Lorex CVC6997HR User manual

LOREX Technology Inc.
Copyright © 2006 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to mod-
ify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
Quick Set-up Guide
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.lorexcctv.com
4. Camera Specifications H O M E & B U S I N E S S S E C U R I T Y
100FT/30M NIGHT VISION
HIGH RESOLUTION COLOR
BULLET CAMERA
Specifications:
Dimensions:
Model: CVC6997HR
Horizontal Res. 480 TV lines
# Effective Pixels
Sync. System
S/N Ratio
Electronic Shutter
Illumination
IR Distance
Lens
Video Output
LED
Power Supply
Operating Temp
IR LED Wavelength
768 (H) x 494 (V) (380K)
Internal Sync.
>48dB (AGC Off)
0 Lux / F 1.2 (LED on)
100 ft. / 30 m.
Fixed 6.0 mm
1.0Vp-p @ 75 ohms
23 LED
DC 12V ± 10% 600mA
14°F ~ 113°F
(-10°~ 45°C)
850 nm
Image Sensor Hi-Res 1/3” Color CCD
1/60 ~ 1/10,000 Sec.
Dimension 7.9” (H) x 6.9” (D)
200mm (H) x 175mm (D)

1. Package Contents 2. Installing the Video Camera 3. Connecting the Camera
1 x 60 ft. extension cable
1 x BNC to RCA Adaptors
1 x AC Power Adaptor
1 x CVC6997HR Hi- Res
Color Day/Night IR
Camera
1 x Mounting Bracket /
Stand
1. Attach the camera to the supplied stand.
2. Mount the camera stand to the desired mounting
surface
3. Connect the 60ft Extension cable to the camera:
The mounting stand is designed to permanently
mount the camera to a surface.
BNC (VIDEO)
(Yellow Connector)
POWER
(Black Connector)
CAMERA
CONNECTIONS:
Connect the BNC
and Power cables to
the Camera
VIDEO INPUT
CONNECTIONS:
Connect the BNC cable to
the video input of the
monitor, and connect the
power adaptor to an
outlet.
4. Connect the BNC end of the 60ft Extension Cable
to the DVR / Observation System or to a TV/VCR.
5. Connect the A/C Power Adaptor to the 60ft Exten-
sion cable (Black connector). Plug the Power
adaptor to a wall outlet
Setup Diagram:
Connect the BNC to RCA Adaptor as needed to
allow for proper connectivity.
Features:
• High resolution 1/3” Color CCD Image Sensor
(480 TV Lines and 380,000 effective pixels)
• 23 High Intensity IR LEDs provide effective night
vision range of over 100ft.*
• Weatherproof** Design (IP67) with Armor Cable:
ideal for indoor and outdoor installations.
• Day/Night Mode: Picture automatically switches
camera to B&W delivering better clarity in low
light conditions
• Ceiling or Wall Mountable
* IR Illumination range of 100 ft under ideal conditions. Objects at
or beyond this range may be partially or completely obscured,
depending on the camera application.
** Not recommended for direct exposure to water, rain, or snow.