Lutron Electronics Caseta Pico PD-6WCL User manual

1
0301710l 11/2022
Wireless
by Lutron
Advanced Installation GuideAdvanced Installation Guide
Dimmer &
PRO dimmer
PD-6WCL/PD-10NXD
Plug-in
lamp dimmer
PD-3PCL
ELV+ Dimmer
PD-5NE
Thank you for purchasing Caséta Wireless from Lutron. This document will guide you through several additional
installation topics beyond those covered in the quick-start guide included with your product.
Table of Contents
Switch
PD-5WS-DV /
PD-5ANS / PD-6ANS
3-Way Installation - If you have two switches controlling your lights, follow this procedure to install your dimmer or switch
With a Pico Remote Control
Dimmer with Pico Remote Control (PD-6WCL):............................................................................................................ Page 3 - 6
Switch with Pico Remote Control (PD-5WS-DV):.......................................................................................................... Page 7 - 10
PRO Dimmer with Pico Remote Control (PD-10NXD):................................................................................................. Page 11 - 14
Neutral Switch with Pico Remote Control (PD-5ANS / PD-6ANS):.............................................................................. Page 15 - 18
ELV+ Dimmer with Pico Remote Control (PD-5NE):..................................................................................................... Page 19 - 22
Fan Control with Pico Remote Control (PD-FSQN):..................................................................................................... Page 23 - 26
Diva Smart Dimmer with Pico Remote Control (DVRF-6L):......................................................................................... Page 27 - 30
Claro Smart Switch with Pico Remote Control (DVRF-5NS):...................................................................................... Page 31 - 34
With a Mechanical Toggle Switch
Switch with Mechanical Toggle Switch (PD-5WS-DV):................................................................................................ Page 35 - 37
PRO Dimmer with Mechanical Toggle Switch (PD-10NXD):........................................................................................ Page 38 - 40
Neutral Switch with Mechanical Toggle Switch (PD-5ANS / PD-6ANS):..................................................................... Page 41 - 43
Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L):................................................................................ Page 44 - 46
Claro Smart Switch with Mechanical Toggle Switch (DVRF-5NS): ............................................................................. Page 47 - 49
With a Wired Accessory
Diva Smart Dimmer with a Claro Smart Accessory Switch (DVRF-6L/DVRF-AS): .................................................... Page 50 - 53
Claro Smart Switch with a Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS): ................................................. Page 54 - 57
Multi-Location Installation - If you have three or more switches controlling your lights, follow this procedure to
install your dimmer or switch
With a Pico Remote Control
Dimmer with Pico Remote Controls (PD-6WCL):.......................................................................................................... Page 58 - 62
PRO Dimmer with Pico Remote Controls (PD-10NXD):............................................................................................... Page 63 - 67
Switch with Pico Remote Controls (PD-5WS-DV):........................................................................................................ Page 68 - 72
Neutral Switch with Pico Remote Controls (PD-5ANS / PD-6ANS):............................................................................ Page 73 - 77
ELV+ Dimmer with Pico Remote Controls (PD-5NE):................................................................................................... Page 78 - 82
Fan Control with Pico Remote Controls (PD-FSQN):................................................................................................... Page 83 - 87
Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) ......................................................................................... Page 88 - 92
Claro Smart Switch with Pico Remote Controls (DVRF-5NS) ...................................................................................... Page 93 - 97
With a Wired Accessory
Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS):....................................................... Page 98 - 102
Claro Smart Switch with with Claro Smart Accessory Switch (DVRF-5NS / DVRF-AS):............................................ Page 103 - 107
(continued on next page)
Fan Control
PD-FSQN
Motion Sensor
PD-OSENS /
PD-VSENS
Caséta Diva
Smart Dimmer
DVRF-6L
Caséta Claro
Smart Switch
DVRF-5NS
Caséta Claro Smart
Accessory Switch
DVRF-AS

2
by Lutron
Table of Contents (continued)
Adjusting the Low-End Trim - Follow this procedure if you experience performance issues such as flickering,
flashing or other abnormal light behavior when your dimmer is at a low light level
On a Dimmer (PD-6WCL): ......................................................................................................................................................Page 108
On a PRO Dimmer (PD-10NXD): ............................................................................................................................................Page 110
On an ELV+ Dimmer (PD-5NE): .............................................................................................................................................Page 112
On a Plug-In Lamp Dimmer (PD-3PCL): ......................................................................................................................... Page 114
On a Diva Smart Dimmer (DVRF-6L): ............................................................................................................................. Page 116
Adjusting the High-End Trim - Follow this procedure to adjust the maximum light output allowed by your
dimmer
On a Dimmer (PD-6WCL): ................................................................................................................................................ Page 109
On a PRO Dimmer (PD-10NXD): ..................................................................................................................................... Page 111
On an ELV+ Dimmer (PD-5NE): ....................................................................................................................................... Page 113
On a Plug-In Lamp Dimmer (PD-3PCL): ......................................................................................................................... Page 115
Converting a Plug-In Lamp Dimmer to a Switch to Control Non-Dim Loads (Lights Only) (PD-3PCL)
Follow this procedure if you would like your plug-in lamp dimmer to act as a switch for non-dimmable lighting loads...... Page 117
Setting Dimmer Phase on a Caséta Wireless ELV+ Dimmer (PD-5NE)....................................................... Page 118
Removing Paired Pico Remote Controls - Follow this procedure if you need to remove paired Pico remote
controls or reset your dimmer or switch to its factory default settings
From a Dimmer (PD-6WCL/PD-10NXD/PD-5NE/PD-3PCL):........................................................................................ Page 119
From a Switch (PD-5WS-DV/PD-5ANS/PD-6ANS):....................................................................................................... Page 120
From a Fan Control (PD-FSQN):..................................................................................................................................... Page 121
From a Lutron Shade:...................................................................................................................................................... Page 122
From a Diva Smart Dimmer (DVRF-6L): ......................................................................................................................... Page 124
From a Claro Smart Switch (DVRF-5NS):........................................................................................................................ Page 125
Changing the Favorite Light Level on a Pico Remote Control - Follow this procedure to change the
light level your dimmer recalls when you press the "Favorite" button on your Pico remote control....................................... Page 126
Changing the Favorite Light Level on an ELV+ Dimmer (PD-5NE) - Follow this procedure to change the
light level your dimmer recalls when you press the "Favorite" button on your Phase Selectable Dimmer............................. Page 127
Changing the Favorite Fan Speed Setting on a Fan Control (PD-FSQN) - Follow this procedure to
change the fan speed your control recalls when you press the "Favorite" button on your Fan Control................................. Page 128
Installing a LUT-MLC Load Adapter with an Switch (PD-5WS-DV) - The LUT-MLC is provided
to help ensure proper operation of the Caséta Wireless switch with LED, fluorescent, and ELV lighting loads..................... Page 129
Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) - ................................................. Page 130
Motion Sensor Advanced Features (PD-OSENS/ PD-VSENS) - ........................................................... Page 136
Troubleshooting - ............................................................................................................................................................ Page 137

3
by Lutron
1Identify existing wiring
Two switches control the lights (3-way installation)
2What you need for a 3-way installation
+
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4Turn power off at circuit breaker
5
Remove existing switch from wall
6Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL)
Location 1 Location 2
Dimmer
PD-6WCL
Pico remote control
with wall-mounting kit
PJ2-WALL
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your dimmer
- If three or more switches control the lights
(multi-location installation) See page 58 for details
Important note:
3Choose a location for your Caséta Wireless dimmer
Choose which location you want the Caséta Wireless dimmer installed in.
This will be Location 1.
Location 1
Location 1
Claro wallplate
CW-1
+

4
by Lutron
7Remove side sections (if necessary)
Do not remove outside side sections
on dimmers at the end of gang.
Each dimmer has inside
side sections removed.
Dimmer in the middle
has all side sections
removed.
Total Dimmable LED Wattage Incandescent/Halogen Total Wattage
0 W +600 W 500 W 400 W
1W – 25 W +500 W 400 W 300 W
26 W – 50 W +400 W 300 W 200 W
51 W – 75 W +300 W 200 W 100 W
76 W – 100 W +200 W 100 W 50 W
101 W – 125 W +100 W 50 W 0 W
126 W – 150 W +0 W 0 W 0 W
ABC
BB B CB
A
8Connect the Caséta Wireless dimmer
Tagged Wire
Ground
(Green Wire)
9Mount the Caséta Wireless dimmer
10 Attach the wallplate
‘snap’
11
Remove existing switch from wall at Location 2
3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL)
12 Tag and disconnect wires from the switch
Ground (Green / Bare Copper)
Different
Color
Screw
Important note:
Removing side sections reduces the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
When installing more than one Caséta Wireless dimmer in the same
wallbox, it is necessary to remove inner side sections prior to wiring. See
image and chart below for more information.
Wallplate
Adapter Wallplate
Location 1
Location 1
Location 2
Place tag - to identify wire on
different color screw
Location 2
Location 1

5
by Lutron
05
10
15
13 Connect the wires
Ground
14 Attach the wallplate bracket and Pico remote control
15 Attach the wallplate
‘snap’
16 Turn power on at circuit breaker
3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL)
Pairing the dimmer and Pico remote control
17 Press and hold "Off" button on dimmer
6
sec.
UNTIL
HOLD
Status LEDs flash
18 Press and hold "Off" button on remote control
Lights flash
three times
05
10
15
6
sec.
UNTIL
Wallplate
Adapter Wallplate
Location 2
Tagged Wire
Location 2
Location 2
Location 2
Location 1
Repeat steps 17 and 18 to pair additional
remote controls.
19 Pair additional remote controls
HOLD
3x

6
by Lutron
3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL)
Neutral
Pico
Remote
Control
Line/Hot
Traveler
Caséta
Wireless
Dimmer *
Ground
Load
LED
DEL
LFC
A
CFL
AFC
INC /
HAL
Schematic Diagram
Traveler
* Dimmer may be installed in either location.
Tagged Wire
Tagged Wire

7
by Lutron
1Identify existing wiring
Two switches control the lights (3-way installation)
2What you need for a 3-way installation
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4Turn power off at circuit breaker
5Remove existing switch from wall
6Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV)
Location 1 Location 2
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your switch
- If three or more switches control the lights
(multi-location installation) See page 68 for details
Important note:
3Choose a location for your Caséta Wireless switch
Choose which location you want the Caséta Wireless switch installed in.
This will be Location 1.
Location 1
Location 1
+
Switch
PD-5WS-DV
Pico remote control
PJ2-2B
+
Wallplate bracket
PICO-WBX-ADAPT
+
Two Claro wallplates
CW-1

8
by Lutron
7Ganging and derating
8Connect the new Caséta Wireless switch
Tagged Wire
Ground
(Green Wire)
9Mount the Caséta Wireless switch
10 Attach the wallplate
‘snap’
11
Remove existing switch from wall at Location 2
3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV)
12 Tag and disconnect wires from the existing switch
Ground (Green / Bare Copper)
Different
Color
Screw
Wallplate
Adapter Wallplate
Location 1
Location 1
Location 2
Place tag - to identify wire on
different color screw
Location 2
Location 1
BB B CB
A
PD-5WS-DV (120 V~)
LED 5 A 4 A 3 A
Halogen / incandescent 600 W 450 W 350 W
Electronic Low-Voltage 600 W 450 W 350 W
Magnetic Low-Voltage
1600 VA / 475 W 450 VA / 350 W 350 VA / 275 W
Fluorescent
25 A 4 A 3 A
General Purpose Fan 3 A 3 A 3 A
PD-5WS-DV ( 277 V~)
LED 5 A 4 A 3 A
Halogen / incandescent 1350 W 1100 W 800 W
Electronic Low-Voltage 1350 W 1100 W 800 W
Magnetic Low-Voltage
11350 VA / 1075 W 1100 VA / 875 W 800 VA / 625 W
Fluorescent25 A 4 A 3 A
AB C
AB C
1
The maximum lamp wattage is determined by the efficiency of the transformer, with
70% – 85% as typical. For actual transformer efficiency, contact either the fixture or
transformer manufacturer. The total VA rating of the transformer(s) shall not exceed the VA
rating of the switch.
2The switch is ULRListed for use with all magnetic and electronic fluorescent ballasts.
Black
Blue
Black

9
by Lutron
13 Connect the wires
Ground
14 Attach the wallplate bracket and Pico remote control
15 Attach the wallplate
‘snap’
16 Turn power on at circuit breaker
3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV)
Pairing the switch and Pico remote control
17 Press and hold "Off" button on switch
05
10
15
6
sec.
UNTIL
HOLD
Status LED flashes
18 Press and hold "Off" button on remote control
Lights flash
three times
05
10
15
6
sec.
UNTIL
Wallplate
Adapter Wallplate
Location 2
Tagged Wire
Location 2
Location 2
Location 2
Location 1
Repeat steps 17 and 18 to pair additional
remote controls.
19 Pair additional remote controls
HOLD
3x

10
by Lutron
3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV)
Neutral
Pico
Remote
Control
Line/Hot
Traveler
Caséta
Wireless
Switch *
Ground
(Green)
Load
LED
DEL
LFC
A
CFL
AFC
INC /
HAL
Schematic Diagram
Traveler
* Switch may be installed in either location.
Tagged Wire
Tagged Wire
Black
Blue
Black

11
by Lutron
1Identify existing wiring
Two switches control the lights (3-way installation)
2What you need for a 3-way installation
+
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4Turn power off at circuit breaker
5
Remove existing switch from wall
6Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD)
Location 1 Location 2
PRO dimmer
PD-10NXD
Pico remote control
with wall-mounting kit
PJ2-WALL
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your dimmer
- If three or more switches control the lights
(multi-location installation) See page 63 for details
Important note:
3Choose a location for your Caséta Wireless dimmer
Choose which location you want the Caséta Wireless dimmer installed in.
This will be Location 1.
Location 1
Location 1
Claro wallplate
CW-1
+

12
by Lutron
7Remove side sections (if necessary)
Do not remove outside side sections
on dimmers at the end of gang.
Each dimmer has inside
side sections removed.
Dimmer in the middle has all
side sections removed.
Total Dimmable LED Wattage Incandescent/Halogen Total Wattage
0 W +1000 W 800 W 600 W
1W – 25 W +900 W 750 W 550 W
26 W – 50 W +800 W 700 W 500 W
51 W – 75 W +700 W 600 W 450 W
76 W – 100 W +600 W 500 W 400 W
101 W – 125 W +500 W 400 W 300 W
126 W – 150 W +400 W 300 W 200 W
151 W – 175 W +300 W 200 W 100 W
176 W – 200 W +200 W 100 W 50 W
201 W – 225 W +100 W 50 W 0 W
226 W – 250 W +0 W 0 W 0 W
ABC
BB B CB
A
8Connect the Caséta Wireless dimmer
Tagged Wire
Ground
(Green Wire)
Red
White *
* If available,
connect the
neutral wire from
the wallbox to the
white wire on the
dimmer. If neutral
is not available,
cap the white
wire with a wire
connector.
Neutral required
for: MLV loads,
LED drivers,
PHPM-PA,
PHPM-3F,
GRX-TVI.
Black
Blue
9Mount the Caséta Wireless dimmer
10 Attach the wallplate
‘snap’
11
Remove existing switch from wall at Location 2
3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD)
12 Tag and disconnect wires from the switch
Ground (Green / Bare Copper)
Different
Color
Screw
Important note:
Removing side sections reduces the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
When installing more than one Caséta Wireless dimmer in the same
wallbox, it is necessary to remove inner side sections prior to wiring. See
image and chart below for more information.
Wallplate
Adapter Wallplate
Location 1
Location 1
Location 2
Place tag - to identify wire on
different color screw
Location 2
Location 1

13
by Lutron
13 Connect the wires
Ground
14 Attach the wallplate bracket and Pico remote control
15 Attach the wallplate
‘snap’
16 Turn power on at circuit breaker
3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD)
Pairing the dimmer and Pico remote control
17 Press and hold "Off" button on dimmer
05
10
15
6
sec.
UNTIL
HOLD
Status LEDs flash
18 Press and hold "Off" button on remote control
Lights flash
three times
05
10
15
6
sec.
UNTIL
Wallplate
Adapter Wallplate
Location 2
Tagged Wire
Location 2
Location 2
Location 2
Location 1
Repeat steps 17 and 18 to pair additional
remote controls.
19 Pair additional remote controls
HOLD
3x

14
by Lutron
3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD)
Neutral
Pico
Remote
Control
Line/Hot
Traveler
Caséta
Wireless
Dimmer *
Ground
Load
LED
DEL
LFC
A
CFL
AFC
INC /
HAL
Schematic Diagram
Traveler
* Dimmer may be installed in either location.
Tagged Wire
Tagged Wire
Black White
(optional)
Red
Blue
If available, connect the neutral wire
from the wallbox to the white wire on the
dimmer. If neutral is not available, cap the
white wire with a wire connector.
Neutral required for: MLV loads, LED
drivers, PHPM-PA, PHPM-3F, GRX-TVI.

15
by Lutron
1Identify existing wiring
Two switches control the lights (3-way installation)
2What you need for a 3-way installation
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4Turn power off at circuit breaker
5Remove existing switch from wall
6Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS)
Location 1 Location 2
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your switch
- If three or more switches control the lights
(multi-location installation) See page 73 for details
Important note:
3Choose a location for your Caséta Wireless switch
Choose which location you want the Caséta Wireless switch installed in.
This will be Location 1.
Location 1
Location 1
+
Switch
PD-5ANS/PD-6ANS
Pico remote control
PJ2-2B
+
Wallplate bracket
PICO-WBX-ADAPT
+
Two Claro wallplates
CW-1
Neutral
connection
required

16
by Lutron
7Remove side sections (if necessary)
Do not remove outside side sections
on switches at the end of gang.
Each switch has inside side
sections removed.
Switch in the middle has
all side sections removed.
8Connect the new Caséta Wireless neutral switch
Tagged Wire
Ground
(Green Wire)
9Mount the Caséta Wireless neutral switch
10 Attach the wallplate
‘snap’
11
Remove existing switch from wall at Location 2
3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS)
12 Tag and disconnect wires from the existing switch
Ground (Green / Bare Copper)
Different
Color
Screw
When installing more than one Caséta Wireless switch in the same wallbox,
it is necessary to remove inner side sections prior to wiring. See image and
chart below for more information.
Wallplate
Adapter Wallplate
Location 1
Location 1
Location 2
Place tag - to identify wire on
different color screw
Location 2
Location 1
Important note:
Removing side sections reduces the switch’s maximum wattage rating.
See the chart below for maximum wattage information.
1Neutral required.
2
The maximum lamp wattage is determined by the efficiency of the transformer, with
70% – 85% as typical. For actual transformer efficiency, contact either the fixture or
transformer manufacturer. The total VA rating of the transformer(s) shall not exceed the VA
rating of the switch.
3The switch is ULRListed for use with all magnetic and electronic fluorescent ballasts.
Red
Blue
Black
BB B CB
A
PD-5ANS/PD-6ANS (120 V~)
1
LED 6 A 6 A 5 A
Halogen / incandescent 720 W 720 W 600 W
Electronic Low-Voltage 720 VA 720 VA 600 VA
Magnetic Low-Voltage
2720 VA 720 VA 600 VA
Fluorescent
36 A 6 A 5 A
General Purpose Fan 3.6 A 3.6 A 3.6 A
AB C
White
Neutral
connection
required

17
by Lutron
13 Connect the wires
Ground
14 Attach the wallplate bracket and Pico remote control
15 Attach the wallplate
‘snap’
16 Turn power on at circuit breaker
3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS)
Pairing the switch and Pico remote control
17 Press and hold "Off" button on switch
05
10
15
6
sec.
UNTIL
HOLD
Status LED flashes
18 Press and hold "Off" button on remote control
Lights flash
three times
05
10
15
6
sec.
UNTIL
Wallplate
Adapter Wallplate
Location 2
Tagged Wire
Location 2
Location 2
Location 2
Location 1
Repeat steps 17 and 18 to pair additional
remote controls.
19 Pair additional remote controls
HOLD
3x

18
by Lutron
3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS)
Neutral
Pico
Remote
Control
Line/Hot
Traveler
Caséta
Wireless
Switch *
Ground
(Green)
Load
LED
DEL
INC /
HAL
Schematic Diagram
Traveler
* Switch may be installed in either location.
Note: The red wire must be connected to the load and the black wire must be connected to Line/Hot. The product will not work if the wires
are reversed.
Tagged Wire
Tagged Wire
Red
Blue
Black
White

19
by Lutron
1Identify existing wiring
Two switches control the lights (3-way installation)
2What you need for a 3-way installation
+
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4Turn power off at circuit breaker
5
Remove existing switch from wall
6Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Access to
Neutral is
required
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE)
Location 1 Location 2
ELV+ dimmer
PD-5NE
Pico remote control
with wall-mounting kit
PJ2-WALL
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your dimmer
- If three or more switches control the lights
(multi-location installation) See page 78 for details
Important note:
3Choose a location for your Caséta Wireless dimmer
Choose which location you want the Caséta Wireless dimmer installed in.
This will be Location 1.
Location 1
Location 1
Claro wallplate
CW-1
+

20
by Lutron
7Remove side sections (if necessary)
Do not remove outside side sections
on dimmers at the end of gang.
Each dimmer has inside
side sections removed.
Dimmer in the middle
has all side sections
removed.
PD-5NE (120 V~)1
Incandescent/Halogen Total Wattage
LED 250 W 250 W 250 W
Halogen / Incandescent 500 W 400 W 300 W
Electronics Low-Voltage 500 W 400 W 300 W
Magnetic Low Voltage 400 VA 400 VA 400 VA
ABC
BB B CB
A
8Connect the Caséta Wireless dimmer
Tagged Wire
Black Wire
Red Wire
White Wire
(Neutral Required)
Ground
(Green Wire)
9Mount the Caséta Wireless dimmer
10 Attach the wallplate
‘snap’
11
Remove existing switch from wall at Location 2
3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE)
12 Tag and disconnect wires from the switch
Ground (Green / Bare Copper)
Different
Color
Screw
Important note:
Removing side sections reduces the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
When installing more than one Caséta Wireless dimmer in the same
wallbox, it is necessary to remove inner side sections prior to wiring. See
image and chart below for more information.
Wallplate
Adapter Wallplate
Location 1
Location 1
Location 2
Place tag - to identify wire on
different color screw
Location 2
Location 1