Lutron Electronics Hi-Lume Premier 0.1% User manual

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 1 04.19.17
The Hi-lume Premier 0.1% Constant Voltage Driver
(L3D0) is a high-performance LED driver capable of
controlling up to 96 W of 24 V- constant voltage
loads. This driver provides smooth and continuous
dimming down to 0.1% low-end. It is ideal for use with
strip lighting in applications such as coves, under or
over cabinet lighting and pathway lighting. The driver is
UL®Listed with an integrated wiring compartment and
can be mounted up to 150 ft (45 m) away from the
load.
Features
•Continuous,icker-freedimmingfrom100%to0.1%
1.
•Soft-on,Fade-to-Black operationforEcoSystem
controls: fades smoothly between 0% and 0.1% when
turnedonandoffforanincandescentlikeexperience.
2
•PWMdimmingmeetsIEEE1789overtheentire
dimming range.
•UL®ListedforUnitedStatesandCanada(cULus®).
•NOMcertiedforMexico.
•FieldAdjustmentKnobofferscustomerlow-endlight
outputtuningforbetterxture-to-xturematching.
•Guaranteeddimmingperformancewhenusedwith
Lutron controls:
 –HomeWorksQS,EnergiSavrNodeunitswith
EcoSystem controls,GRAFIKEyeQSwith
EcoSystem controls,PowPakwithEcoSystem
dimmingmodules,PowPakwithEcoSystem wireless
xturecontrols,andQuantumsystems,allowingfor
integrationintoaplannedorexistingEcoSystem
lighting control solution.
– Lutron 3-wire controls and interfaces.
•Protectedfrommiswiresofinputpower,upto277V~,
toEcoSystemcontrolinputs...
•Ratedlifetimeof50,000hoursat40°C(104°F)
ambienttemperatureandmaximumloading.
•FCCPart15compliantforcommercialapplicationsat
120 –277 V ~ and residential applications at 120 V ~.
•Inrushlimitingallowsfullloadingofcircuitbreakers
without nuisance tripping.
1 Lightoutputat0.1%dependsoninstallationandlightengineefcacy.
2 Soft-on,Fade-to-Blackdimmingtechnologyisnotavailablefor3-wirecontrols.
Hi-lume Premier 0.1% EcoSystem / 3-wire
Constant Voltage 24 V-LED Driver with
Soft-on, Fade-to-Black
•100%end-of-lineperformancetestedataLutron
factory.
•RoHScompliant.
•Restoresallsettingsafterpowerfailure.
•BarrierprovidedforClass2separationinthewiring
compartment.
•Redundantconnectionsonlineandcontrolterminals
for easy daisy chain wiring.
•Redundantconnectionsonoutputterminalsallowfor
easy wiring of two LED load home runs.
•Class2outputdesignedtowithstandhotswap.
•Formoreinformationpleasevisit:www.lutron.com
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
5.5in(140mm)Wx2.0in(51mm)Hx10.5in(267mm)L
lutron.com
1

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 2 04.19.17
Specifications
Regulatory Approvals and Compliance
•LutronQualitySystemsregisteredtoISO9001.2008
•ManufacturingfacilitiesemployESDreduction
practices that comply with the requirements of
ANSI/ESDS20.20
•MeetsANSIC62.41categoryAsurgeprotection
standardsuptoandincluding4kV
•FCCPart15compliantforcommercialapplicationsat
120 V~ to 277 V~ and residential applications at 120 V~
•MeetsUL®8750/CSAC22.2No.250.13-14,“LightEmitting
Diode(LED)EquipmentForUseinLightingProducts”
•NOMcertied
• Class 2 output; meets UL ® 1310/CSAC22.2No.223-M91
Performance
•DimmingRange:100%to0.1%
1
•LEDlightingturnsontoanydimmedlevelwithout
ashingtofullbrightness
•OperatingVoltage:120V~to 277 V~at50/60Hz
•Ratedlifetimeof50,000hoursat40°C(104°F)
ambienttemperatureandmaximumloading
•Forratedwarranty,ambienttemperature(ta) not to
exceed40°C (104°F)(maximumratedtemperature)
2, 3
•Patentedthermalfoldbackprotection
•Non-volatilememoryrestoresalldriversettingsafter
power failure
•Typicalstandbypowerconsumption:0.25Wat
120 V~and 0.4 W at 277 V~
•Open-circuitprotectedoutput
•Short-circuitandoverload-protectedoutput
•Output:24V-constant voltage at high-end
•OutputLoadRange:2Wto96Wathigh-end
•PWMdimmingfrequency:meetsIEEE1789atall
dim levels
•PowerFactor:>0.90atmaximumpower
•TotalHarmonicDistortion(THD):<20%at
maximumpower
Performance (continued)
•NEMA410–2011compliant
•InrushCurrentLimitingCircuitry:decreasescircuit
breakertripping,switcharcingandrelayfailure;allows
full loading of switch leg
•InrushCurrent:<2A
•Deviceturn-ontime:<100msfromelectronicoffand,
<500msfrompoweroff
•Meetsall"SolidStateElectricalPerformance
Requirements"(Section11)inEnergyStar®for
Luminaires Version 2.0
•L3D0-96W24V-UdriverisprogrammedbyLutron
manufacturingandisNOTcongurablebytheLutron
QwikFigcongurationsystem
Environmental
•Soundrated:ClassAinaudiblein24dBAambient
•RelativeHumidity:maximum90%non-condensing
• MinimumOperatingAmbientTemperature:ta=0°C(32°F)
3
•Indooruseonly
•Ratedfordryanddamplocations
•MeetsNEC®requirementsforinstallationin“other
spaceusedforenvironmentalair”
4
•MeetstheCanadianNationalBuildingCodePlenum
Requirementsforaconcealedspaceusedasa
plenumwithinaoororroofassembly
•Maximumheatoutputofmodule:46BTU/hour
1 Lightoutputat0.1%dependsoninstallationandlightengineefcacy.
2 Tomaintainwarranty,installerisresponsibleforensuringthatthedriverambienttemperaturedoesnotexceed40ºC(104ºF).
3Where tais the temperature of the air directly surrounding the driver.
4 Additionalconsiderationsmayberequiredbasedonstateandlocalcodesandstandards.
2

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 3 04.19.17
Specifications (continued)
Driver Wiring and Mounting
 Forbestinstallationpractices,pleasereferto
ApplicationNote#591atwww.lutron.com.
•Mountthedriverinapositionwhereitcanbeeasily
located and accessed if service or troubleshooting is
necessary.
•Driverisgroundedbyterminalconnection
• Terminalblocksonthedriveracceptsolidorstranded
wireperterminalfrom20AWGto12AWG(0.50mm2to
2.5 mm2).
•MaximumwirelengthbetweentheLEDdriverandthe
startofthelinearstripfordifferentwiresizesislisted
below. The table below can be used independently of
the line voltage that is powering the LED Driver.
Wire Gauge Maximum Lead Length
24AWG(0.20mm2)* 6 ft (1.8 m)
22AWG(0.34mm2)* 10 ft (3.0 m)
20AWG(0.50mm2) 15 ft (4.5 m)
18AWG(0.75mm2) 25 ft (7.62 m)
16AWG(1.0mm2) 40 ft (12.2 m)
14AWG(1.5mm2) 60 ft (18.3 m)
12AWG(2.5mm2) 100 ft (30.5 m)
10AWG(4.0mm2)* 150 ft (45.7 m)
* Tousewiregaugelargerorsmallerthanterminalblocks’ratedgaugeof
20AWGto12AWG(0.50mm2to 2.5 mm2), connect 1 ft (0.3 m) or less of
rated wire from terminal and connect with larger or smaller wire.
TerminalBlockDetails
LED
(-) LED
(+) E1/
DA1 E2/
DA2 LDH ND
3

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 4 04.19.17
Models Available
Model
Input
Voltage
(V~)
Input
Current1
(A)
Typical
Power
Factor1
Typical
THD1
(%)
Output
Power
(W)
Output
Voltage1
(V-)
3-Wire or
EcoSystem
Control
2
For 24 V-
Constant Voltage
LED Loads
L3D0-96W24V-U
120 0.92 0.99 82 – 96 24
277 0.40 0.94 13 2 – 96 24
1 Atmaximumoutputpower.
2 Forwiringoptions,seeWiring section, pages 9-11.
NOTE:Specicationsaresubjecttochangewithoutnotice.
Output Voltage vs. Output Power
Output Power (W)
Output Power (W)Output Power (W)
Output Voltage (V) THD
Efficiency
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
23.0
22.5
22.0
21.5
21.0
20.5
20.0
23.5
24.0
24.5
25.0
25.5
26.0
120 V~Key: 277 V~
120 V~Key: 277 V~120 V~Key: 277 V~
THD vs. Output PowerEfficiency vs. Output Power
10%
5%
0%
15%
20%
25%
30%
010 20 30 40 50 60 70 80 90 100
60
50
40
30
70
80
90
100
Output Power (W)
Power Factor
120 V~Key: 277 V~
Power Factor vs. Output Power
010 20 30 40 50 60 70 80 90 100
0.60
0.50
0.40
0.30
0.70
0.80
0.90
1.00
Shadedareameetstheperformancecriteriaofthe
ENERGYSTARRLuminairesV2.0Specification
4

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 5 04.19.17
50016452a
lutron.com
0784276 166027
120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Soft-on, Fade-to-Black
TM
EcoSystem
TM
3-wire Constant Voltage LED Driver
LED Driver 4RM5
L3D0-96W24V-U
Allumage doux, fondu au noir
EcoSystem
TM
Pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
Output | Sortie:
24 V 4 A Max Class 2
B2
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Hi-lume
®
Premier 0.1%
Suitable for damp locations.
Convient aux emplacements humides.
Use 20 - 12 AWG wire only.
Utiliser un fil de 0,50 - 2,5 mm² seulement.
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT :
Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Pats | Brevets: 7,911,156
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle: 8-32 x 3/8” roulage de filets, dentelées
1/4 in (6,5 mm)
Cu Al
Enclosure Dimensions
Measurementsareshownas:in(mm)
Knockouts
•Sides
–4locations:1/2inor21mmtradesize
• Top
–2locations:1/2inor21mmtradesize
10.5 (267)
2.0 (51)
5.5 (140)
5

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 6 04.19.17
Mounting Options
1,2
1 Anyothermountingcongurationwillrequireadditionalmechanicalsupport.Improperinstallationmayresultinhazardstopersonnelorproperty.
2 Mountthedriverinapositionwhereitcanbeeasilylocatedandaccessedifserviceortroubleshootingisnecessary.
Mounting Surface
6

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 7 04.19.17
Barrier Installation and Driver Spacing Requirements
Measurementsareshownas:in(mm)
• Optionalbarriercanbeplacedeither
betweentheinputandEcoSystemcontrol
terminals (Option 1)whentheEcoSystem
linksarewiredasClass2orbetweenthe
EcoSystemcontrolandoutputterminals
(Option 2)whentheEcoSystemlinksare
wired as Class 1.
• For3-wirecontrol,barriercouldbeplacedin
either location.
• TheEcoSystemdigitallinkmaybewired
as Class 1 or Class 2. Please refer to
ApplicationNote#142atwww.lutron.com.
• Maintainaminimumof3.0in(76mm)between
any two Hi-lume Premier 0.1% drivers.
Option 1 Option 2
3.375 (86)
≥ 3.0 (76)
Barrier
≥ 3.0 (76)
Barrier
Barrier
Output EcoSystem
Control
Input Output Input
Output Input
EcoSystem
Control
EcoSystem
Control
7

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 8 04.19.17
Control Mounting Options (continued)
APowPakWirelessFixtureControlcanbemountedonthedriverusingthedriver'savailableknockouts.Additional
considerations may be required based on state and local codes and standards.
Suitable for damp locations.
Convient aux emplacements humides.
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Pats. | Brevets: 7,911,156
L3D0-96W24V-U
4 A Max Class 2
Output | Sortie:
24 V-
0,92 - 0,40 A
Input | Entrée:
110 W Max50 / 60 Hz
120 - 277 V~
50016452a
lutron.com
Bouton de Réglage pour utilisation en chantier
Field Adjustment Knob
Use 20 - 12 AWG wire only.
Utiliser un fil 0,50 - 2,5 mm
2
seulement.
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
B2
LISTED
LED Driver 4RM5
Hi-lume ® Premier 0.1%
WARNING: Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT : Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle : 8-32 x 3/8” roulage de filets, dentelées
Cu
Al
1/4 in (6,5 mm)
Soft-on, Fade-to-Black
™
EcoSystem
™
/ 3-wire Constant Voltage LED Driver
Allumage doux, fondu au noir
EcoSystem
™
pilote 3-fil tension constante pour DEL
1 Thewirelessxturecontrolwillneedtohaveitslow-endlevelreprogrammedtodimto0.1%output.Formoredetailonadjustingthelow-endlightlevel,
refertoApplicationNote#556atwww.lutron.com,call1.877.346.5338(U.S.A.andCanadaonly),oremail[e-mail]
Hi-lume Premier 0.1% Constant Voltage Driver
ModelL3D0-96W24V-U
PowPakDimmingModule
ModelRMJ-ECO32-DV-B
OR
PowPakFixtureControl
1
ModelFCJ-ECO,FCJS-ECO
Pico Wireless Control
ModelPJ2-3BRL-GWH-L01
8

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 9 04.19.17
Wiring
L3D Models: 3-Wire Controls (third wire required for control signal)
Wiring Diagram
Compatible Controls without Soft-on, Fade-to-Black dimming technology: Lutron 3-Wire Controls5
Guaranteedperformancespecicationswiththecontrolslistedinthechartbelow.
Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1.877.346.5338(U.S.A.andCanada
only) or [e-mail]
Product Model Number Drivers per Control
2
Load Type Low-end Trim
Setting
120 V~277 V~120 V~277 V~
NovaT*dimmer N TF-10 - NTF-10 -277- 1 –16 1 – 19 — —
NTF-103P- N T F-10 3 P-277- 1 – 8 1 – 14 — —
Novadimmer NF-10- NF-10 -277- 1 – 16 1 – 19 — —
NF-103P- NF-103P-277- 1 – 8 1 – 14 — —
Skylarkdimmer SF-10P- SF-12P-277- 1 – 8 1 – 14 — —
SF-103P- SF-12P-277-3- 1 – 8 1 – 14 — —
Diva dimmer DVF-103P- DV F-10 3 P-277- 1 – 8 1 – 14 — —
DVSCF-103P- DVSCF-103P-277- 1 – 8 1 – 14 — —
Ariadnidimmer AYF-103P- AYF-103P-277- 1 – 8 1 – 14 — —
Maestrodimmer MAF-6AM- MAF- 6 A M -277- 1 – 6 1 – 14 — —
MSCF-6AM- MSCF- 6AM-277- 1 – 6 1 – 14 — —
MaestroWirelessdimmer MRF2-F6AN-DV- 1 – 6 1 – 14 — —
RadioRA2dimmer RRD-F6AN-DV- 1 – 6 1 – 14 Dual voltage
3-wire dimmer 21%
4
HomeWorksQSdimmer HQRD-F6AN-DV- 1 – 6 1 – 14 Fluorescent3-wire
LED 3-wire 21%
4
Interfaces
3
PHPM- 3F-120 - —1 – 16 – — —
PHPM-3F-DV- 1 – 16 1 – 38 — —
1 – 16 1 – 38 — —
BCI-0-10 1 – 16 1 – 38 — —
GPdimmingpanels Various 1 – 16 1 – 38 2-1 —
1 ForthemaximumwirelengthbetweentheLEDdriverandthestartofthelinearstrip,seechartsintheDriver Wiring and Mounting section.
2 Noderatingrequiredinmulti-gangapplicationsprovidedthatthexture-countdoesnotexceedthequantitylisted.
3 Pleaserefertointerfacespecicationsheetforcompatiblesystemlist.
4Trim level allows the ability to get to 0.1% but might result in dead travel for 1%—4% on user interface for some installations. In this instance, 22% trim level
couldbeusedtoavoiddeadtravelbutmightresultin>0.1%dimlevel.
5 Soft-on,Fade-to-Blackdimmingtechnologyisnotavailablefor3-wirecontrols.
Note:ForinformationaboutLegacyproductuseinexistingcontrolapplications,contact[e-mail]
Lutron
3-Wire
Dimmer/
Module/Panel Hi-lume
Premier
0.1 % Constant
Voltage
LED Driver
LED
Light
Engine
Dimmed Hot (DH)
L i n e / H o t
LED +
1
LED –
1
Neutral(N)
Neutral
Neutral Ground
Ground
SwitchedLine/Hot(L)
To line
voltage
9

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883d 10 04.19.17
Wiring (continued)
L3D Models: EcoSystem Digital Controls
Compatible Controls with Soft-on, Fade-to-Black dimming technology: Lutron EcoSystem Digital Controls
Guaranteedperformancespecicationswiththecontrolslistedinthechartbelow.
Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1.877.346.5338(U.S.A.andCanada
only) or [e-mail]
Product Model Number Recommended
System Version3Drivers per Control
120 V~277 V~
PowPakDimmingModulewithEcoSystem RMJ-ECO32-DV-B
URMJ-ECO32-DVB 5.9 or higher 32perEcoSystemlink
PowPak WirelessFixtureControlwithEcoSystem2FCJ-ECO
FCJS-ECO 0796554 or higher 3perEcoSystemlink
EnergiSavrNodeunitwithEcoSystem
QSN-1ECO-S,QSN-2ECO-S
QSN-2ECO-PS120
UQSN-1ECO-S,UQSN-2ECO-S
9.027 or higher 64perEcoSystemlink
GRAFIKEyeQSunitwithEcoSystem QSGRJ-_E
QSGR-_E —9.009 or higher 64perEcoSystemlink
QuantumLightManagementHub Q P 2-_ P_ C — 3.2 or higher
464perEcoSystemlink
HomeWorksQSwithEcoSystem
LQSE-2ECO-D
QSGRJ-_E
QSGR-_E
—10 or higher564perEcoSystemlink
1 ForthemaximumwirelengthbetweentheLEDdriverandthestartofthelinearstrip,seechartsintheDriver Wiring and Mounting section.
2 AlldevicesconnectedtoonePowPakWirelessFixtureControlwillbecontrolledtogether.Deviceswilldimtothesamelevelastheresultofacontrol
command.Thewirelessxturecontrolwillneedtohaveitslow-endlevelreprogrammedtodimto0.1%output.Formoredetailonadjustinglow-endlight
level,refertoApplicationNote#556atwww.lutron.com.
3 Forlowersystemversions,pleasevisitwww.lutron.com/LEDsystemchecktocheckifyoursystemrequireschanges.
4Version 3.1 (or later) is required to dim lower than 1%.
5Version 7.0 (or higher) is required to dim lower than 1%.
Hi-lume
Premier
0.1 % Constant
Voltage
LED Driver
ToEcoSystemDigitalLink
LED
Light
Engine
Line/Hot(L)
LED+
1
LED–
1
Neutral(N)
Ground
E1
E2
To line
voltage
10