Lovencare MIAMICOT HK 100 User manual

ECNEREFERERUTUFROFSNOITCURTSNIESEHTPEEKESAELP
MIAMI COT
HK 100

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

This cot has been designed for a child up to 25kg
Do not leave your child unattended when the dropside is in the lower position
RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measure
690mm wide by 1300mm long and 130mm in thickness.
sides and ends of the cot will not exceed 40mm. This is to minimize the risk of a childs limb becoming
is greater than 500mm with the mattress base in the lower position to minimise the risk of a child climbing
or falling out of the cot.
WARNING TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
The manufacturers assembly instructions must be followed in detail to ensure all the safety features of the
cot are not compromised.
Please ensure that the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Please keep medication, string, elastic,small toys or small items, such as money out of reach from any
position in the cot.
WARNING: TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 130mm.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
AS/NZS 2172:2003 Cots for household use - Safety Requirements
WARNING

SCREW KIT
Ф8*4*30mm
10
Ф16*28mm
Ф15.8*51.5mm
M4*10mm
M4*20mm
M6*40mm
Ф14.5*11.5mm
8
8

PARTS LIST
COT COMPONENTS
DRAWER COMPONENTS
FIXSIDE
DROPSIDE
BACK SIDE
FRONT SIDE
TTOB DRAOBMO
ROPPUSELDDIM T
SIDE BOARD
(LEFT)
SIDE BOARD
(RIGHT)
COT END
(RIGHT)
COT END
(LEFT)
COT
BASE

ASSEMBLY
Attach the ends to the base
Attach the fixed side
Please note: do not tighten
completely at this point
For newborn babies always place
the base in the highest position
until the child is able to sit up
unassisted. Once the child is able
to sit up unassisted use the lowest
level. (as shown in FIG1)
3
2
6
6
2
2
2
10
5
6
5
6
1
10

ASSEMBLY
Attaching the dropside
Please note: Tighten all screws
10
4
Inside

ASSEMBLY
DRAWER ASSEMBLY
2
4
123
2
9
9
99
9
9
8
8
8
8
4
2
2
9
8
7
7
77

ASSEMBLY
Slide the drawer on the rails under the base

ASSEMBLY
Remove the dropside from the cot leaving the fixed side attached.
Add the mattress and you can now use it as a Lounge(sofa)
CONVERTING COT TO LOUNGE (SOFA)