mm)
DC 12V ±10%
With IR: Max 280mA
W/o IR: Max 90mA
14°F ~ 122°F
(-10°~ 50°C)
Within 90% RH
Viewing Angle H: 59°; V:44°; D: 73°
IR Night Vision 18 IR LED / 850 nm / 50’
(15 m)
Termination BNC
FOV (Diagonal) 73 Degrees
Weight (With Stand) 0.60 lb / 0.27 kg
MODEL: SG7530PK4
English Version 1.0

1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.
NOTE: The camera can be mounted to either a wall or
a ceiling.
2. Aim the camera. Remove
the protective film from the
lens.
3. Connect the 60ft
extension cable to the
camera.
ATTENTION: Test the camera prior to selecting a permanent
mounting location by temporarily connecting the cameras and
cables to the system.
Wall Mount Ceiling Mount
Secure mounting stand to
the top thread for ceiling
mount.
Secure mounting stand to
the bottom thread for
counter-mounts or wall
mounts.
Remove film
Video
(BNC Connector)
Power
(Power Connector)
To Camera:
Connect the BNC and
power connectors to
the camera.
To Monitor/DVR:
Connect the BNC connector to the video
input of the monitor/DVR, and connect
the power connector to a
power adapter.
Package Contents Installing the Camera Camera Diagram
4 x Cameras
Infrared LEDs
Lens
Wing Fastener
BNC connector
Features:
• High Resolution Image Sensor
• IR Cut Filter provides accurate color reproduction in all
lighting conditions
• 18 High Intensity IR LEDs provide effective night vision
range up to 50 ft. (15 m)*
• Day/Night mode: Picture automatically switches to
B&W delivering better clarity in low light conditions
• Weatherproof cameras ideal for indoor and outdoor
applications (IP66)**
• A single 4-in-1 power adaptor provides power to all 4
cameras
• Industry standard BNC termination
• 60 ft. (18 m) extension cable included per camera
• Ceiling, counter or wall mountable camera with
versatile stand provides flexible mounting options
* Night vision range up to 50 ft. (15 m) in ideal conditions. Objects at or
beyond this range may be partially or completely obscured, depending on the
camera application.
**Not recommended for submersion in water.
NOTE: This camera includes a mechanical Auto IR Cut Filter. When
the camera changes between Day/Night lighting, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates the camera filter is working.
4 x 60’ (18 m) BNC
Extension cable
4 x Camera stands
1x 4-in-1 Power adapter Mounting Tips & Connectivity
To tighten, twist clockwise.
To loosen, twist counter-
clockwise.
2. Tighten the washer by
twisting clockwise to secure
the mounting stand onto the
camera.
1. Twist the camera into the
threaded screw until the camera
is snug.
Power Connector