
3
Description
8 levels speed adjustment,
Sequence
1
2
3
4
5
6
7
8
Modes
3 channel color skipping
Static brightness 1
Static brightness 2
Static brightness 3
Static brightness 4
Static brightness 5
Color strobe
5. Tables of changing modes
0% brightness,support BRT adjustment
25% brightness,support BRT adjustment
50% brightness,support BRT adjustment
75% brightness,support BRT adjustment
100% brightness,support BRT adjustment
8 levels speed adjustment,
8 levels speed adjustment,
Gradual dark and
gradual bright
6. Conjunction sketch map
Connected to LED RGB module:
HH
H H HH
DC12V
DC12V
LN
AC DC
AC220V 110V
POWER
S UPPLY
LED MO DULELED MO DULE
LED MO DULELED MO DULE
LED MO DULELED MO DULE
LED MO DULELED MO DULE
LED MO DULELED MO DULE
LED MO DULELED MO DULE
4
7. Conjunction diagram, working with Power Amplifier
(Connected to LED module as an example)
HH
H H
HH
HH H
H
H H HH
H H HH
H H
LN
AC DC
AC220 V 110V
POW ER
S U PPLY
DC12V
POWER O UTPUT
INPUT
SIGNA L
MODEL : LT-3060
DC5V-D C24V
LED CON TROLLE R
5A×3CH
POWER R EPEATER
DC12 V
LN
AC DC
AC220 V 110V
POW ER
S U PPLY
DC12V
H H HH
H H HH
H H
LN
AC DC
AC220 V 110V
POW ER
S U PPLY
DC12V
in-phase cable
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
LED MODULELED MODULE
POWER OUTPU T
INPUT
SIGNA L
MODEL : LT-3060
DC5V-D C24V
LED CON TROLLE R
5A×3CH
POWER R EPEATER
8. Attention
9. Warranty Agreement
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please
ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector to avoid the accidents due to overheat and
poor contact on the wire.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
1. We provide lifelong technical assistance with this product:
A 3 year warranty is given from the date of purchase. The warranty is for free repair or replacement and covers
manufacturing faults only.
For faults beyond the 3 year warranty we reserve the right to charge for time and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Ltech shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in writing by Ltech only.
★ This manual only applies to this model. Ltech reserves the right to make changes without prior notice.
LT-311RF LED Dim Controller ManualLT-311RF LED Dim Controller Manual
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM
LT@LTECHONLINE.COM
Tel: +86 756 620 8823 Fax: +86 756 620 8833
LTECH LTECH