LOXONE Touch & Grill Air User manual

Part No.: 100341
Need Help?
loxone.com
No Gimmicks.
Real Smart Homes.
Touch &
Grill Air
Technical Specifications
Power Supply 5VDC (LPS) via Micro USB or
integrated Li-Ion Battery
Power Consumption typ. 150mW, max. 4W
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com/support
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
Part No.: 100341
Maintenance & Cleaning This device is free of mainte-
nance and may only be clea-
ned with a dry or damp cloth.
See additional Information
for the Li-Ion battery.
Safety Rating IP20
Ambient Temperature 0..40°C / 32..104°F
Input 7 Capacitive Touch Points
2 Temperature Sensors
Probes with a Temp. Range
of -15...300°C
Humidity 95% r. H. (non condensing)
Radio Frequency 868MHz (SRD Band Europe),
915MHz (ISM Band Region 2)
max. Power 3.16mW
Dimensions 120x120x75mm /
4.72x4.72x2.95” (LxWxH)
Cable length Temperature
sensor
1500mm / 59.1"

About the product
The Touch & Grill Air is the ideal companion for your next
barbecue. Connect the two temperature sensors to the device
to monitor the temperature of your meat or grill; and control
your lights, blinds and music with the integrated Loxone
Standard T5 touch points.
Features
• 2 connectable temperature sensors
• Visual display for temperature & time
• 5 control touch points & 2 function touch points
• Timer functionality
• Integrated alarm
•Li-Ion Battery
Installation
The device will enter learn-in mode by default when first set up,
but this device can be used as a standalone device too.
• If you want to connect the device to the Miniserver after
standalone use, first connect it the power supply. Once de-
vice has powered on, hold the lower middle touch point (T7)
for at least 5 seconds (this should be done within 10 seconds
of powering on the device). The upper LED indicator will
signal that the device is now in learn-in mode. You can now
do a search for the device and add it to the Miniserver.
• A short press of the upper middle touch point (T6) allows
you to switch between the temperature sensors, the timer
and the time. The colour of the LED indicates which sensor
is currently selected.
For additional information, declaration of confirmity,
visit www.loxone.com/help/touchandgrill
• A short press of T7 will start the timer. Press and hold T7
for 3 seconds to deactivate a timer or set a new timer. The
display will flash if the new timer function is activate. Use
the left and right corner touch points to adjust the hours
and minutes. Tap the T7 touch point once again to confirm.
•To turn on the device, press and hold T6 for 3 seconds, or
plug in the Micro USB (when the device is off).
• To turn it off, press and hold T6 for 3 seconds.
Safety Information
Read all safety information before using the device to ensure
safe and proper use.
Follow the warning information provided below
to prevent incidents such as fire or explosion
• Do not expose the device to physical impact or damage.
• Use only manufacturer-approved chargers, accessories and
power supplies.
• Prevent the jacks from coming into contact with conductive
elements, such as metal or liquids.
• If any part of the device is cracked or broken, stop using the
device immediately and get in contact with Loxone.
• To prevent damage avoid direct sunlight.
• Before storing the product make sure that the battery is fully
charged.
• Allow for a complete charge cycle of the Li-Ion battery
every 6 months.
Follow the warning information provided below
to prevent injury to people or damage to the
device
• Keep out of reach of children and animals.
• Take note of the ambient and storage temperatures. Using
or storing the device outside the recommended temperature
ranges may damage the device or reduce the battery’s
lifespan.
• Do not use the device itself in a hot environment or near
fire.
• The temperature sensors will get hot during use.
• Only use the temperature sensors to measure the tempera-
ture of meat or the interior temperature of a barbecue.
• Prevent any electrical conduction to the temperature
sensors.
1
4
2
6
3
5
7
Toggle Display /
Switch Off Device /
Set Time
Music On /
Volume Up /
Set Minutes
Lights On /
Change Mood
Set Timer /
Learn-in Mode
Micro USB
Yellow Sensor
Green Sensor
1 x yellow
1 x green
This folder is a part of the product!
Blinds Up /
Set hours
Blinds Down /
Set hours
Music Off /
Volume Down /
Set Minutes