Luvele ECLIPSE MEAT GRINDER User manual

LUVELE ECLIPSE MEAT GRINDER Instruction
Booklet
LEMG1200WUK
co.uk

Congratulations
on the purchase of your new Luvele Eclipse Meat Grinder
• Remove all packaging before using your Meat Grinder for the first time.
• Do not place Grinder near the edge of a bench or table during operation.
• Ensure the surface is level, free of liquids or other substances.
• Do not place your Meat Grinder on or near a hot stove or oven.
• Always use extreme care when handling the blade and cutting plates.
• Unplug from power outlet when not in use, before putting on or taking off
attachments, and before cleaning.
• Only use the pusher that is supplied with this Meat Grinder.
• Do not put your fingers or any utensil into the head.
• Do not put hot meat into the meat grinder.
• All attachments should be removed with care before cleaning.
• Only use the accessories provided and recommended by Luvele.
• Do not overload the Meat Grinder.
• Do not place any parts of the Grinder in a dishwasher or microwave oven.
• Do not immerse the body of the Meat Grinder in water or other liquids.
• Never operate damaged appliance (incl. Mains cable).
• Operate appliance only through a professionally installed socket
supplying the correct voltage and do not use extension cables.
• Never remove main cable with wet hands, or lay cable on hot surface, or let
cable come into contact with oil.
• Unplug the appliance after each use, when the appliance is not in use and
before changing accessories or cleaning appliance.
• Do not try and perform any maintenance, other than cleaning. For any
maintenance issues please contact Luvele Australia/UK/EU.
• Do not operate outdoors.
• This appliance is not intended for use by young children or infirm persons
without supervision.
• Use a fire blanket only to extinguish fires on appliance.
• The appliance is not designed for commercial or industrial use; it is for
household use only.
INSTRUCTION | P3
Safety
Please read all instructions before using the Luvele Meat
Grinder. Keep these instructions for future reference.

This appliance is intended to be used in household and similar applications
such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential type environments;
- Bed and breakfast type environments
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children 8 years and above can use this appliance, however, they should
be supervised to ensure that they do not play with the appliance. Children
should not play with the appliance.
Cleaning and user maintenance shall not be made by children unless they
are older than 8 years old and supervised.
Keep the appliance and its cord out of reach of children less than 8 years.
Check the power supply cord for damage from time to time. If the power
supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
Use only designated accessories enclosed. This appliance is not intended to
be operated by means of external timer or separated remote-control
system.
INSTRUCTION | P5
Safety
INSTRUCTION | P4
Basic
Features
1. Kibbe Attachment #1
2. Kibbe Attachement #2
3. Sausage Nozzle 32mm
4. Sausage Nozzle 22mm
5. Sausage Nozzle 16mm
6. Cutting Plate 3mm
7. Cutting Plate 5mm
8. Fixing Ring
9. Cutting Plate 8mm
10. Cutting Plate 12mm
11. Sausage Filling Plate
12. Cutting Blade
13. Grind Screw
Reverse Mode
Half Power
Full Power
CONTROL DIAL
14. Head
15. Head Inlet
16. Quick Release Lock
17. Control Dial
18. Body
19. Hopper Plate
20. Food Pusher

INSTRUCTION | P7
INSTRUCTION | P6
Basic
Features
Before using your Luvele Meat Grinder
Wash all attachments in warm soapy water using a mild detergent. Dry
each part thoroughly before use.Before you assemble the Meat Grinder
ensure that the power cord is unplugged.
NOTE: All attachments must be firmly in place before using the appliance.
IMPORTANT: Do not place any parts of the Grinder in a dishwasher
or microwave oven
Reverse Mode
Use the reverse mode if there is a blockage. If the Meat Grinder is in
operation then turn control dial to the stop position, wait for 30 seconds,
then turn the control dial to ‘Reverse’ setting to clear blocked food..
IMPORTANT: Do not select the reverse button while the Meat Grinder is in
operation. The motor must have completely stopped. Once the blockage
has been cleared unplug the appliance and clean out remaining food from
the head of the Meat Grinder.
Half Mode
Half mode is used when a slower grinding speed is required.
Recommended for sausage and kibbe making.
IMPORTANT: Do not operate Meat Grinder for more than 10 minutes at
a time. Allow motor to cool for 10 minutes after 10 mintues of operation.
The appliance is not designed for commercial or industrial use; it is
for household use only.
Place cutting blade into head
BASIC ASSEMBLY STEPS
1 2
3 4
6
7
5
Insert head into body of grinder Press down quick release lock
Place grinding screw into head Place blade onto grinding screw
Place cutting plate into head Screw fixing ring on
Place hopper plate on head
Cutting plate options;
3mm, 5mm, 8mm, 12mm
& sausage filling plate
Basic
Features

INSTRUCTION | P9
INSTRUCTION | P8
Operating Operating
!PLEASE NOTE:
Please note: The head can be fixed into the grinder body prior to the
accessories being attached if desired and as shown on page 6.
damage the appliance.
IMPORTANT:
The flat side of the cutting blade should be facing the cutting plate
!CAUTION:
Do not use anything else apart from the food pusher supplied
with this meat grinder to push meat through the head. NEVER use your
hands or fingers to push meat through the head. (Fig.2)
1
2
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
FITTING AND USING THE CUTTING BLADES
Place the Meat Grinder body, facing you on a level, dry surface.
Fit the grinding screw inside the head.
Fit the blade over the grinding screw ensuring that the flat side of
the blade faces the cutting plate, away from the grinding screw.
Fit the cutting plate (depending on the type of mince you require).
The fixing ring then fits over the cutting plate and screws into
place.
Align the head into the grinder
body.Screw the fasten button
into place.
Before use, ensure all
elements are securely in
place.
Place a bowl underneath the fixing ring for mince collection and
the hopper plate on top of the head.
Place prepared meat into the hopper plate. Plug the power cord
into a 230-240V AC power outlet and turn control dial to the ON
position.
Using the food pusher, gently push meat through the head.
When grinding is complete, turn the dial to the off position to stop
grinder.
STEP
10
STEP
8
STEP
9
STEP
11
!NOTE:
Do not use excessive
force to push meat
through the head as it
could damage the
appliance.

INSTRUCTION | P11
INSTRUCTION | P10
Operating Operating
MAKING SAUSAGES 4
Fit the Sausage cutting plate, followed by the small, medium or large stainless
steel sausage nozzle. (Fig.1)
5
The fixing ring then fits over the sausage nozzle and screws into
place. Do not tighten the fixing ring yet as it will be harder to lock into the
grinder body.
6
Align the head into the grinder body. Screw the fasten button into place.
7
Once the grinder body is in place, tighten the fixing ring and ensure all
8
Place the hopper plate on top of the head.
9
Place prepared sausage mix or unprocessed meat on to the hopper plate.
Plug the power cord into a 230-240V AC power outlet and press the ‘ON’ button.
1
2
1
Place the meat grinder body, facing you on a level, dry surface.
2Fit the grinding screw inside the head.
3
Fit the blade over the grinding screw ensuring that the flat side of the blade
!PLEASE NOTE:
Do not use excessive force to push meat through the head as it could
damage the appliance.
10Using the food pusher, gently push sausage mix or meat through the head.
11As the mixture comes through the nozzle, ease the skin off as it fills. Twist
the skin at the desired length to form individual sausages once all of the
casings are filled.
!CAUTION:
Do not use anything else apart from the food pusher supplied with
this meat grinder to push meat through the head. NEVER use your hands or fingers
to push meat through the head. this meat grinder to push meat through the head.
NEVER use your hands or fingers to push meat through the head.

INSTRUCTION | P13
INSTRUCTION | P12
Operating Operating
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
1
2
3
FITTING AND USING THE KIBBE ATTACHMENTS
MAKING KIBBE
STEP
8
STEP
9
Place the meat grinder body, facing you on a level, dry surface.
Fit the grinding screw inside the head.
Fit the kebbe attachment. (Fig.1)
Secure the kibbe attachments with the fixing ring. Loosely secure
with fixing ring.
Align head into the grinder body. Screw and tighten the fastening
button, ensuring all elements are securely in place. (Fig.2)
Place the hopper plate on top of the head.
Plug the power cord into a 230-240V AC power outlet and press
the ‘ON’ button.
Using the food pusher, push the kibbe mixture into the head.
(Fig.3)
Cut kibbe into desired lengths.

INSTRUCTION | P15
INSTRUCTION | P14
Hints & Tips
• Remove all large pieces of fat from meat before grinding.
• For fatty cuts of meat we recommend that you cut meat into 5cm cubes.
We also recommend using the 8mm cutting plate for fatty cuts of meat.
If the 4mm cutting plate is used and there is excess fat in the meat it can
cause the fat to block the grinder head. This should be avoided.
For lean cuts of meat; cut into strips approximately 15cm long and 5cm
thick or into cubes.
• Remove any bones from meat as this may damage the grinder.
• To make sure that all meat has come through mincing, place a 20cm sheet
of crushed baking paper into the grinder after the last piece of meat.
This will push through any remaining meat and will not damage the grinder.
• If changing cutting plates or changing to another attachment, always ensure
that any meat that is around the fixing ring or blade is removed. This will
• Unused fresh casings must be drained, covered with salt and frozen.
• Sausages should be stored in an airtight container or sealed with cling
film in the refrigerator.
• A good way to make sure that all the sausage mince has come through the
mincer is to break up 1-2 slices of bread and push though mincer, this will
force any remaining mixture into the casing.
• Gentle cooking over medium heat prevents interior from boiling which in turn
bursts the skin, leaking out moisture and flavour. This then produces a hard
textured product.
HITS FOR GRINDING MEAT HINTS FOR SAUSAGE MAKING CONT.
• Salt is an important component of sausage making. It is responsible for the control
of growth of micro-organisms. It also aids in dissolving the myosin (protein) out of the
muscle fibres which then acts as a glue to bind the meat.
• Freshly made sausages are better when allowed to sit in the refrigerator for a
minimum of 12 hours and for up to 24 hours.
• Fresh sausages are highly perishable products as they do not contain the
preservatives that are present in most store-bought sausages. They should be
cooked within 2-3 days of being made or frozen.
• Ideally, sausages should contain up to 30% fat content to provide a tender and
moist product.
• Sausages should be thoroughly cooked to kill all microbes. Internal temperatures
must reach 70-75°c.
• Intentional piercing of sausage skin releases much needed moisture but
prevents the sausage from possibly splitting and being disfigured.
• Things to look for when making sausages:
Choose good quality ingredients - Fat to meat ratio (30:70) - Spices and
seasoning should be combined in amounts that compliment the meat type.
• Casings (skin) can be purchased from butchers that supply your fresh meat.
If preserved in salt, it should be soaked in lukewarm
HINTS FOR SAUSAGE MAKING
Hints & Tips
Cleaning
When you have completed grinding, unplug the meat grinder from the power outlet.
Ensure that all accessories and attachments are washed thoroughly with hot, soapy
water.
IMPORTANT: Do not place any parts of the Grinder in a dishwasher.
To remove meat that is stuck in the fine and medium cutting plates, use hot, soapy
water and a scrubbing brush, clean thoroughly.
Ensure that all attachments are thoroughly cleaned and free of
meat to prevent contamination. Then dry thoroughly before storing.
NOTE: Always unplug the grinder to clean. Do not wash/immerse the
grinder body in water – clean this part only by wiping using a damp cloth.
!
WARNING:
Take care in washing all attachment components to ensure that there are no
food particles left in/around the cutting plates, sausage/kebbe making attach-
ments, blade and grinding screw. We do not recommend dishwashing any
of the mincing attachments.

The complete Luvele range of products is backed by our 1 Year Total Cover Warranty.
Our warranty will covers any manufacturing fault with the product and will also cover
damage caused during transit. Your warranty starts from the purchase date of your
Luvele product.
Please visit www.luvele.co.uk/warranty to register your warranty. If your product was
ordered through a seperate retailer then please keep store invoice for warranty claims.
Warranty Process
We want to make any warranty claim as simple as possible for you. All you need to do
is contact us at [email protected] and provide us information about the problem
you are having with your item. Firstly, we will suggest some troubleshooting ideas to
establish whether or not the issue can be fixed without a return. Photos of the fault may
be requested if and where appropriate,and if it will ensure a faster resolution.
Generally, if you have an issue with your item within 30 days of receiving it, we will
email you a prepaid return label that can be printed out and used to send the item
back with. We will then generally send you a brand new item. The new item will be
shipped within 48 hours of receiving the faulty item back. A confirmation email will be
send when your faulty item is received back.
If you have an issue after the 30 day period we will consider repairing your
item if suitable. If it cannot be repaired it will be replaced with a brand new
item. Refunds will only be offered within the 30 day money back guarantee,
if you choose this option over a new replacement. Outside of this 30 day
period, your item will be repaired or replaced.
Pease email us and the best solution to meet your needs will be offered.
[email protected] | luvele.co.uk
INSTRUCTION | P16
Warranty
LUVELE ECLIPSE MEAT GRINDER
Instruction booklet LEMG1200WUK