Lovencare BP 930 User manual

BY-MY-SIDE
CO-SLEEPER
IMPORTANT- RETAIN FOR FUTURE REFERENCE - READ CAREFULLY
BP 930

By-My-Side Co-Sleeper allows parents to sleep next to their baby without
sharing the same bed. It can be used as a normal crib or as a co-sleeper.
It can be adjusted to 6 different height levels and can be used at an
inclined level to help with baby’s congestion and reflux.
BY-MY-SIDE
CO-SLEEPER

WARNING !!
• This product is intended for use for babies aged between 0 and 6 months, weighing up
to a maximum of 9 kg.
• WARNING: When a child is able to sit, kneel or to pull itself up, the crib shall not be used
anymore for this child.
• WARNING: Be aware of the risk of open fires and other sources of strong heat, such as
electric bar fires, gas fires, etc.
• Before assembly, check that the product and all of its components have not been
damaged during transportation. Should any part be damaged do not use and keep out
of reach of children.
• WARNING: Do not use the product if any part is broken, torn or missing.
• WARNING: the product is ready for use only when all locking mechanisms are
engaged. Check carefully that these are engaged before use.
• WARNING: When the child is left unattended in the product, in ‘’crib mode’’,
always make sure that the side rail is raised and the zippers are completely closed.
• All opening, adjusting, anchoring and positioning operations of the product must
be carried out exclusively by an adult.
• Before using in ‘’Co-sleeping mode’’ (Fixed to the bed)’’ make sure the product is
properly anchored and positioned.
• The product must always be placed on a horizontal surface. Never leave the product
on an inclined surface with the child inside of it.
• WARNING: When the product is used in ‘’Co-sleeping mode’’ (Fixed to the bed)’’, before
laying the child in it, make sure that the connection belts are hooked and tensioned
properly, the product must be secured to the parents’ mattress and no gaps between
the products and the adults’ mattress must be present.
• Make sure the users of this product are knowledgeable on its proper operation.
• Children must not be permitted to play without supervision near the product.
• Use only spare parts approved by the manufacturer. Do not apply accessories to the
product, which are not supplied by the manufacturer.
• Do not adjust the product with the child inside.
• Do not move the product with the child inside.
• Do not leave any object inside the product that could reduce its depth.
• Do not position the cot near walls and obstacles to prevent trapping hazards.
• Do not leave small objects inside the product to prevent choking hazards.
• Do not use the product with more than one child at a time.
• Do not use the product without the frame.
• Keep the fastening belts away from the reach of children.
• If you purchase a mattress separately, make sure it is suitable for the product.
• The product must be kept away from electric cables and cords: do not place the
product near windows where cords, curtains or similar objects could pose choking or
strangling hazards for the child. To avoid strangling hazards, do not give to your child or
place near him, objects equipped with cords.
• A prolonged exposure to the sun may cause changes of tones to the product’s colour.
After a prolonged exposure of the product to high temperatures, wait a few minutes prior
to placing your child in it.
• When not in use, keep the product away from the reach of children.
• All assembly fittings should always be tightened properly and that care should be taken
that no screws are loose, be-cause a child could trap parts of the body or clothing
(e.g. strings, necklaces, ribbons for babies’ dummies, etc.), which would pose a risk of
strangulation.
• Discontinue using the product if damaged and contact Love N Care for assistance.

COMPONENTS
1. MATTRESS
2. COVER
3. RAILS
4. LEGS
5. SUPPORT STRUCTURE
6. STRAPS (FIXING BELTS)
1
2
3
4
5
6

ASSEMBLY OF THE CRIB
1. Hold the support leg making sure that the external tube slides upwards until you
hear the locking CLICK in the first position (fig. 1). Repeat the same operation with the
other support leg.
2. Fix the fabric lining to the assembled structure, (fig. 2-3)
3. Subsequently fix the upper structure to the legs, inserting the rail support as
illustrated in (fig.4). Push down¬wards until you hear the CLICK of correct fixing
Carry out this operation for both sides.
4. Close the zipper of the fabric cover over the fixed rail (fig.5)
5. Slide the Removable rail inside the pocket of the fabric cover (fig. 6)
6. Fix the removable legs rail to the legs (fig. 7)
7. Close the fabric cover using the side zipper (fig.8)
8. Place the mattress on the bottom of the crib (fig.9)
123
456
7 8 9

HEIGHT ADJUSTMENT
The crib can be adjusted to different height positions.
In order to adjust the height, pull the adjustment lever
upwards and lift the crib to the desired position (fig. 10).
Repeat this operation on the opposite side.
The base of the crib can be inclined slightly by adjusting
the 2 legs to different heights.
WARNING: The head of the child should always be
positioned on the highest side
10

C0-SLEEPING MODE
The crib can be fixed to the parent’s bed (co-sleeping mode).
WARNING – IMPORTANTFOR THE SAFETY OF YOUR CHILD: this method is only possible
with bed types that comply with all of the conditions described.
In particular the side support of the crib should always be put close to the parent’s
mattress and the mattress should always be aligned with the height of the side support
for restraint of the crib. Furthermore, the crib should be firmly fixed to the structure of the
parents bed or to the mattress support (net or slats).
WARNING: Check to make sure that the crib in the co-sleeping mode does not interfere
with the parent’s bed.
WARNING: During use, make sure that the parents bed sheets, blankets etc. do not enter
and cover the interior of the crib.
1. Open the side of the crib with the window using the side zips and open them
completely (fig.11)
2. Remove the removable rail on one side and then on the other (fig. 12). Once this
operation has been performed on both sides, remove the tube and fix it to the legs of the
structure using the relative supports (fig. 13).
WARNING: use the crib with the tube lowered,
only in the co-sleeping mode.
3. Move the crib close to the parent’s bed and check the height of the crib compared with
the mattress of the bed.
WARNING: the height of the parent’s mattress should always be more than that of the side
support for containment of the crib (fig. 14).
WARNING: in the co-sleeping mode the 2 legs of the crib should always be adjusted to
the same height.(fig.15)
4. In order to fix the crib to the parents bed (co-sleeping mode) use the pair of straps
provided. Fix the buckles underneath the fabric lining on both sides. Repeat for both
sides. Subsequently fix the belt around the structure of the par¬ent’s bed, from the bottom
towards the top and fix the buckle). Repeat this operation on the other side.
For easier installation, during fixing of the buckles, we suggest that the crib is kept at
a short distance from the parent’s bed.
WARNING: before every use always check to make sure that there is no space between
the parent’s mat¬tress and the side of the crib. If there is, pull the belts firmly to tighten
until there’s no space and the permitted condition of use has been restored.
Store any excess of belts inside the pocket positioned on the bottom of the fabric lining.

11 12 13
14 15 16
C0-SLEEPING MODE

The removal/application activities should be carried out by adults only.
On a regular basis check the condition of the product and the presence of
any possible damage.
In the case of damage do not use it and keep it out of the reach of children.
Contact Love N Care on 1300 732 599 to replace or repair the crib.
The crib and the mattress have a resistant fabric cover, which is completely
removable and washable.
For washing of the fabrics, carefully comply with the instructions indicated
on the label.
For cleaning do not use solvents, abrasive products or aggressive products.
Hand Wash in cold water
Do not bleach
Do Not Tumble dry
Do not Iron
Do Not Dry clean
CARE AND MAINTENANCE

Warranty Against Defects
12 MONTH WARRANTY
BY-MY-SIDE CO-SLEEPER BP 930
All Love N Care products are guaranteed for twelve months from the
date of purchase. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure. This covers against faults which develop
through faulty materials and workmanship.
Misuse, accidental damages,normal wear and tear or neglect are
not covered. If a fault becomes apparent, please return the item to
the store of purchase with your receipt. You must inform the storewhat
the defect is. We will then arrange for its repair or it will be
assessed for replacement as expediently as possible. The benefits
of this warranty are in addition to other right and remedies under the
law in relation to the goods or services to which this warranty relates.
If you are unable to return the item to the store of purchase, you can
contact Love N Care on free call 1300 732 599.
Where you send the product directly to the manufacturer then you
may be liable for the costs of transportation to and from Love N Care.
Love N Care will meet the reasonable expenses incurred by a consumer
in a making a warranty claim. You can claim expenses incurred in
making a claim by contacting our customer service team on
1300 732 599 or by email at [email protected]

BY-MY-SIDE
CO-SLEEPER

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
www.lovencare.com.au
Contact Us
LETS BE FRIENDS
https://www.instagram.com/lovencare/
www.lovencare.com.au