LUXE BIDET Neo 70 User manual

Luxe Bidet Neo 70 Installation Manual
Neo 70 Installation Video: https://luxebidet.com/installation#neo70
Step 1: Turn off the toilet tank water supply and flush the toilet to empty the tank.
Step 2: Place a towel or bucket underneath the toilet tank connection to catch any water that
may spill out from the toilet tank.
Step 3: Disconnect the toilet tank water supply hose from the toilet tank connection.

Step 4: Connect the top connection of the t-adapter to the toilet tank. Make sure the black
rubber washer is securely inserted (as shown in the picture) before connecting.
Tip: Do not use excessive force while tightening the connection. Hand tighten then, if needed,
use a wrench to gently tighten one quarter or a half-turn more.
Step 5: Connect the toilet tank hose to the bottom connection of the t-adapter.

Step 6: Connect one end of the bidet hose to the side connection of the t-adapter.
Step 7: Connect the other end of the bidet hose to the threads at the bottom of the bidet
sprayer head. Make sure the black rubber washer is securely inserted (as shown in the picture)
before connecting.
Step 8: Turn the handle on the t-adapter to open the valve and allow water flow to the bidet.

Step 9: Turn on the toilet tank water supply.
Step 10: Use the provided screws to mount the bidet holster on the wall.
Congratulations! You have completed your Neo 70 installation. If you have any questions or
comments, feel free to contact us at [email protected]. We hope you enjoy your
new Luxe Bidet Neo 70!