Lucent Technologies GX 550 ES Manual

Beta Draft Confidential
Beta Draft Confidential
GX 550 ES
Hardware Installation Guide
Product Code: 80149
Revision 02
April 2003
Ex. 2006
000001

ii4/5/03 GX 550 ES Hardware Installation Guide
Copyright© 2003 Lucent Technologies. All Rights Reserved.
This material is protected by the copyright laws of the United States and other
countries. It may not be reproduced, distributed, or altered in any fashion by any entity
(either internal or external to Lucent Technologies), except in accordance with
applicable agreements, contracts or licensing, without the express written consent of
Lucent Technologies.
For permission to reproduce or distribute, please contact: Technical Publications,
Integrated Network Solutions/Core Switching Division at 978-692-2600.
Notice. Every effort was made to ensure that the information in this document was
complete and accurate at the time of printing. However, information is subject to
change.
Interference Information: Part 15 of FCC Rules. This equipment has been
tested and found to comply with the limits.
Trademarks. NavisXtend and NavisCore are trademarks of Lucent Technologies.
IP Navigator, Navis, CBX 500, GX 550, and B-STDX 9000 are registered trademarks
of Lucent Technologies. Other trademarks and trade names mentioned in this
document belong to their respective owners.
Limited Warranty. Lucent Technologies provides a limited warranty to this
product. For more information, see the hardware license agreement in this document.
Ordering Information. To order copies of this document, contact your Lucent
Technologies account representative.
Support Telephone Numbers. For technical support and other services, see the
customer support contact information in the “About This Guide” section of this
document.
Ex. 2006
000002

GX 550 ES Hardware Installation Guide 4/5/03iii
Beta Draft Confidential
LUCENT TECHNOLOGIES LIMITED WARRANTY ON HARDWARE
Lucent Technologies warrants the GX 550 ES against defects in materials and
workmanship for a period of one year from the date of shipment. During the warranty
period, Lucent will, at its option, repair, replace, or refund the purchase price of any
defective product at no additional cost, provided you return it during the warranty
period, transportation charges prepaid, to Lucent. You must attach your name, address
and telephone number, a description of the problem(s), and a dated proof-of-purchase
bearing the serial number of each product returned for warranty service.
This warranty is limited to the original purchaser of the product and is not transferable
unless otherwise agreed by Lucent in writing. This warranty does not apply if the
product: has been damaged by accident, abuse, misuse or misapplication; has been
modified without written permission by Lucent; or if any Lucent serial number has
been removed or defaced.
UNDER NO CIRCUMSTANCES SHALL LUCENT’S LIABILITY ARISING OUT OF OR IN
CONNECTION WITH THE PRODUCT OR THE USE OF, OR INABILITY TO USE, THE PRODUCT
IN TORT (INCLUDING NEGLIGENCE), OR OTHERWISE, EXCEED THE PURCHASE PRICE OF
THE PRODUCT. LUCENT MAKES NO WARRANTY OR REPRESENTATIONS, EITHER
EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCT, ITS QUALITY,
PERFORMANCE, MERCHANTABILITY, OR FITNESS IN A PARTICULAR PURPOSE.
ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE
OF ORIGINAL PURCHASE OF THE PRODUCT.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHERS, ORAL OR WRITTEN, EXPRESSED OR IMPLIED. No Lucent dealer, agent, or
employee is authorized to make any modification, extension, or addition to this
warranty.
LUCENT IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY LEGAL
THEORY, INCLUDING LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR
REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COST OF RECOVERING,
REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED
WITH LUCENT’S PRODUCTS.
Some states do not allow the exclusion of implied warranties or liability for incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Ex. 2006
000003

iv4/5/03 GX 550 ES Hardware Installation Guide
Beta Draft Confidential
LUCENT TECHNOLOGIES LIMITED WARRANTY ON MEDIA AND
DOCUMENTATION
Lucent Technologies also warrants that the media on which the Software is distributed
and the Documentation are free from defects in materials and workmanship. Lucent
will replace defective media or documentation, provided you return the item with
dated proof of purchase to Lucent within 90 days of the date of delivery.
FEDERAL COMMUNICATIONS COMMISSION WARNING
This device complies with Part 15 of the FCC Rules and Regulations. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and
This device must withstand any interference received, including interference that may
cause undesired operation.
TheGX550EShasbeentestedandfoundtocomplywiththelimitsforaClassA
digital device pursuant to Part 15 of the FCC Rules and Regulations. These limits are
designed to provide reasonable protection against harmful interference when this
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio-frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio and television
communications. Operation of this equipment in a residential area is likely to cause
interference in which case the user will be required to correct the interference at his or
her own expense.
Shielded cables must be used with this unit to ensure compliance with the FCC Class
Alimits.
Do not attempt to repair or modify this equipment. Any repairs to the unit must be
performed by Lucent Technologies or a Lucent-authorized representative.
Ex. 2006
000004

GX 550 ES Hardware Installation Guide 4/5/03v
Beta Draft Confidential
Maintenance Agreements
Lucent offers a comprehensive program to provide hardware support, a 24-hour
emergency hotline, overnight parts replacement, and an escalation procedure.
Non-contract maintenance services are provided at current time-and-materials rates.
For more information, contact Lucent Technical Assistance Center (TAC) at
1-866-LUCENT8 (in the U.S.). For international telephone numbers see “Technical
Support” in “About This Guide.”
Lucent has adopted a maintenance strategy based on customer-initiated requests to the
Lucent TAC. The TAC coordinates all customer services, including hardware and
software technical support, on-site service requirements, and module exchange and
repair.
If the Product Is Damaged
If any portion of the switch is damaged, forward an immediate request to the delivering
carrier to perform an inspection of the product and to prepare a damage report. Save
the container and all packing materials until the contents are verified.
Concurrently, report the nature and extent of the damage to the Lucent TAC so that
action can be initiated, either to repair or replace the damaged items.
Do not return any items to Lucent until you obtain instructions from a TAC
representative. Report the problem or deficiency to the TAC representative, along
with the model, type, and serial number. Upon receipt of this information, Lucent will
provide you with service instructions, or a Return Authorization Number and shipping
information. All items returned under warranty must be shipped to the manufacturer
with the charges prepaid.
Ex. 2006
000005

vi4/5/03 GX 550 ES Hardware Installation Guide
Beta Draft Confidential
If Problems Arise
If any of your telephone equipment is not operating properly, you should immediately
remove it from your telephone line, as it may cause harm to the telephone network. If
the telephone company notes a problem, they may temporarily discontinue service.
When practical, they notify you in advance of this disconnection. If advance notice is
not feasible, you will be notified as soon as possible. When you are notified, you will
be given the opportunity to correct the problem and informed of your right to file a
complaint with the FCC.
In the event that repairs are ever needed on this equipment, they should be performed
by Lucent Technologies or an authorized Lucent representative. For information
contact the Lucent TAC at 1-866-LUCENT8 (in the U.S.). For international telephone
numbers see “Technical Support” in “About This Guide.”
Ex. 2006
000006

GX 550 ES Hardware Installation Guide vii
Beta Draft Confidential
Contents
Maintenance Agreements..............................................................................................v
If the Product Is Damaged.............................................................................................v
If Problems Arise...................................................................................................vi
About This Guide
What You Need to Know..........................................................................................xvii
Reading Path ............................................................................................................xviii
How to Use This Guide..............................................................................................xix
What’s New in This Guide?........................................................................................xx
Conventions................................................................................................................xxi
Related Documents ...................................................................................................xxii
Lucent .................................................................................................................xxii
Ordering Printed Manuals Online ............................................................................xxiii
Customer Comments................................................................................................xxiii
Technical Support ....................................................................................................xxiii
Chapter 1 Overview
GX 550 ES Product Description ................................................................................1-1
GX 550 ES Extender Features ...................................................................................1-3
Hardware Module Overview......................................................................................1-4
Module Locations.......................................................................................................1-5
Module Descriptions ..................................................................................................1-8
Uplink Module.....................................................................................................1-8
Number of Supported Modules.....................................................................1-8
Redundancy Capabilities...............................................................................1-8
Automatic Protection Switching Support .....................................................1-9
Ex. 2006
000007

viii4/5/03 GX 550 ES Hardware Installation Guide
Contents
Uplink Phy Module ............................................................................................. 1-9
Number of Supported Modules .................................................................... 1-9
Redundancy Capabilities ............................................................................ 1-10
DS3 Transport Module ............................................................................................ 1-11
DS3 ATM/CE Transport Module...................................................................... 1-11
Number of Supported Modules .................................................................. 1-11
Redundancy Capabilities ............................................................................ 1-12
Interface to the Uplink Module .................................................................. 1-12
Supported Features ..................................................................................... 1-12
Unsupported Features/Interoperability ....................................................... 1-13
DS3 Phy Module ............................................................................................... 1-14
Number of Supported Modules .................................................................. 1-14
Redundancy Capabilities ............................................................................ 1-14
Redundant DS3 Phy Module............................................................................. 1-14
Number of Modules.................................................................................... 1-15
GX 550 ES Downlink Phy Module...................................................................1-15
Number of Modules.................................................................................... 1-15
Interfaces with Other Modules ................................................................... 1-15
Chapter 2 Specifications and Safety Warnings
Electronic/Electrical Requirements ........................................................................... 2-1
Power Specifications........................................................................................... 2-2
Wiring Size.......................................................................................................... 2-2
Transient Power Protection for DC Power Sources............................................ 2-2
Converting AC Power Sources ........................................................................... 2-3
AC-to-DC Rectifier Features........................................................................ 2-3
Ordering an AC-to-DC Rectifier Unit .......................................................... 2-3
DC Input Power Protection Unit (DCPPU) ........................................................ 2-4
DCPPU Features........................................................................................... 2-4
Space Requirements ..................................................................................... 2-5
Ordering a DCPPU ....................................................................................... 2-5
Physical Specifications .............................................................................................. 2-6
Site Specifications ..................................................................................................... 2-7
Operating Environment....................................................................................... 2-7
Space Requirements ............................................................................................ 2-7
DC Power Supply Warnings...................................................................................... 2-8
Ex. 2006
000008

Beta Draft Confidential
GX 550 ES Hardware Installation Guide 4/5/03ix
Contents
Safety Warnings .........................................................................................................2-8
Signes Précurseurs de Sécurité...................................................................................2-8
Achtung: Zusätzliche Sicherheitshinweise ................................................................2-9
Chapter 3 Preparing for the Installation
Selecting the Installation Site.....................................................................................3-1
Checking the GX 550 ES Extender for Damage........................................................3-2
Moving the GX 550 ES to the Installation Site..........................................................3-3
Unpacking the GX 550 ES Extender .........................................................................3-3
Unpacking the Accessory Kit.....................................................................................3-4
Verifying the Hardware Configuration ......................................................................3-5
Before Handling Equipment................................................................................3-5
Checking the Front-accessed Modules ................................................................3-6
Checking the Rear-accessed Modules .................................................................3-8
Checking the Fan Tray ......................................................................................3-10
What’s Next?............................................................................................................3-12
Chapter 4 Installing the GX 550 ES Extender
Before You Begin ......................................................................................................4-1
Required Installation Tools and Equipment...............................................................4-2
Rack-mounting the GX 550 ES Extender ..................................................................4-3
Methods for Rack-mounting the GX 550 ES Extender.......................................4-3
Flush-mount Installation in a 19-inch Equipment Rack ...............................4-4
Flush-mount Installation in a 23-inch Equipment Rack ...............................4-6
Mid-mount Installation in a 19-inch or 23-inch Equipment Rack................4-9
Connecting Cables to the GX 550 ES Extender.......................................................4-13
GX 550 Multiservice WAN Switch Connection ...............................................4-13
Data Connections...............................................................................................4-15
Viewing the GX 550 ES Extender with the NMS....................................................4-17
What’s Next?............................................................................................................4-17
Chapter 5 Powering Up the GX 550 ES
Before You Begin ......................................................................................................5-1
Powering Up Overview..............................................................................................5-2
Determining the Power Connection Method..............................................................5-3
Obtaining Required Tools and Materials.............................................................5-4
Connecting Power Cables to the GX 550 ES ......................................................5-4
Ex. 2006
000009

x4/5/03 GX 550 ES Hardware Installation Guide
Contents
Applying Power to the GX 550 ES............................................................................ 5-7
What’s Next? ............................................................................................................. 5-8
Chapter 6 Determining the Operating Status
Module Status and Port Status LEDs......................................................................... 6-1
Viewing LEDs..................................................................................................... 6-1
Uplink Module LEDs ................................................................................................ 6-2
Uplink Phy Module LEDs ......................................................................................... 6-4
DS3 ATM/CE Transport Module LEDs.................................................................... 6-6
Module Status LEDs ........................................................................................... 6-7
Port Alarm LEDs................................................................................................. 6-8
Port Alarm Conditions.................................................................................. 6-9
DS3 Phy Module LEDs ........................................................................................... 6-10
Redundant DS3 Phy Module LEDs ......................................................................... 6-11
GX 550 ES Downlink Phy Module LEDs...............................................................6-12
Fan Tray Module LED............................................................................................. 6-13
Chapter 7 Removing and Installing Components
Removal and Installation Precautions ....................................................................... 7-2
Parts Repair ......................................................................................................... 7-2
Static Protection .................................................................................................. 7-2
Electrical Energy Hazard .................................................................................... 7-2
Module Removal Procedures..................................................................................... 7-3
Module Installation Procedures ................................................................................. 7-6
GX 550 ES Downlink Phy Module .........................................................................7-12
Removing the Downlink Phy Module...............................................................7-12
Installing the Downlink Phy Module ................................................................ 7-15
Before You Begin ....................................................................................... 7-15
Restrictions on Slot 12D............................................................................. 7-15
Installation Steps......................................................................................... 7-16
GX 550 ES Fan Tray or Fan Tray Air Filter ........................................................... 7-20
Running the GX 550 ES Extender and Replacing Fan Trays ...........................7-20
Removing the Fan Tray..................................................................................... 7-20
Installing the Fan Tray .....................................................................................7-23
Removing the Air Filter .................................................................................... 7-25
Installing the Air Filter...................................................................................... 7-26
Ex. 2006
000010