Preparation before use How to use
How to put batteries
Open
battery cap
protrusion
release mark
protrusion
lock mark
close
battery cap
power button
mode indicator
Release the lock: Align the
protrusion on the battery
cap with the release mark
as figure.
Insert batteries
according to + /- of
battery case.
AAA battery
Lock: Align the protrusion
on the battery cap with
the lock mark as figure.
start
mode 1
mode 2
off
Mode 1 indicator lights
Mode 2 indicator lights
Press the power button on the main unit to start operation.
“Drowsy mode”
“Relax mode”
The rhythm changes
slowly at frequencies
between 40Hz and 100Hz.
The rhythm changes more
slowly at frequencies
between 40Hz and 100Hz.
*The timer function will automatically turn off the power after roughly 3 minutes has passed since turning on.
Example of use
Prohibited
*Do not soak or wash with water.
*Do not use on parts other than the head.
< It may cause an accident or injury.>
Compatible with waterproof function, IPX5.
*IPX5: There is no effect on water jets from all directions.
mode indicator off
All operation stops
<Use hands-free> <Move slowly up and down for use>
Turns the power on / off and switches modes.
Each time the button is pressed, the display changes as
follows.