LUXE BIDET Neo 110 User manual

LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE
LUXE
LUXE
LUXE
LUXE
AssemblyInstruction
LUXE Bidet R
NAMES AND FUNCTIONS OF PARTS
*Please note: illustrations may vary depending on the model
Note: You may not need to use this
part from the kit since a typical water
connection is a flexible metal hose with
a15/16” toilet tank connection and
9/16” wall connection.
Flexible Water Supply Hose
1/2” T-Adapter
Connection
1/4” Bidet
Connection
22” Length
TM TM TM
NEO110, NEO120, & NEO180
1
2
Remove the seat by
unscrewing the seat.
Place the bidet on the toilet. Plates may be
adjusted depending on where the two holes
in the back of the toilet are.
Bidet should now be
aligned with the
coupling holes.
3
Screw the seat back
on to the bidet and
the toilet.
45
7a
Installation Tools You May Need
Wrench Screwdriver(flat)
The top of the t-adapter
connects with the water tank.
15/16”
15/16”
1/2”
Rubber Washer
Toilet Tank
Connection
Bidet Hose
Connection
Toilet Hose
Connection
Water Inlet
Water Flow Control Knob
Adjustable Plates
Nozzle Guard Gate
Nozzle Mode Knob
Wash Nozzle
Plastic T-Adapter
Top View of Toilet
Shut off the toilet water supply.
Flush toilet to empty the tank.
6a 6b
6a: Make sure that there is a
black rubber washer inserted
at the top of the t-adapter.
6b: If it is not already there,
insert it as shown in figure 6b.
Toilet
Water
Supply
Valve
Toilet
Water
Supply
Valve
15/16” Toilet Tank Connection
9/16” Toilet Water Supply Connection
LUXE Bidet R
7
7b
7a: Make sure you have shut off the toilet water supply and flushed the
toilet to empty the tank. Disconnect the water connection from the tank.
7b: Connect the plastic T-adapter to the water supply as shown in figure 7b.
PARTS
Flexible Metal
Braided Hose
Connecting Water Supply
Tip: Do not use excessive force while tightening the connection. Hand tighten
then use a wrench to gently tighten one quarter or half-turn more.

9
8
Connect the metal braided hose to the t-adapter.
TROUBLESHOOTING
2Go Products, LLC
C
For more information, visit www.LuxeBidet.com.
AssemblyInstruction
LUXE Bidet R
TM TM TM
NEO110, NEO120, & NEO180
LUXE Bidet R
Connect the metal braided hose to the bidet inlet
Toilet
Water
Supply
Valve
Toilet
Water
Supply
Valve
After installing the bidet, the toilet seat sits at an angle and no longer rests on the toilet bowl.
Apply adhesive rubber bumpers to the bottom of the seat to eliminate the gap.
Bumpers are available for purchase when you go to www.LuxeBidet.com/accessories.
When the bidet is on, no water comes out of the spray nozzle.
Solution 1: Gently pump the nozzle up and down by hand. It may simply be stuck.
Solution 2: Check that the t-adapter has been drilled all the way through so water can
flow through it. If the t-adapter is blocked, please contact us for a replacement.
Water is leaking from a connection
Solution 1: Try reconnecting the t-adapter to ensure that all threads are catching
properly and that the connection is properly tightened.
Solution 2: If you have difficulty properly tightening the t-adapter to your toilet tank
connection, try wrapping a thin layer of plumbing tape over the toilet tank threads
before connecting the t-adapter. The plumbing tape will allow for added grip.
Solution 3: If you continue to experience a drip from the t-adapter or any other connec-
tion, please contact us.
For other questions or concerns, please contact us at
www.LuxeBidet.com
For additional troubleshooting tips, please see our FAQS page at www.LuxeBidet.com.
15/16”
15/16”
1/2”
Rubber Washer
Toilet Tank Connection
Bidet Hose
Connection
Toilet Hose Connection
Metal T-Adapter with Shut-Off Valve
(Cold Water)
Shut-Off
Valve
This metal t-adapter has a shut-off valve to limit or cut off cold water to the
bidet. It can be used instead of the plastic t-adapter for the cold water
connection.
OPTIONAL ACCESSORY
Available for Purchase at www.LuxeBidet.com/accessories
ASSEMBLED UNIT
TRYING YOUR BIDET FOR THE FIRST TIME
Congratulations! You are ready to use the LuxeBidet for the first time. Gently turn the
water pressure control knob to reach your desired spray pressure. The control only
regulates water pressure, not the duration of the spray.
Water
Tank
T-Adapter
Flexible Water
Supply Hose
Toilet Water Supply Valve
Main Body of Bidet
Stool
Bidet Controls
Toilet Seat
Flexible Metal
Braided Hose
The working pressure of this product is 50+20 psi
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE
LUXE
LUXE
LUXE
LUXE