Ltech EBOX-AD User manual

Wireless Module
Model: EBOX-AD
EBOX-AD Wireless Module EBOX-AD Wireless Module
1
warranty
5 years
System Diagram
Internet
WiFi WiFi RF
WiFi
3G/4G
APP
Wireless knob panel
(TD/AD/DMX)
Wireless driver
Wireless driver
Wireless driver
EX series panel
EXC series panel
Wireless
LED
controller
Remote
Cloud service
Smart gateway
Human
sensor
Scene
panel
RF relay
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
Wireless driver
E series panel
Triac LED driver
0-10V LED driver
DMX LED driver
RF to DMX
Wireless
Module
RF 0-10V to
RF to phase-cut
Wireless connection
Wired connection
Router
Amazon ECHO
(programmable)

2
5~24Vdc
0-
RF 2.4GHz
-30°C~55°C
10V
Input Voltage:
Output:
Wireless Signal:
Working Temp.:
EBOX-AD Wireless Module
Unit: mm
EBOX-AD wireless module applies to L-BUS wireless communication protocol and converts
into 0-10V signal through RF wireless communication technology, which is used with LTECH
0-10V LED driver and compatible with all 0-10V series products on the market. Relying on
L-BUS wireless technology, removing complex layout and expensive technical cost, making
new or retrofit projects installation easier.
50
55
Technical Specs
Product Size
Product Introduce
EBOX-AD Wireless Module
L55×W55×H21(mm)
L65×W65×H26(mm)
70g
Dimensions:
Package Size:
Weight(G.W.):
www.ltech-led.com
21
3
EBOX-AD Wireless Module
N N N
L L
LED+ LED+ LED+ LED- LED- LED-
-
+
0-10V driver 0-10V driver 0-10V driver
+ + +
- - -
0-10V signal
ID learning
button
Long press “ID learning button” on EBOX-AD for 6 seconds,
the lamps flicker 5 times, clear code successfully.
DC-
DC+
N
L
L
5-24Vdc
100-240Vac
Power
input
ID learning
button
Wiring Diagram
Clear Code:

45 Update Time: 2019.08.27_A4
www.ltech-led.com
EBOX-AD Wireless Module EBOX-AD Wireless Module
The lamps of EBOX-AD flicker quickly and then stop flicking, match code successfully.
Match Code (power on method):
Step 1:
Step 2:
Step 3:
EBOX-AD power off .
Match code with F1/F5 remote: Match code with RC4-RF-B remote:
Match code with gateway:
Match code with EX1/EX5 panel:
Please do it when panel is power-on.
*
Hold down On/Off key on F1,
or hold down the matching zone’s
On & Off keys on F5 simultaneously,
meanwhile EBOX-AD power on.
Hold down the matching zone’s
On key of RC4-RF-B , meanwhile
EBOX-AD power on.
A. Long press “On/Off” key on the
panel until all indicator light
flicking.
B. EBOX-AD power on, the lamps
flicker slowly, please complete
step C within 15s
C. Press any key on EX1 panel
(or the matching zone key on EX5).
The lamps of EBOX-AD flicker quickly and then stop flicking, match code successfully.
ID learning
button
Match Code (ID learning button method)
Step 1:
Step 2:
Step 3:
Short press “ID learning button” on EBOX-AD, the lamps flicker, please
complete step 2 within 15 seconds.
Match code with F1/F5 remote:
Long press “On/Off” key on F1, or
Long press the matching zone’s
ON &OFF keys on F5 simultaneously.
Match code with RC4-RF-B remote:
Match code with gateway:
Match code with EX1/EX5 panel:
Please do it when panel is power-on.
*
Long press the matching “On” key
on RC4-RF-B.
Turn on APP, enter “zone set”
interface, click the right top
“MATCH” key, then follow the
prompts.
Turn on APP, enter “zone set”
interface, click the right top
“MATCH” key, then follow the
prompts.
Long press “On/Off” key on the
panel, then press any key on
EX1 panel (or the matching
zone key on EX5).
No further notice if any changes in the manual.
Product function depends on the goods.
Please feel free to contact our official distributor if any question.
night
AC
B
14
3
2
night
AC
B
14
3
2