LUXE BIDET Neo 250 User manual

LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE
LUXE
LUXE
LUXE
LUXE
Nozzle Mode Knob
Cold & Hot Water Inlet
Water Flow Control Handle
Adjustable Plates
Wash nozzle
Femine Nozzle
AssemblyInstruction
LUXE Bidet R
Nozzle Guard Gate
2
Remove the seat by unscrewing the seat.
Place the bidet on the toilet.
Plates may be adjusted
depending on where the two
holes in the back of the toilet are.
3
Top View of Toilet
Bidet should now be aligned with
the coupling holes.
4
Note: You may not need to
use this part from the kit since
a typical water connection is a
flexible metal hose with a15/16”
toilet tank connection and 9/16”
toilet water supply connection.
Flexible Water Supply Hose
1/2” T-Adapter Connection
1/4” Bidet Connection
22” Length
15/16”
15/16”
1/2”
Rubber Washer
Toilet Tank Connection
Bidet Hose
Connection
Toilet Hose Connection
Plastic T-Adapter
(Cold Water)
15/16” Toilet Tank Connection
9/16” Toilet Water
Supply Connection
PARTS
Flexible Metal Braided Hose
(Cold Water)
Bidet
Connection
1/4”
Metal
Wing Nut
10’ Length
Metal T-Adapter
Connection
8 mm
Polyurethane Hose
(Hot Water)
Hot Water Inlet Cap
with Rubber Washer
3/8”
Wing
Nut
8 mm
3/8”
Sink Hose
Connection
Sink Water
Connection
(Wall Outlet)
Bidet Hose
Connection
Metal T-Adapter
(Hot Water)
Rubber Washer
OPTIONAL PARTS
Note: You only need this part if you
do not connect the hot water. See
troubleshooting for more details.
1
Shut off the toilet water supply.
Flush toilet to empty the tank.
Toilet
Water
Supply
Valve
Screw the seat back on to the bidet
and the toilet.
5
TM
LUXE Bidet
R
TM
NEO250 & NEO320
NAMES AND FUNCTIONS OF PARTS
*Please note: illustrations may vary depending on the model
Installation Tools
You May Need
Wrench
Screwdriver(flat)

LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE
LUXE
LUXE
LUXE
LUXE
6a 6b
6a: Make sure that there is a black rubber washer inserted at the top of the
t-adapter.
6b: If it is not already there, insert it as shown in figure 6b.
Connecting Cold Water Supply
The top of the t-adapter
connects with the water tank.
7
7a
Toilet
Water
Supply
Valve
7b
Toilet
Water
Supply
Valve
9
8
Connect the metal braided hose to the plastic t-adapter.
Toilet
Water
Supply
Valve
Connect the metal braided hose to the cold water bidet inlet
7a: Make sure you have shut off the toilet water supply and flushed the
toilet to empty the tank. Disconnect the water connection from the tank.
7b: Connect the plastic t-adapter to the water supply as shown in figure 7b.
Tip: Do not use excessive force while tightening the connection. Hand tighten
then use a wrench to gently tighten one quarter or half-turn more.
Rubber Washer
6Preparing the Plastic T-Adapter
AssemblyInstruction
LUXE Bidet R
TM
LUXE Bidet R
TM
NEO250 & NEO320

LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE
LUXE
LUXE
LUXE
LUXE
11a
11c
Connecting Hot Water Supply
11
11b
11e
Hot Water
Connection
Cold Water
Connection
11d
11c: Unscrew the wing nut from the metal t-adapter.
11d: Thread the polyurethane hose through the wing nut and push the end onto
the adapter.
11e: Tighten the wing nut onto the t-adapter threads to secure the connection.
11g: Attach the metal end of the hose to the hot water bidet inlet.
Metal
T-Adapter
Sink Sink
11a: Disconnect the sink
hot water connection.
11b: Connect the metal t-adapter on the hot water connection.
OPTIONAL: Cut polyurethane hose
on the end that does not have a wing nut
according to bathroom dimensions. 2Go Products, LLC
C
For more information, visit www.LuxeBidet.com.
ASSEMBLED UNIT
TRYING YOUR BIDET FOR THE FIRST TIME
Congratulations! You are ready to use the LuxeBidet for the first time. Gently turn
the water pressure control knob to reach your desired spray pressure. The control
only regulates water pressure, not the duration of the spray.
Plastic T-Adapter
(Cold Water)
Polyurethane Hose
(Hot Water)
Toilet Water
Supply Valve
Metal T-Adapter
(Hot Water)
Hot Water Valve
Cold Water Valve
Flexible Water
Supply Hose
Bidet
The working pressure of this product is 50+20 psi
Rubber Washer
10a: Make sure that
there is a black rubber
washer inserted at the
bottom of the t-adapter.
10b: If it is not already
there, insert it as shown
in figure 10b.
10a 10b
Preparing the Metal T-Adapter
10
AssemblyInstruction
LUXE Bidet R
TM
LUXE Bidet R
TM
NEO250 & NEO320
Back View of Bidet
Cold Hot
11f

LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE Bidet
LUXE
LUXE
LUXE
LUXE
LUXE
Connecting the hot water supply hose.
If you have trouble pushing the polyurethane hose onto the t-adapter, hold the
hose end under hot running water to expand it slightly and try again. If you need
a hose longer than 10 feet, you may purchase a 16 foot 8 mm polyurethane
hose at www.LuxeBidet.com/accessories.
TROUBLESHOOTING
For additional troubleshooting tips, please see our FAQs page at www.LuxeBidet.com.
Using the bidet with only cold water.
To use the bidet with only the cold water
connected, screw the bidet inlet cap included
with the accessories onto the hot water bidet
inlet. This will prevent any backflow while the
bidet is operated.
After installing the bidet, the toilet seat sits at an angle and no longer
rests on the toilet bowl.
Apply adhesive rubber bumpers to the bottom of the seat to eliminate the gap.
Bumpers are available for purchase when you go to
www.LuxeBidet.com/accessories.
When the bidet is on, no water comes out of the spray nozzle.
Solution 1: Gently pump the nozzle up and down by hand. It may simply be
stuck.
Solution 2: Check that the t-adapter has been drilled all the way through so
water can flow through it. If the t-adapter is blocked, please contact us for a
replacement.
Water is leaking from a connection.
Solution 1: Try reconnecting the t-adapter to ensure that all threads are catching
properly and that the connection is properly tightened.
Solution 2: If you have difficulty properly tightening the t-adapter, try wrapping a
thin layer of plumbing tape over the toilet tank or sink valve threads before
connecting the t-adapter. The plumbing tape will allow for added grip.
Solution 3: If you continue to experience a drip from the t-adapter or any other
connection, please contact us.
For other questions or concerns, please contact us at
www.LuxeBidet.com
OPTIONAL ACCESSORIES
Available for Purchase at www.LuxeBidet.com/accessories
Bidet
Connection
1/4”
Metal
Wing Nut
Metal T-Adapter
Connection
8 mm
16’ Polyurethane Hose
(Hot Water)
Bidet
Connection
1/4”
Metal
Wing Nut
Metal T-Adapter
Connection
8 mm
9’ Metal Braided Hose
(Hot Water)
This polyurethane hose is a longer
version of the hose included with the
bidet.
The polyurethane hose included with
the bidet for hot water connection can
be replaced with this 9’ metal braided
hose. Please note that the length
cannot be adjusted.
1/2”
Wing
Nut
8 mm
1/2”
Sink Hose
Connection
Sink Water
Connection
(Wall Outlet)
Bidet Hose
Connection
Metal T-Adapter
(Hot Water)
Rubber Washer
Some households have a 1/2” hot
water connection rather than the
provided 3/8”.
15/16”
15/16”
1/2”
Rubber Washer
Toilet Tank Connection
Bidet Hose
Connection
Toilet Hose Connection
Metal T-Adapter
with Shut-Off Valve
(Cold Water)
Shut-Off
Valve
This metal t-adapter has a shut-off
valve to limit or cut off cold water to
the bidet. It can be used instead of the
plastic t-adapter for the cold water
connection.
2Go Products, LLC
C
For more information, visit www.LuxeBidet.com.
AssemblyInstruction
LUXE Bidet R
TM
LUXE Bidet R
TM
NEO250 & NEO320