4
�
Address setting: press X button to power on CHANNEL indicator, then keep
pressing X button to transform the indicator from the status of power on to
flashing. Press ▼or ▲to adjust the address (1-512), after the adjustment, press
X button once more, the indicator stops flashing, the address is saved
successfully.
�
Brightness adjusting by manual: Press X button to lightening the DIMMER
indicator, press ▼or ▲to adjust the brightness (0-255). After the adjustment,
keep pressing X button until the indicator flashing, the brightness data is saved
successfully. As the fixture powers off or shut down, the brightness of the
restarted fixture could be recovered to the last status.
�
�
�
�
Fast adjustment: keep pressing .
�
�
�
�
Normal adjustment: one touch.
IV.
IV.
IV.
IV.
Notes
Notes
Notes
Notes
1. The operation environment of the fixture should be water-proof, no-gas and
in-door.
2. The fixture is specific professional fixtures for stage lighting only.
3. Once there is external cable or wire in damage, please contact the
manufacturer or the A/S agency to make the maintenance to avoid the
danger.
4. The minimal limited distance between the fixture and inflammable materials
is 0.5 meter.
5. The external cable is 3P: L-red; N-blue; Ground-yellow & green.
V.
V.
V.
V.
Warning
Warning
Warning
Warning
★As the softlight is in visible damages, such as crack or gash, the user shall replace
it by the spare part timely.
★The replacement of LED module shall be operated by the professionals.
