Lovibond Tintometer SensoDirect Salt110 User manual

GB
SensoDirect Salt110
Salt Meter - Instruction Manual
Lovibond®Water Testing
Tintometer®Group

2SensoDirect Salt110
Contents
1. General description
2. Specification
3. Functional description
4. Taking measurements
5. Calibration
6. Changing the battery
7. Accessories
1. General description
* General purpose salt meter with broad application including Swimming Pools,
Water Conditioning, Aquaria & Fish Hatcheries, Food & Beverage Processing,
Photography, Laboratory, Paper Industry, Plating Industry, Quality Control and
Education.
* High quality, compact unit with a separate electrode that is designed for easy
operation.
* Water resistant front panel with easy to read LCD display and rubberised function
keys
Unpacking
Please check that the shipment includes the following items:
• Lovibond®SensoDirect Salt110
• Lovibond®SensoDirect Salt Sensor
• 9V Battery
• Protective Cover
• 7 Screws
• Screwdriver
• Plastic Cover Calibration Screws
• Instruction Manual
Battery installation
Prior to first use take the instrument out of the protective cover open the battery
compartment and insert the 9V battery.
Ensure polarity is correct.
Protective Cover
The instrument is equipped as standard with the protective cover.
Prior to the first measurement please fix the cover by using the enclosed screws.
The protective cover ensures reliable operation even in harsh environments.

3
SensoDirect Salt110
When the instrument is used without the protective cover please use the enclosed
plastic cover to protect the calibration screws against dust and humidity.
2. Specification
Display LCD, 21.5 mm (0.7“) digit height
Maximum display count no. 10
Measurement Range 0 -10% salt (% weight)
Test values over 10% doesn‘t
confirm with the specifications
Over Range Display shows „1“
Resolution 0.01% salt
Accuracy (23 ± 5°C) ± 0.2% salt for 0 - 3 %
± 0.5% salt for 3 - 10 %
Sample Time Approx. 0.4 seconds
Data Hold Freezes the salt value on the display
Temperature Automatic, 0 - 50°C (32°F - 122°F)
Compensation
Operating Temperature 0 - 50°C (32°F - 122°F)
Operating Humidity Maximum 80% relative humidity
Power Supply 006P DC 9V battery (heavy-duty type),
MN1604 (PP3) or equivalent
Power Current Approx. DC 5 mA
Weight 380 g
Dimensions Meter: 208 x 110 x 34 mm (L x W x H)
Electrode: 22 mm diameter x 120 mm length
Instrument adjusted by the manufacturer.

4SensoDirect Salt110
3. Funktionsbeschreibung
Figure 1
1Display
2Power ON Button
3Power OFF Button
4Data Hold Button
5Salt probe input socket
6Calibration Screws
7Battery compartment/cover
8Stand
9Protective cover
10 Probe Handle
11 Salt Sensor
4. Taking measurements
1) Connect the Salt probe to the probe input socket (Figure 1, 5).
2) Power on the instrument by pressing the Power ON Button.
3) Hold the „Probe“ Handle by hand and immerse the Salt Sensor wholly into the
measured solution.
Shake the Probe several time to let the air bubble leave away from the Salt Sensor
until the reading value reach stable. Display will show the salt values (% weight)
as NaCl.
4) The Probe Head has build in a temperature sensor for the usage of automatic
Temp. compensation. If the temperature of measured salt solutions is chan
ged, then it should take few minutes to let the display reading reacht the
stable value.
5) Press the „Hold Button“ (Figure 1, 4) will hold the measured value and the LCD
will indicate a „Hold“ symbol on the display during the measurement. Press the
Hold Button again to exit the data hold function.

5
SensoDirect Salt110
5. Calibration
Figure 2
To calibrate the meter:
1) Prepare a 0.6% weight salt Solution (NaCl) 6000 mg/l (ppm).
For example: 1000g salt Solution contain 6g salt.
2) Hold the Probe Handle by hand and immerse the let the Probe
Head wholly into the measured solution
Shake the Probe several time to let the air bubble leave away
from the Probe Head until the reading value reach stable.
Calibrate the instrument with the calibration screws (Figure 2,
6)
until display show the value same as 0.60 exactly
3) Alternative Calibrations
Concentration 1000g salt solu- mg/l (ppm) Display
tion contains reading
3% 30 g Salt 30000 3.00
8% 80 g Salt 80000 8.00
rough adjustment
vernier adjustment

6SensoDirect Salt110
6. Changing the battery
Figure 3
1) „ “ in the left corner of the display indicates that it is necessary to replace the
battery. However, accurate measurements may still be made for several hours
after the “Low Battery” indicator first appears.
2) Remove the protective cover before replacing the battery. To replace the battery,
remove the Battery Compartment Cover (Figure 3, 7) on the rear of the meter.
3) Remove the battery, install a replacement one (006P DC 9V battery (heavy
duty type), MN1604 (PP3) or equivalent). Ensure Polarity is correct. Replace
the battery compartment cover.

7
SensoDirect Salt110
Bemerkungen

Technical changes without notice
Printed in Germany 03/15
No.: 00 38 61 47
Lovibond®and Tintometer®
are Trademarks of the
Tintometer Group of Companies
Tintometer India Pvt. Ltd.
B-91, A.P.I.E. Sanath Nagar,
Hyderabad, 500018
Tel: [phone]
Toll Free: 1 800 102 3891
indiaoffi[e-mail]
www.lovibondwater.in
India
Tintometer GmbH
Lovibond®Water Testing
Schleefstraße 8-12
44287 Dortmund
Tel.: [phone]
Fax: [phone]
[e-mail]
www.lovibond.com
Germany
Tintometer AG
Hauptstraße 2
5212 Hausen AG
Tel.: [phone]
Fax: [phone]
[e-mail]
www.tintometer.ch
Switzerland
The Tintometer Limited
Lovibond House / Solar Way
Solstice Park / Amesbury, SP4 7SZ
Tel.: [phone]
Fax: [phone]
[e-mail]
www.lovibond.com
UK
Tintometer South East Asia
Unit B-3-12, BBT One Boulevard,
Lebuh Nilam 2, Bandar Bukit Tinggi,
Klang, 41200, Selangor D.E
Tel.: [phone]
Fax: [phone]
[e-mail]
www.lovibond.com
Malaysia
Tintometer China
Room 1001, China Life Tower
16 Chaoyangmenwai Avenue,
Beijing, 100020
Tel.: [phone] App. 330
Fax: [phone]
China
Tintometer Inc
6456 Parkland Drive
Sarasota, FL 34243
Tel.: [phone]
[e-mail]
www.lovibond.us
USA
Tintometer Brazil
Caixa Postal: 271
CEP: 13201-970
Jundiaí – SP -
Tel.: [phone]
[e-mail]
www.lovibond.com.br
Brazil