Luxor LLTS12 User manual

LLTS12 Assembly Guide
Part List:
1
2
3
4
5
6
7
8
9
10
11
1 x Left Side Panel
1 x Left Back Panel
1 x Right Side Panel
1 x Right Back Panel
1 x Top Panel
1 x Bottom Panel
1 x Back Door Panel
1 x Left Door Panel
1 x Right Door Panel
1 x Handle
7 x Shelf Panel
Hardware List:
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
14 x Small Screw (M6 x 12mm)
20 x Large Screw (M8 x 20mm)
20 x Washer (M8)
2 x Straight Caster
2 x Locking Swivel Caster
18 x Metal Screw (M4 x 10mm)
4 x Handle Screw (M8 x15mm)
4 x Handle Lock Washer (M8)
4 x Handle Washer (M8)
28 x Shelf Clip
Tool List:
Required Tool (not supplied):
1 x Large Phillips Screw Driver
www.luxorfurn.com
May 2012
H1H1 H2 H3 H6 H7 H8 H9

12
Attach the left back (1) to the left side panel (2).
Attach the right back (2) to the right side panel (4).
Place the assembled left (1&2) and right side (3&4) onto
the top panel (5). Screw into place with 10 screws (H1).
34
Place the bottom panel (6) onto the assembly.
With a light force, secure into place.
Screw the bottom into the assembly with 4 screws (H1),
and 4 larger washer and screws (H2&H3).
10 x
A
A
B
B
4 x
5
1 & 3 3 & 4
2 & 4 1 & 2
6
H1
H1
H1
4 x
H2 & H3
H2 & H3

56
Attach the casters (H4 & H5) to the assembly
with 16 screws and washers (H2 & H3).
Attach the small back door (7) to the assembly
with 6 screws (H6).
78
Attach the left and right front doors (8 & 9) to the
assembly with 12 screws (H6).
Using the supplied Allen wrench, Attach the handle (10)
to the assembly with 4 screw, lock washers
and washers (H7, H8 & H9).
H4
8
9
16 x
6 x
4 x
H2 & H3
H5
H6
H6
H2 & H3
12 x
H6
H7, H8 & H9
H7, H8 & H9
10
7
H6

910
Stack the 7 shelves (11) into the
assembly.
Evenly distribute the 28 shelf clips (H10)
along the shelf rails, and lock them into
place. Set the shelves (11) on the clips.
You have completed the assembly.
28 x
H6
11
11