Lynx yellobrik OET 19 0 Series User manual

Technical Specications
10G Fiber-TR slots 2 x 10 Gigabit SFP+ slots
Supports 10GBase-T SFP, 10GBase-X, 1000Base-T
IEEE 802.3ae
10GBase-LR SFP 1310nm wavelength - singlemode
Duplex LC connector
Max. distance 20km
10GBase-MM SFP 850nm wavelength - multimode
Duplex LC connector
10GBase-CWDM
SFP
1470/1490/1510/1530/1550/1570/1590/1610nm wavelength
Duplex LC connector
10GBase-T SFP 10 Gigabit Ethernet via Cat6a/Cat7 cable
RJ-45 connector
Cable distance up to 30m
10GBase-BD SFP 1270nm or 1330nm wavelength - bidirectional
Full Duplex LC connector
LED 3 x LED (1x Power LED, 2x Signal present LED)
Power +12V DC @ 4.7W with SFPs ( supports 7 - 15V DC input range )
Physical Size: 120mm x 42mm x 22mm (4.73” x 1.65” x 0.86”) including
connectors
Weight: 125g (4.4oz)
OET 19X0(MM/MS/MC)
10Gbit/s Ethernet to Fiber Transceiver
We are constantly adding more yellobrik modules.
Please visit our website for the latest product updates.
www.lynx-technik.com
WARNING
CLASS 1 LASER PRODUCT
A Class 1 laser is safe under all conditions of normal use. This means the
maximum permissible exposure (MPE) cannot be exceeded when viewing
a laser with the naked eye or with the aid of typical magnifying optics
(e.g. telescope or microscope). An unsafe power level may be collected by a
magnifying optic with a larger aperture.
The optical port should be terminated with an optical connector or a dust plug.
DC Power Input
USB
Port 2
Port 1
Reset Button
Power
Port 2 Active
Port 1 Active
Reset
USB
Note: OET 1910 is shown, OET 1940 and variants have identical layout
Ethernet/Fiber
Transceiver
Port 1 Port 2
WARNING
CLASS 1
Laser Product
10Gbit
1Gbit
RST
PC - Control
mini USB
12V 0V
⎓
Power
yellobrik
®
Quick
Reference
yellobrik
®
LYNX
Technik
AG |
www.lynx-technik.com

Power Lead Strain Relief
The module has a small hole in the case which is located above the
power connection. This prevents the power lead being accidentally
pulled out. Use the supplied tie-wrap and secure the lead as shown
below.
Optional Mounting Solutions
The optional RFR 1001 mounting bracket can be used to permanently
mount the module on any surface or on 19” rack rails.
The optional RFR 1000-1 rack mount can be used to permanently
mount up to 14 yellobrik modules. In addition, the RFR 1000-1 can
provide full power redundancy for all mounted yellobriks.
Operation is fullly automatic. The data rates are automatically detected,
set accordingly to 10Gbit/s or 1Gbit/s and transmitted/received via the
optical connections. The module has two fully independent SFP cages
for various combinations of connections.
The module supports hot swapping and hot plugging of connections.
No user settings are provided for this module.
Monitoring via RCT 1012 or a direct PC connection is possible.
Operation
Note: OET 19X0 is identical in terms of mounting and securing.
Connections
Power
The module requires a +12V DC power input and an LED is provided to
conrm power is connected. A power supply is included with the mo-
dule. If applying a third party power supply, please provide a low noise
power source between +7 and +15V DC.
The module power consumption is approximately 4.7W nominal.
OET 1910
Basic
Singlemode ◄► Copper -MM Multimode ◄► Copper
OET 1940
Basic CWDM
Singlemode ◄► Copper -MS Multimode ◄► Singlemode -MC Multimode ◄► CWDM
OBD 1910
-E
Copper ◄► BiDi-Singlemode ◄► Copper (Pair of modules)
-MM
Multimode ◄► BiDi-Singlemode ◄► Multimode (Pair of modules)
OET
1910
OET
1940
OET 1940 E
Type A
OET 1940 E
Type B
OET 1940 MM
Type A
OET 1940 MM
Type B
OET
1910 MM
OET
1940 MS
OET
1940 MC
OH-TR-10G-LC OH-TR-10G-LC-MM
OH-TR-10G-XXXX-LC
OH-BD-10G-1270-LC
OH-BD-10G-1270-LC
OH-TR-10G-LC-MM OH-TR-10G-LC-MM
OH-TR-10G-RJ45 OH-TR-10G-RJ45
OH-TR-10G-RJ45
OH-TR-10G-RJ45
OH-TR-10G-LC-MM
OH-TR-10G-RJ45
OH-TR-10G-LC-MM
OH-TR-10G-LC OH-TR-10G-XXXX-LC
OH-BD-10G-1330-LC
OH-BD-10G-1330-LC