Luxul XVS-F5 User manual

Simply Connected
Use the XVS-F5 to:
Extend Your Home or Offi ce Network
Deliver Fast Ethernet Connectivity at the Network Edge
Set-up a Dedicated Network for Optimizing VoIP, Video,
Security, or Gaming Applications (when used with a
managed switch)
Quick Install Guide
XVS-F5
5-Port Mini Fast Ethernet Switch
Use the XVS-F5 to:

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685
p: 801-822-5450
2
Quick Install Guide
XVS-F5
Quick Install Guide
Model Number: XVS-F5
5-Port Mini Fast Ethernet Switch
© 2015 Luxul. All Rights Reserved.
No part of this publication may be modified or adapted in any way,
for any purposes without permission in writing from Luxul. The mate-
rial in this manual is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, func-
tion, or design. No license is granted, either expressly or by implication
or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained
in this or any Luxul product.
DOCUMENT CONVENTIONS
The following graphical alerts are used to indicate notable situations:
NOTE: Tips, hints, or special requirements that you should
take note of.
CAUTION: Care is required. Disregarding a caution can
result in data loss or equipment malfunction.
WARNING!: Indicates a condition or procedure that could
result in personal injury or equipment damage.

3
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered
Trademarks are property of respective holders.
Simply Connected
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CONTACT LUXUL
Sales
P: 801-822-5450
E: [email protected]
Technical Support
P: 801-822-5450
E: suppor[email protected]
PACKAGE CONTENTS
Please check the contents carefully after you open the packing:
 XVS-F5 5-Port Mini Fast Ethernet Switch
 Power Adapter and Cord
 Quick Install Guide
If any of the listed items are missing or damaged, please contact
the reseller from whom you purchased the XVS-F5 for return/
replacement.
HARDWARE DESCRIPTION
Front Panel
The front panel of the XVS-F5 includes 5 Link/Activity LEDs, one
power LED, four PoE Status LEDs and one PoE Max LED. Please refer to
the detailed description of these indicators in Section 2.2 below.

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685
p: 801-822-5450
4
Quick Install Guide
XVS-F5
XVS-F5 Front Panel View
LED Indicators
The LED indicators of the XVS-F5 include 5 Link/Activity LEDs, one
power LED, four PoE Status LEDs and one PoE Max LED. These LED
indicators show the operating status of the XVS-F5 and each switch
connection.
The following chart shows the LED indicators of the XVS-F5 along with
an explanation of the indicator’s properties:
LED Color Status Description
Power Green ON This indicator lights up when
the XVS-F5 is powered
— OFF If this indicator is not lit, please
check the DC power supply to
ensure proper connection to
the outlet and the XVS-F5.
PoE Max Red ON Maximum output wattage
reached
— OFF Maximum output wattage not
reached

5
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered
Trademarks are property of respective holders.
Simply Connected
PoE Status Green ON Delivering PoE power to con-
nected device
OFF No PoE power being delivered
LINK/ACT Green ON Indicates the XVS-F5 is con-
nected at 100Mbps.
Blinking Indicates the XVS-F5 is transmit-
ting/receiving data packets at
100Mbps.
— OFF Indicates the port is not con-
nected to a device.
100Mbps Green ON 100Mbp device connected
—OFF 10Mbp device connected
Rear Panel Layout
The Rear Panel of the XVS-F5 includes eight 10/100Mbps RJ-45
Ethernet ports.
XVS-F5 Rear Panel View
CAUTION: Please use the included power supply. If a
different power supply is used, it could damage
the XVS-F5

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685
p: 801-822-5450
6
Quick Install Guide
XVS-F5
PREPARING FOR INSTALLATION
System Requirements
Ethernet Cables to connect the XVS-F5 to Ethernet enabled
devices
 Power should be AC 100-240V~ 1.4A(Max) 50/60Hz.
Installation Requirements
Install the XVS-F5 in a stable/safe place to avoid any possible
damage
Inspect the AC power cord to ensure that it is correctly connected
and undamaged
To avoid electric shock, DO NOT open the XVS-F5 housing (no
user serviceable parts inside). Opening the XVS-F5 will void your
warranty.
It is recommended that the Grounding connection to the outlet is
functioning properly and the XVS-F5 is positioned away from direct
sun light
Ensure there is sufficient space around the XVS-F5 for proper
ventilation and heat dissipation. It is recommended to have at least
4-6 inches around all sides.
Before Connecting to the Network
Before connecting the XVS-F5 to the network, please check the
following:
 Determine placement location. Do not place any heavy articles on
the XVS-F5 .
 Ensure there is adequate space for proper heat dissipation and
ventilation around the XVS-F5 .

7
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered
Trademarks are property of respective holders.
Simply Connected
 Power socket should be within 4 feet of the XVS-F5 .
 Check power adapter to confirm safe and secure connection.
XVS-F5 INSTALLATION
Connecting Devices
Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the
XVS-F5 to a device as described below. The XVS-F5 will automati-
cally adjust to the characteristics (speed/duplex) of the device to
which it is connected. The PoE function is autosensing. As long as the
powered device is 802.3af compliant, the switch will provide power.
NOTE: Legacy PoE devices or 802.3at devices that need
more that 15.4Watts can not be powered by the
switch
3
21 4 5
Connecting the XVS-F5 to a Device
When a device is properly connected, the Link/Activity LEDs for each
port lights up green/orange. Please refer to the LED Indicators section
for definitions and troubleshooting.
When a device is properly connected, the Link/Activity/Speed LEDs

LUX-QIG-XVS-F5-v2
1125141131v2
a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
Information on this document supersedes all previous versions. Products and
documents subject to change without notice. Products may be discontinued
without notice.
for each port lights up green. Please refer to the LED Indicators section
for definitions and troubleshooting.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions may cause harmful
interference to radio communications. However; there is no guarantee that in-
terference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah,
84020, declares that this Luxul XVS-F5 is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC.
For a copy of this report send a self addressed stamped
envelope to: Luxul CE, 14203 Minuteman Drive, Suite 201, Draper,
Utah, 84020.