made for movement Innowalk User manual

INNOWALK
In and out quickguide
UNLEASH
POTENTIAL!

You should always check the following before use:
1. Belts
2. Chest and Hip support
3. Back attachment to seat
4. Guide-strap
5. Leg support
6. Electrical system
7. Covers
8. Remote control
9. Strange sounds
10. Test all functions
If any abnormalities, errors or damages are discovered during
pre-check or use, please contact your Made for Movement
representative.
Pre-check
Scan the code for
more information

Secure the chest strap.
Position the heel towards the back of
the foot plate.
Place the user’s leg in the calf bow and
attach the guidestring.
For Innowalk Large: Attach the strap for
the anti-overstretch on the calf bow.
Secure with straps.
Open all straps. Place Innowalk in sitting position.
Transfer the user into the Innowalk. It is recommended
to use a personal lifter.
Place the user well back on the seat.
Transfer the user into the Innowalk
1
3
5
4NB
2

Attach necessary accessories
Secure the hip belt.Hold on to the guide-string to control the tension
when moving from sitting to standing.
Attach and adjust the table. Attach the string for the anti-
overstretch on the calf bow.
Attach shoulder straps. Handle for arm motion.
NOTE! Adjust tension of the guide-string
Release tension of the guide-string by
using the free-coupling.
Push the red button and release the
lock. Adjust the tension by using the
handle. Tension increases by turning
the handle down to present mark.
For Innowalk Large: Attach the strap for
the anti-overstretch on the calf bow.
Note! When adjusted, it is important to keep the same position every time the product
is in use.
Innowalk Small Innowalk Medium Innowalk Large
78
Start the movement and adjust
the speed to the user’s needs.
Make sure that the user is
standing and moving in an
optimal position.
Table Anti-overstretch Shoulder straps Handles
6

Remove the table, shoulder straps, strap for anti-
overstretch and release the hip support.
Release the straps over the feet. Release the guide-string and the calfbow.
Release the chest support and transfer the user out of the
Innowalk. It is recommended to use a personal lifter.
Hold on to the guide-string to control the tension when
moving from standing to sitting.
NOTE!
Only trained users/assistive persons are allowed to operate the Innowalk.
Transfer the user out of the Innowalk
1
3 4
5
2
Our highly skilled and
experienced consultants
advice in optimal
transfer techniques.

[phone]
madeformovement.com
For more information
please contact us
Subject to printing errors / MfM-EN-1021 / © 2021 Made for Movement AS All rights reserved.